Lasko 18" Stand Fan with Cyclone Grill (Model S18902)

Important Safety Instructions

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

• Read all instructions before using this fan.
• Use this fan only as described in this manual. Other uses not recommended may cause fire, electric shock, or injury to persons.
• To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.
• This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
• Do not leave the fan running unattended.
• Always unplug the fan when moving it, or whenever the fan is not in use.
• Do not operate any fan with a damaged cord or plug or after the fan malfunctions, has been dropped or damaged in any manner.
• Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
• Do not insert or allow fingers or foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the fan.
• Do not block air intakes or exhaust in any manner.
• Do not use outdoors.
• This fan is not intended for use in wet or damp locations.
• Always place the fan on a stable, flat surface during operation.
• Do not hang or mount fan on a wall or ceiling.
• This fan is not suitable for use in agricultural facilities including areas where livestock, poultry or other animals are confined. Please refer to National Electric Code (NEC) Article 547-7 (2008), or applicable state or local codes or standards relating to electrical requirements for Agricultural Buildings.
• This fan is not suitable for use in hazardous locations. Please refer to National Electric Code (NEC) Article 500 or applicable state or local codes or standards relating to electrical requirements for Hazardous locations.

Product Overview

The Lasko 18" Stand Fan with Cyclone Grill (Model S18902) is designed to provide efficient and quiet cooling for various indoor spaces. It features a durable construction and user-friendly controls.

Figure 1: Lasko 18" Stand Fan, showing the fan head, adjustable stand, and round base.

Key Features:

• Widespread oscillation for maximum cooling area.
• Adjustable height up to 54.5 inches.
• Three energy-efficient speed settings.
• Simple, tool-free assembly.
• Quiet operation suitable for large spaces.

Setup and Assembly

The Lasko 18" Stand Fan is designed for simple, no-tools assembly. Follow these steps to set up your fan:

1. Unpack Components: Carefully remove all parts from the packaging. Ensure all components listed in the "Included Components" section are present.
2. Assemble the Base: Attach the fan pole to the round base. Twist or secure according to the design until it is firm and stable.
3. Attach the Stand Pole: Insert the adjustable stand pole into the base assembly. Ensure it is securely seated.
4. Mount the Fan Head: Place the fan motor housing onto the top of the stand pole. Secure it using the provided locking mechanism or screw.
5. Assemble Grills and Blades:
   • Attach the rear grill to the motor housing.
   • Mount the fan blades onto the motor shaft, securing them with the blade cap.
   • Attach the front grill, ensuring it snaps securely into place with the rear grill.
6. Adjust Height: Loosen the height adjustment collar on the stand pole, extend or retract the pole to your desired height, and then tighten the collar firmly.
7. Positioning: Place the fan on a firm, level surface. Ensure there is adequate space around the fan for proper air circulation and oscillation.

Note: No tools are required for the assembly process.

Operating Instructions

Follow these steps to operate your Lasko Stand Fan:

1. Power Connection: Plug the fan's power cord into a standard 120V AC electrical outlet. Ensure the outlet is in good condition and not overloaded.
2. Turn On/Speed Selection: Locate the control knob on the fan's motor housing.
   • Rotate the knob to select your desired speed setting:
     • 0: Off
     • 1: Low Speed
     • 2: Medium Speed
     • 3: High Speed
3. Oscillation Control: To activate the widespread oscillation feature, push down the oscillation knob located on top of the motor housing. To stop oscillation, pull the knob up.
4. Tilt Adjustment: To adjust the vertical angle of the fan head, gently tilt the fan head up or down to direct airflow as needed. The fan head will hold its position.
5. Turning Off: To turn off the fan, rotate the control knob to the "0" (Off) position. For extended periods of non-use, unplug the fan from the electrical outlet.

Maintenance and Care

Proper maintenance ensures the longevity and efficient operation of your Lasko Stand Fan. Always unplug the fan before cleaning or performing any maintenance.

Cleaning:

• Exterior: Use a soft cloth dampened with a mild soap solution to wipe the exterior surfaces of the fan. Do not use harsh cleaners or abrasive materials.
• Grills and Blades: Dust and lint can accumulate on the fan grills and blades. Periodically, use a vacuum cleaner with a brush attachment or a soft, dry cloth to remove dust. For thorough cleaning, the front grill may be carefully removed (refer to assembly instructions in reverse) to access the blades. Ensure all parts are completely dry before reassembling and operating the fan.
• Motor: The motor is permanently lubricated and requires no oiling.

Storage:

When storing the fan during off-season, it is recommended to:

• Store the fan in its original carton or cover it to protect it from dust.
• Store it in a cool, dry place.

Troubleshooting

If your Lasko Stand Fan is not operating as expected, refer to the following common issues and solutions:

If the problem persists after trying these solutions, please refer to the Warranty and Support section for further assistance.

Specifications

Warranty and Support

For warranty information, technical support, or to inquire about replacement parts, please contact Lasko customer service directly or visit their official website.

Please have your model number (S18902) and date of purchase available when contacting support.

Lasko Website: www.lasko.com