1. Product Overview
The Planet IGS-801M is an 8-Port 10/100/1000Base-TX Industrial SNMP Switch designed for robust network connectivity in harsh environments. Featuring an IP30 aluminum case, it supports a wide operating temperature range from -40 to 75 degrees Celsius, making it suitable for industrial applications requiring high reliability and performance.
Figure 1: Front view of the IGS-801M Industrial SNMP Switch. This image displays the compact, rugged design with eight Gigabit Ethernet ports and status LEDs for power, fault, link, and activity.
2. Key Features
- 8-Port Gigabit Ethernet: Provides 8 x 10/100/1000Base-TX RJ45 ports for high-speed network connections.
- Industrial Grade Design: IP30 rated aluminum case for protection against dust and harsh conditions.
- Wide Operating Temperature: Operates reliably in extreme temperatures from -40°C to 75°C (-40°F to 167°F).
- SNMP Management: Supports Simple Network Management Protocol for remote monitoring and management.
- DIN-Rail and Wall-Mountable: Flexible installation options for various industrial environments.
- Redundant Power Input: Features dual DC power inputs for enhanced reliability.
- High Performance: Non-blocking wire-speed forwarding for optimal data throughput.
3. Setup Guide
3.1 Package Contents
Before proceeding with the installation, please verify that your package contains the following items:
- IGS-801M Industrial SNMP Switch
- Quick Installation Guide
- DIN-Rail mounting kit
- Terminal block connector for power input
3.2 Physical Installation
The IGS-801M can be installed on a standard DIN-rail or mounted on a wall. Ensure the installation location is well-ventilated and within the specified operating temperature range.
- DIN-Rail Mounting: Attach the DIN-rail clip to the rear of the switch. Hook the top of the clip onto the DIN-rail and push the bottom until it snaps into place.
- Wall Mounting: Use the provided wall-mount brackets (if applicable) and screws to secure the switch to a flat surface. Ensure adequate clearance for cabling and ventilation.
Figure 2: Angled view of the IGS-801M, showing the Ethernet ports and the removable terminal block for power input at the top.
3.3 Power Connection
The IGS-801M supports redundant DC power inputs. Connect your power source(s) to the terminal block connector located on the top of the switch. Ensure correct polarity (V+ to positive, V- to negative, and Ground to ground). The input voltage range is typically 12-48V DC, but refer to the product label for exact specifications.
- Connect the power wires to the appropriate terminals on the removable terminal block.
- Insert the terminal block into the power input slot on the switch.
- Once power is supplied, the P1 and/or P2 LEDs on the front panel should illuminate.
3.4 Network Connection
Connect your network devices (e.g., computers, servers, other switches) to the RJ45 Ethernet ports on the front panel using standard Cat5e/6 Ethernet cables. The switch supports auto MDI/MDI-X, so straight-through or crossover cables can be used interchangeably.
- Insert one end of the Ethernet cable into an available port on the IGS-801M.
- Connect the other end of the cable to your network device.
- The corresponding LNK/ACT LED for that port will illuminate when a valid link is established and blink to indicate activity.
4. Operation
4.1 LED Indicators
The front panel of the IGS-801M features several LED indicators to provide status information:
- P1 / P2 (Green): Indicates power status for power input 1 and 2. Lit when power is supplied.
- FAULT (Red): Indicates a system fault or power failure. Lit when an issue is detected.
- LNK/ACT (Green for each port):
- Solid Green: A valid network link is established.
- Blinking Green: Data activity is occurring on the port.
- 1000 (Green for each port): Indicates Gigabit (1000Mbps) connection speed.
- 100 (Green for each port): Indicates Fast Ethernet (100Mbps) connection speed.
4.2 Basic Network Configuration
The IGS-801M is a managed switch, supporting SNMP for advanced network management. For initial setup and basic configuration, you may need to connect to the switch via its web-based interface or console port (if available). Refer to the full user manual or the Quick Installation Guide for detailed instructions on accessing and configuring the switch's management features, including IP address assignment, VLANs, QoS, and security settings.
By default, the switch may obtain an IP address via DHCP or have a static default IP address. Consult the product documentation for the default IP and login credentials.
5. Maintenance
Regular maintenance helps ensure the longevity and optimal performance of your IGS-801M switch.
- Cleaning: Periodically clean the exterior of the switch with a soft, dry cloth. Do not use liquid or aerosol cleaners. Ensure ventilation openings are free from dust and debris.
- Firmware Updates: Check the Planet Technology website regularly for firmware updates. Keeping the firmware up-to-date can improve performance, add new features, and address security vulnerabilities.
- Environmental Monitoring: Ensure the operating environment remains within the specified temperature and humidity ranges to prevent damage.
- Cable Management: Ensure all network and power cables are securely connected and properly routed to prevent accidental disconnections or damage.
6. Troubleshooting
This section provides solutions to common issues you might encounter with the IGS-801M switch.
| Problem | Possible Cause | Solution |
|---|---|---|
| No Power (P1/P2 LEDs off) | No power supply, incorrect wiring, faulty power adapter. | Verify power source connection and voltage. Check terminal block wiring for correct polarity. Test with a known good power adapter. |
| No Link (LNK/ACT LED off) | Incorrect cable, faulty cable, device not powered on, port disabled. | Ensure Ethernet cable is properly connected at both ends. Try a different cable. Verify the connected device is powered on and functioning. Check switch configuration if ports are managed. |
| Slow Network Speed | Cable quality, network congestion, duplex mismatch. | Ensure Cat5e/6 cables are used for Gigabit speeds. Check for excessive network traffic. Verify duplex settings on connected devices match the switch. |
| FAULT LED is lit | Power input issue, internal hardware fault. | Check both power inputs (P1 and P2). If the issue persists, contact technical support. |
7. Technical Specifications
| Feature | Specification |
|---|---|
| Model | IGS-801M |
| Ports | 8 x 10/100/1000Base-TX RJ45 |
| Data Transfer Rate | 1000 Megabits Per Second |
| Operating Temperature | -40°C to 75°C (-40°F to 167°F) |
| Enclosure | IP30 Industrial Aluminum Case |
| Power Input | Redundant DC (Voltage range typically 12-48V DC) |
| Dimensions (L x W x H) | 1.1 x 9.7 x 6.5 inches (approx.) |
| Item Weight | 1.04 pounds (472 Grams) |
| Manufacturer | PLANET |
8. Warranty and Support
For detailed warranty information, please refer to the warranty card included with your product or visit the official Planet Technology website. Warranty terms and conditions may vary by region and product.
For technical support, product inquiries, or service requests, please contact Planet Technology's customer support. You can typically find contact information on their official website or in the product's full documentation.
Note: This manual provides general guidance. For comprehensive details and advanced configurations, please refer to the complete user manual available on the manufacturer's website.
