Product Overview
The Westclox Travel Alarm Clock, Model 72001, is a compact and feature-rich device designed for both travel and home use. It boasts a large, easy-to-read LCD that displays the current time, day, date, alarm time, and temperature. For low-light conditions, an ultra-bright blue backlight can be activated on demand. The clock includes a super-loud alarm with adjustable volume and a dedicated nap alarm function for convenient short rests.
Key Features
- Large LCD Display
- Super Loud Alarm with Hi/Lo Volume Control
- Separate Nap Alarm Function
- Bright Blue Backlight on Demand
- Displays Day, Date, Alarm Time, and Temperature
Package Contents
- Westclox Travel Alarm Clock (Model 72001)
- User Manual (This document)
Note: Two AAA batteries are required for operation and are not included.
Getting Started
Battery Installation
The Westclox Travel Alarm Clock requires two AAA batteries for power. Please ensure you have new batteries available before proceeding.
- Locate the battery compartment cover on the back of the clock.
- Slide the cover downwards to open the compartment.
- Insert two AAA batteries, carefully observing the correct polarity (+ and -) as indicated inside the compartment. Incorrect installation will prevent the clock from functioning.
- Replace the battery compartment cover by sliding it upwards until it securely clicks into place.

Controls and Display
To effectively use your Westclox Travel Alarm Clock, it is important to understand the function of each button and switch, as well as the information presented on the display.



Front Panel Buttons
- C/F: Toggles the temperature display between Celsius and Fahrenheit.
- HOUR/MONTH: Used to adjust the hour or month during time/date setting.
- MIN/DATE: Used to adjust the minute or date during time/date setting.
- 12/24 YEAR: Toggles between 12-hour and 24-hour time format; also used to set the year.
- NAP: Activates and sets the duration for the nap timer.
Side Switches
- ALARM HI/LO/OFF: Controls the alarm volume (High, Low) or turns the alarm off completely.
- TIME/DATE/RUN: Selects the mode for setting time, date, or normal operation.
Top Button
- SNOOZE LIGHT: Activates the blue backlight for a few seconds; also functions as the snooze button when the alarm sounds.
Operating Instructions
Setting the Time and Date
- Slide the TIME/DATE/RUN switch on the side of the clock to the TIME position.
- Press the HOUR/MONTH button repeatedly to set the current hour. Observe the AM/PM indicator for 12-hour format.
- Press the MIN/DATE button repeatedly to set the current minute.
- Press the 12/24 YEAR button to toggle between 12-hour and 24-hour time formats.
- To set the date, while in TIME setting mode, press HOUR/MONTH to set the month, then MIN/DATE to set the day, and 12/24 YEAR to set the year.
- Once the time and date are correctly set, slide the TIME/DATE/RUN switch back to the RUN position for normal operation.
Setting the Alarm
- Slide the TIME/DATE/RUN switch on the side of the clock to the ALARM position.
- Press the HOUR/MONTH button repeatedly to set the desired alarm hour. Note the AM/PM indicator.
- Press the MIN/DATE button repeatedly to set the desired alarm minute.
- Slide the TIME/DATE/RUN switch back to the RUN position.
- To activate the alarm, slide the ALARM HI/LO/OFF switch to either HI (high volume) or LO (low volume). An alarm icon will appear on the display, indicating the alarm is armed.
Using the Nap Timer
The nap timer provides a convenient way to set a short, independent alarm without altering your main alarm setting.
- Press the NAP button on the front panel. The nap timer will activate, typically starting from 10 minutes.
- Continue pressing the NAP button to cycle through desired nap durations (e.g., 10, 20, 30, 40, 50, 60 minutes).
- The nap timer will count down and sound an alarm when it reaches zero.
- To cancel the nap timer before it sounds, press the NAP button repeatedly until the display shows "00" or the nap icon disappears.
Using the Backlight
To illuminate the display for easy viewing in dark environments, press the large SNOOZE LIGHT button located on top of the clock. The blue backlight will activate for a few seconds and then automatically turn off.
Snooze Function
When the alarm sounds, press the SNOOZE LIGHT button on top of the clock to temporarily silence the alarm. The alarm will sound again after approximately 9 minutes.
Turning Off the Alarm
To turn off the alarm completely and prevent it from sounding again, slide the ALARM HI/LO/OFF switch to the OFF position. The alarm icon will disappear from the display.
Maintenance
Cleaning
To clean your Westclox Travel Alarm Clock, use a soft, dry cloth. Do not use abrasive cleaners, chemical solvents, or strong detergents, as these may damage the clock's finish, display, or internal components.
Battery Replacement
When the display dims, the backlight becomes weak, or the alarm sound weakens, it is an indication that the batteries need to be replaced. Follow the battery installation steps outlined in the "Getting Started" section. Always replace both batteries at the same time with new AAA batteries to ensure optimal performance.
Storage
If the clock will not be used for an extended period, it is recommended to remove the batteries to prevent potential leakage and damage to the unit. Store the clock in a cool, dry place, away from direct sunlight and extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Clock display is blank or dim. | Batteries are dead or incorrectly installed. | Check battery polarity. Replace with fresh AAA batteries. |
| Alarm does not sound. | Alarm is not set, alarm volume is off, or nap timer is active. | Ensure alarm time is set and alarm icon is visible. Slide ALARM HI/LO/OFF switch to HI or LO. Check if nap timer is active and cancel if necessary. |
| Alarm is too quiet. | Alarm volume is set to low. | Slide the ALARM HI/LO/OFF switch to HI. |
| Time is incorrect. | Time was not set correctly or batteries were removed. | Reset the time following the "Setting the Time and Date" instructions. |
| Backlight does not work. | Batteries are low or dead. | Replace batteries. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | 72001 |
| Brand | Westclox |
| Display Type | Digital LCD |
| Power Source | Battery Powered |
| Batteries Required | 2 x AAA (Not Included) |
| Product Dimensions (L x W x H) | 1.96 x 1.5 x 7.8 inches |
| Item Weight | 3.87 ounces |
| Features | Large LCD Display, Super Loud Alarm, Separate Nap Alarm, Bright Blue Backlight on Demand, Day/Date, Alarm Time, Temperature Display (C/F) |
Warranty and Support
For warranty information or technical support regarding your Westclox Travel Alarm Clock Model 72001, please refer to the official Westclox website or contact their customer service directly. While specific warranty details are not provided in this manual, Westclox typically offers a limited warranty on their products covering manufacturing defects. Please retain your purchase receipt as proof of purchase.
For further assistance, you may visit the Westclox Store on Amazon or search for Westclox customer support online.