Introduction
This instruction manual provides essential information for the proper installation, use, and maintenance of your Empire 3 Piece Standard Fireplace Frame, Model DVF36BL. Please read this manual thoroughly before beginning installation or use to ensure safe and efficient operation. Retain this manual for future reference.
Important Safety Information
- Always handle components with care to avoid damage or injury.
- Ensure all parts are present and undamaged before beginning installation.
- This frame is designed for specific Empire fireplace models: 36-Inch Tahoe Direct-Vent, 36-Inch Keystone Deluxe, and 36-Inch Vail Vent-Free Fireplaces. Verify compatibility before installation.
- Keep small parts away from children.
- If you are unsure about any part of the installation process, consult a qualified professional.
Package Contents
Your package should contain the following items:
- 3-Piece Outer Frame (Matte Black)
- Installation Hardware (if applicable, check packaging)
If any components are missing or damaged, please contact Empire customer support immediately.
Setup and Installation
This 3-piece frame is designed to provide a finished transition between your fireplace appliance and the adjoining wall or surface. Follow these general steps for installation:
- Unpack Components: Carefully remove all frame pieces from the packaging. Inspect for any shipping damage.
- Prepare Fireplace Opening: Ensure the fireplace unit is properly installed and secured according to its own instruction manual. The surrounding surface should be clean and free of debris.
- Position Frame Pieces: The frame consists of three sections (top, left, and right). Carefully align each piece around the fireplace opening. The matte black finish should face outwards.
- Secure Frame: Depending on your specific fireplace model and installation, the frame pieces will either snap into place, be held by clips, or require screws. Refer to your fireplace unit's manual for specific frame attachment points and methods. Ensure the frame is flush with the fireplace and the adjoining surface.
- Verify Fit: Once all pieces are in place, check that the frame is securely attached and provides a seamless transition. There should be no gaps or loose sections.
For detailed instructions on attaching the frame to your specific Empire fireplace model, please consult the installation manual provided with your fireplace unit.
Usage Guidelines
The Empire 3 Piece Standard Fireplace Frame is a decorative and functional component designed to finish the appearance of your fireplace installation. Once properly installed, no further "operation" is required from the frame itself. Ensure the frame remains securely attached and is not subjected to excessive force or impact.
Care and Maintenance
- Cleaning: To clean the matte black finish, use a soft, damp cloth. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- Inspection: Periodically inspect the frame for any signs of loosening or damage. If any issues are found, address them promptly to maintain safety and appearance.
- Storage: If the frame needs to be removed and stored, ensure it is kept in a dry, protected environment to prevent scratches or damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Frame does not fit properly. | Incorrect fireplace model; improper alignment during installation. | Verify your fireplace model is compatible (36-Inch Tahoe Direct-Vent, 36-Inch Keystone Deluxe, or 36-Inch Vail Vent-Free). Re-align frame pieces carefully. |
| Frame appears loose after installation. | Improper securing of frame pieces; missing clips/screws. | Ensure all attachment points are engaged. Refer to your fireplace unit's manual for specific securing methods. |
| Scratches or damage to the finish. | Abrasive cleaning materials; impact during handling or use. | Use only soft cloths for cleaning. Handle with care. Minor scratches may be touched up with appropriate matte black paint (test in an inconspicuous area first). |
Specifications
| Model Number: | DVF36BL |
| Color: | Matte Black |
| Style: | Traditional |
| Finish: | Matte |
| Installation Method: | Designed for integration with specific Empire fireplace units |
| Compatibility: | 36-Inch Tahoe Direct-Vent, 36-Inch Keystone Deluxe, and 36-Inch Vail Vent-Free Fireplaces |
| Usage: | Indoor |
Warranty and Customer Support
For information regarding warranty coverage, please refer to the documentation provided with your original fireplace unit or contact Empire customer support directly. For technical assistance or to order replacement parts, please visit the official Empire website or contact their customer service department.
Website: www.empirecomfort.com (Example link, actual link may vary)
