Timex Men's Expedition Base Shock 45mm Watch Blackout

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your Timex Men's Expedition Base Shock 45mm Watch Blackout. Please read this manual thoroughly to ensure proper use and to maximize the lifespan of your timepiece. This watch is designed for durability and functionality, featuring shock resistance and water resistance suitable for various activities.

Setup

1. Initial Time and Date Setting

1. Press and hold the SET button until the display flashes, indicating setup mode.
2. Press the MODE button to cycle through settings: seconds, hours, minutes, year, month, day.
3. Use the START/SPLIT and STOP/RESET buttons to adjust the flashing value up or down.
4. Once all settings are correct, press the SET button again to exit setup mode.

2. 12/24-Hour Format

• In time display mode, press the START/SPLIT button to toggle between 12-hour (AM/PM indicator) and 24-hour (military time) formats.

3. Setting Second Time Zone (T2)

1. From the main time display, press the MODE button repeatedly until 'T2' appears on the display.
2. Press and hold the SET button until the T2 time flashes.
3. Use the MODE button to select hours or minutes, and START/SPLIT / STOP/RESET to adjust.
4. Press SET to confirm and exit T2 setup.

Operating Functions

1. Chronograph (Stopwatch)

1. From the main time display, press the MODE button until 'CHRONO' or 'STW' appears.
2. Press START/SPLIT to begin timing.
3. Press START/SPLIT again to record a split time (lap time). The main timer continues running.
4. Press STOP/RESET to pause the chronograph.
5. Press STOP/RESET again to reset the chronograph to zero.

2. Countdown Timer

1. From the main time display, press the MODE button until 'TIMER' or 'CDT' appears.
2. Press and hold the SET button to enter timer setting mode.
3. Use MODE to select hours, minutes, or seconds, and START/SPLIT / STOP/RESET to adjust the values.
4. Press SET to confirm the countdown time.
5. Press START/SPLIT to begin the countdown. An alarm will sound when the timer reaches zero.
6. Press STOP/RESET to pause or reset the timer.

3. Alarms

1. From the main time display, press the MODE button until 'ALARM' or 'ALM' appears.
2. Press and hold the SET button to enter alarm setting mode.
3. Use MODE to select hours or minutes, and START/SPLIT / STOP/RESET to adjust the alarm time.
4. Press SET to confirm the alarm time.
5. Press START/SPLIT to toggle the alarm ON/OFF. An alarm icon will appear when activated.
6. When the alarm sounds, press any button to silence it.

4. Indiglo Night-Light

• Press the INDIGLO button (located below the display) to activate the night-light for easy viewing in low-light conditions.

Maintenance

1. Cleaning

• Regularly clean your watch with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials.
• For resin straps, mild soap and water can be used, followed by thorough rinsing and drying.

2. Battery Replacement

• The watch requires 1 Lithium Metal battery (included).
• Battery replacement should ideally be performed by a qualified watch technician to ensure water resistance is maintained. Improper replacement can compromise the watch's seals.

3. Water Resistance

• This watch is water-resistant to 100 meters (330 feet). This makes it suitable for snorkeling and swimming, but not for diving.
• Do not operate buttons while the watch is submerged in water to prevent water ingress.
• Avoid exposing the watch to extreme temperature changes, which can affect the water-resistant seals.

Troubleshooting

Common Issues and Solutions:

• Display is blank or dim: The battery may be low or depleted. Replace the battery (CR2025) by a professional.
• Buttons are unresponsive: Ensure the watch is not in a locked mode (if applicable, refer to specific model features). Try a soft reset by holding all four side buttons simultaneously for a few seconds, then re-setting the time. If issues persist, battery replacement may be necessary.
• Time is inaccurate: Re-set the time and date as per the 'Setup' section. If the inaccuracy continues, the battery may be weak, or the watch module may require servicing.
• Water inside the watch: Immediately take the watch to a qualified service center. Do not attempt to open it yourself, as this can cause further damage.

Specifications

Warranty and Support

For detailed warranty information and customer support, please refer to the official Timex website or contact Timex customer service directly. Keep your proof of purchase for any warranty claims.

Manufacturer: Timex