Introduction
This manual provides essential information for the safe and efficient operation, setup, and maintenance of your MSpa Model B-110 Silver Cloud Hot Tub. Please read this manual thoroughly before installation and use to ensure proper functionality and longevity of your product.
The MSpa B-110 is designed to provide a relaxing bubble spa experience, featuring a durable 3-layer laminated PVC construction and an integrated control system.
Product Features
- Patented Built-in Control Box: Features touch button controls for ease of use.
- Premium Construction: Made from 3-layer Laminated PVC for enhanced durability.
- Water Capacity: Holds 184 Gallons (approximately 696 liters) of water.
- Air Bubble Jets: Equipped with 110 air bubble jets for a soothing massage experience.
- Integrated Heater: Powerful 675W x 2, 0.9HP x 2 heater, capable of reaching a maximum temperature of 104°F (40°C).
Setup Instructions
Setting up your MSpa B-110 hot tub is designed to be straightforward. Ensure you have a flat, stable surface for placement, capable of supporting the weight of the filled hot tub and its occupants.
Image: The MSpa B-110 Silver Cloud Hot Tub, shown inflated and empty, illustrating its form factor before filling.
- Unpacking: Carefully remove all components from the packaging. Inspect for any damage.
- Placement: Position the hot tub on a clean, level surface. Ensure adequate space around the tub for access and maintenance. Note that this item is typically delivered curbside; arrange for additional assistance if delivery to a specific location on your property is required.
- Inflation: Connect the inflation hose to the hot tub's inflation valve and the built-in control box. Activate the inflation function. The hot tub will inflate automatically. Ensure it is firm but not over-inflated.
- Filter Cartridge Installation: Install the filter cartridge into its housing according to the diagrams in the quick start guide (refer to your product packaging for detailed diagrams).
- Filling: Fill the hot tub with fresh water using a garden hose. Fill to the recommended water level indicated on the interior of the tub.
- Power Connection: Plug the power cord into a grounded electrical outlet. Ensure the outlet meets the electrical requirements specified in the product specifications.
Operating Instructions
Once set up and filled, your MSpa B-110 is ready for operation. The integrated control panel allows for easy management of heating and bubble functions.
Image: The MSpa B-110 Silver Cloud Hot Tub in operation, filled with water and generating bubbles, positioned on an outdoor deck.
- Power On: Press the power button on the control panel to activate the system.
- Heating: Press the heater button. The display will show the current water temperature. To adjust the target temperature, press the temperature button until the numbers blink on the display, then use the arrow buttons to increase or decrease the setting. The maximum heating temperature is 104°F (40°C). Note that initial heating from cold water can take approximately 24 hours.
- Bubble Function: Press the bubble button to activate the 110 air bubble jets. Press again to turn them off.
- Filtration: The filtration system operates automatically to keep the water clean. Ensure the filter cartridge is clean for optimal performance.
Maintenance
Regular maintenance is crucial for the longevity and hygienic operation of your MSpa hot tub. This includes water treatment, filter cleaning, and periodic draining.
Image: A detailed view of the MSpa B-110 hot tub's interior, highlighting the pleated wall design for comfort and structure.
- Water Chemistry: Regularly test and adjust water chemistry (pH, alkalinity, sanitizer levels) using appropriate spa chemicals. Maintaining proper water balance prevents damage to the tub and ensures a safe bathing environment.
- Filter Cleaning/Replacement: Clean the filter cartridge frequently, ideally after every few uses, by rinsing it with water. Replace the filter cartridge every 1-2 months, or more often depending on usage and water quality.
- Draining and Cleaning: Periodically drain the hot tub completely. This task is designed to be easy and quick. Clean the interior surfaces with a soft cloth and mild, non-abrasive cleaner. Rinse thoroughly before refilling.
- Winterization/Storage: If storing the hot tub for an extended period or during cold weather, ensure it is completely drained, cleaned, and dry. Deflate and store in a protected area away from extreme temperatures.
Troubleshooting
This section addresses common issues you might encounter with your MSpa B-110 hot tub. For problems not listed here, or if solutions do not resolve the issue, please contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Hot tub not heating or displaying error code. | Heater malfunction, filter blockage, or sensor error. |
|
| Bubbles are weak or not working. | Air pump issue or blockage in air jets. |
|
| Water is cloudy or dirty. | Insufficient filtration, improper water chemistry, or heavy usage. |
|
Specifications
| Attribute | Detail |
|---|---|
| Model Number | B-110B |
| Product Dimensions | 180.34 x 180.34 x 71.12 cm (71 x 71 x 28 inches) |
| Item Weight | 24.95 kg (55 lbs) |
| Brand | MSpa |
| Color | Silver w/Smart Inflation |
| Material | Polyvinyl Chloride (PVC) |
| Shape | Square |
| Water Capacity | 184 Gallons |
| Air Bubble Jets | 110 |
| Heater Power | 675W x 2, 0.9HP x 2 |
| Max. Heat Temperature | 104°F (40°C) |
| Manufacturer | Golden Designs Inc |
| Date First Available | 8 July 2013 |
Warranty and Support
The MSpa Model B-110 Silver Cloud Hot Tub typically comes with a 1-year manufacturer's warranty covering defects in materials and workmanship from the date of purchase. Please refer to your original purchase documentation or the warranty card included with your product for specific terms, conditions, and registration details.
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact MSpa customer support. Contact information is usually provided in the product packaging or on the manufacturer's official website. It is recommended to have your model number (B-110B) and proof of purchase ready when contacting support.
