Lasko 18" Adjustable Pedestal Fan

Safety Instructions

General Warnings (⚠️ WARNING)

To reduce the risk of fire, electrical shock, or personal injury, always follow these important safety instructions and warnings:

• Do not use this fan in areas where flammable liquids or vapors are used, stored, or present, including paints, gasoline, varnishes, floor refinishing products, or solvents. Always read and follow all warnings and instructions on the containers for these products.
• Always ensure the plug fits tightly into the outlet. Loose plugs may slip partially out of the outlet and create a poor connection, potentially causing outlets to overheat and creating a fire hazard. Outlets in this condition should be replaced by a qualified electrician.
• Always unplug the power cord before servicing, cleaning, or moving the fan. Do not use the ON/OFF switch as the sole means of disconnecting power.
• Never leave children unattended when the fan is on or plugged in. Always turn off and unplug the fan when not in use.
• Be certain that the power source for the fan is 120V AC. Do not plug the fan into 240V or other power sources.
• The Blue Plug™ on your Lasko fan is a safety feature. It contains a non-replaceable safety device (fuse) that should not be removed or tampered with. To reduce the risk of fire, electric shock, and personal injury, do not attempt to remove, replace, repair, or tamper with the originally supplied plug. If the fan has stopped functioning, it may be due to the safety device incorporated in this plug.
• This fan has a polarized plug (one blade is wider than the other). This plug is designed to fit into the outlet only one way. Match the wide blade to the wide slot in the outlet and fully insert. Do not attempt to bypass or defeat this safety feature. If the plug does not fit in the outlet, consult a qualified electrician. The outlet may need to be replaced.
• To reduce the risk of fire, electric shock, or injury to persons, do not use replacement parts that have not been recommended by the manufacturer (e.g., parts made at home using a 3D printer).

Precautions (❗ CAUTION)

• Avoid the use of extension cords, power strips, power taps, outlet-style air fresheners, or other cord-connected devices, as these devices may overheat and cause a fire hazard.
• Do not operate any fan with a damaged cord or plug. Discard the fan or return it to an authorized service facility for examination and/or repair.
• Do not route the power cord under rugs, carpets, runners, or furniture. This may damage the cord or cause it to overheat, creating a fire hazard.
• Always place the fan on a stable, flat, level surface while in operation to prevent the fan from overturning.
• Never insert or allow fingers or objects to enter grill openings while the fan is in operation, as injury and/or damage to the fan may occur.
• Do not block, cover, or obstruct airflow to or from the fan while in operation.
• Do not run the cord under carpeting. Do not cover the cord with throw rugs, runners, or similar coverings. Do not route the cord under furniture or appliances. Arrange the cord away from traffic areas and where it will not be tripped over.
• Never use a single extension cord to operate more than one fan or other electrical device.
• Do not use this fan if it has been damaged or is not functioning properly.
• Remote controls for other appliances or electronic equipment can sometimes interfere with the operation of this fan. If this occurs, move the fan to another location.
• Keep the fan remote control unit away from chairs and your bed where it may be sat or laid upon and inadvertently turn on the fan.
• This fan does not meet the requirements of NEC Article 547-7 (2008). This fan is not suitable for use in agricultural facilities, including areas where livestock, poultry, or other animals are confined. Please refer to the National Electric Code (NEC) Article 547-7 (2008), or applicable state or local codes or standards relating to electrical requirements for agricultural buildings.
• This fan does not meet the requirements of NEC Article 500 (2008). This fan is not suitable for use in hazardous locations. Please refer to the National Electric Code (NEC) article 500 or applicable state or local codes or standards relating to electrical requirements for hazardous locations.

Parts Included

• 1. Front Grill
• 2. Rear Grill
• 3. Spinner
• 4. Nut
• 5. Ornament
• 6. Blade
• 7. Head Assembly
• 8. Pipe
• 9. Base

Assembly

For a quick assembly video, visit: www.lasko.com/how-to

1. Assemble the fan head components (grills, blade, spinner, ornament).
2. Loosen the nut on the pipe, extend the pipe upwards, and then tighten the nut to secure the height.
3. Twist the pipe downwards into the base to connect them.
4. Twist the assembled head unit down onto the top of the pipe.

Operation

Oscillation

To make the fan head move from side to side:

• Push down the Oscillation Knob located on the motor housing.
• Position: Up = Stationary, Down = Oscillate.

Tilt

To adjust the direction of airflow:

• Simply tilt the fan head up or down.

Controls

Fan Speed Button:

• Fan speed can be adjusted to 1 (Low), 2 (Medium), or 3 (High).

Maintenance

• Always unplug the cord before moving, servicing, or cleaning.
• Never place the fan in or near water.
• To help remove lint and dirt from inside the fan, use a vacuum equipped with a brush attachment.
• Clean the body of the fan with a soft cloth only.
• Never use alcohol or solvents such as gasoline, benzene, paint thinner, or other harsh cleaners.

Troubleshooting Tips

If your fan fails to operate, see below for a list of probable causes and solutions:

• Ensure the power cord is plugged into a working electrical outlet.

Storage

Store the fan with these instructions, in the original carton, in a cool, dry place.

Lubrication

The motor is permanently lubricated. No maintenance is required.

Disposal

Corrugated packaging materials are recyclable. For environmentally responsible disposal of this product, contact your local waste service provider or visit www.1800recycling.com.

Lasko Products, LLC Limited Warranty

(Valid in U.S. and Canada Only)

What this warranty covers: This product is warranted against defects in workmanship and/or materials.

How long this warranty lasts: This warranty extends only to the original purchaser of the product and lasts for one (1) year from the date of original purchase or until the original purchaser sells or transfers the product, whichever first occurs.

What Lasko will do: During the warranty period, Lasko will, at its sole option, repair or replace any part or parts that prove to be defective or replace the whole product with the same or comparable model. For all warranty claims, the product must be returned to Lasko Products, LLC at customer's expense with proof of purchase within the warranty period. Contact the Lasko customer service department to obtain a Return Authorization ("RA"). Do not return products without an RA, or the warranty claim will not be processed.

What this warranty does not cover: This warranty does not apply if the product was damaged or failed because of accident, improper handling or operation, shipping damage, abuse, misuse, or unauthorized repairs made or attempted. This warranty does not cover shipping costs for the return of products to Lasko for repair or replacement. Lasko will pay return shipping charges from Lasko following warranty repairs or replacement.

Limitations: Any and all warranties, expressed or implied (including, without limitation, any implied warranty of merchantability), last one year from the date of original purchase or until the original purchaser sells or transfers the product, whichever first occurs. In no event shall Lasko's liability under any express or implied warranty include (i) incidental or consequential damages from any cause whatsoever, or (ii) replacement or repair of any house fuses, circuit breakers, or receptacles. Notwithstanding anything to the contrary, in no event shall Lasko's liability under any express or implied warranty exceed the purchase price of the product, and any such liability shall terminate upon the expiration of the warranty period.

Some states and provinces do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so these exclusions or limitations may not apply to you. This warranty gives you specific legal rights. You may also have other rights which vary from state to state and province to province.

Proof of purchase is required before a warranty claim will be accepted.

Customer Service

Email: producthelp@lasko.com

Web: www.lasko.com

The Customer Service team is available to assist with product service questions and replacement parts. They can be reached Monday through Friday, 8 AM - 9 PM Eastern Time. Please have your model number available, as well as the type and style (located on the underside of your product).

Customer Service Dept.,
820 Lincoln Ave., West Chester, PA 19380
(Please do not send product to this location)

Product Registration

Register your product today to benefit from efficient and enhanced support and future product updates.