Vivitar DVR810HD Digital Video Camera User Manual

1. Introduction

This user manual provides detailed instructions for the operation and maintenance of your Vivitar DVR810HD Digital Video Camera. Please read this manual thoroughly before using the device to ensure proper function and to maximize your user experience. Keep this manual for future reference.

2. Product Overview

2.1 Key Features

• 4x Digital Zoom: Allows for closer views of subjects.
• SD Card Support: Expandable memory for storing videos and photos.
• PicBridge Ready: Direct printing capability to compatible printers.
• Voice Recorder Feature: Capture audio recordings.
• 2.7-inch LCD Screen: For framing shots and reviewing content.

2.2 Camera Components

Familiarize yourself with the various parts of your Vivitar DVR810HD camera.

Figure 1: Front-side view of the Vivitar DVR810HD Digital Video Camera in grape color, showing the lens and top controls.

Figure 2: Rear view of the Vivitar DVR810HD Digital Video Camera in grape color with the LCD screen open, revealing the control buttons and battery compartment.

Refer to the diagrams above for the location of the following components:

• Lens: Captures video and still images.
• LCD Screen: Displays live view, menus, and playback.
• Power Button: Turns the camera on or off.
• Record Button: Starts and stops video recording.
• Shutter Button: Captures still images.
• Zoom Controls: Adjusts digital zoom level.
• Navigation Buttons: For menu navigation and settings adjustment.
• Battery Compartment: Holds AAA batteries.
• SD Card Slot: For inserting a memory card.
• USB Port: For connecting to a computer.

3. Setup

3.1 Battery Installation

The Vivitar DVR810HD requires four (4) AAA batteries for operation.

1. Locate the battery compartment door, typically on the underside or rear of the camera.
2. Slide or lift the door to open the compartment.
3. Insert four fresh AAA batteries, ensuring correct polarity (+ and -) as indicated inside the compartment.
4. Close the battery compartment door securely.

Note: Always use fresh, high-quality alkaline or rechargeable AAA batteries for optimal performance. Remove batteries if the camera will not be used for an extended period.

3.2 Memory Card Installation

An SD (Secure Digital) memory card is required to store videos and photos.

1. Locate the SD card slot, usually on the side or near the battery compartment.
2. Insert the SD card with the metal contacts facing the correct direction (refer to the diagram near the slot if available) until it clicks into place.
3. To remove the SD card, gently push it in until it clicks, then release, and it will eject slightly.

Note: The camera has minimal internal memory. An SD card is essential for recording. Format a new SD card in the camera's settings before first use.

3.3 Initial Power On

1. Press and hold the Power button until the LCD screen illuminates.
2. The camera may prompt you to set the date and time. Use the navigation buttons to adjust and confirm.

4. Operating Instructions

4.1 Recording Video

1. Turn on the camera.
2. Ensure the camera is in video recording mode (indicated by an icon on the LCD screen). If not, use the Mode button to switch.
3. Frame your shot using the LCD screen.
4. Press the Record button once to start recording. A red indicator or timer will appear on the screen.
5. Press the Record button again to stop recording. The video will be saved to the SD card.

4.2 Taking Photos

1. Turn on the camera.
2. Switch to still photo mode using the Mode button.
3. Frame your shot.
4. Press the Shutter button to capture a photo. The image will be saved to the SD card.

4.3 Playback

1. Turn on the camera.
2. Switch to playback mode using the Mode button.
3. Use the navigation buttons to scroll through your recorded videos and photos.
4. Press the OK or Play button to view a selected item.

4.4 Using Digital Zoom

While in recording or photo mode, use the Zoom In and Zoom Out buttons (often labeled 'W' for Wide and 'T' for Telephoto) to adjust the 4x digital zoom.

4.5 Voice Recorder Function

To use the voice recorder:

1. Switch to voice recorder mode (refer to your camera's on-screen icons).
2. Press the Record button to start recording audio.
3. Press the Record button again to stop.

5. Connecting to a Computer

You can transfer files from your Vivitar DVR810HD to a computer using a USB cable or by directly inserting the SD card into a card reader.

5.1 USB Connection

1. Ensure the camera is powered off.
2. Connect one end of the USB cable to the camera's USB port and the other end to an available USB port on your computer.
3. Turn on the camera. It should appear as a removable disk drive on your computer.
4. Open the drive to access and transfer your video and photo files.

5.2 PicBridge Direct Printing

If you have a PicBridge-compatible printer, you can connect the camera directly to the printer via USB to print photos without a computer. Refer to your printer's manual for specific instructions on PicBridge printing.

6. Maintenance

6.1 Cleaning

• Use a soft, dry cloth to clean the camera body.
• For the lens and LCD screen, use a specialized lens cleaning cloth and solution. Avoid abrasive materials.
• Do not use chemical cleaners or solvents.

6.2 Storage

• Store the camera in a cool, dry place away from direct sunlight and extreme temperatures.
• Remove batteries if the camera will not be used for an extended period to prevent leakage.

7. Troubleshooting

If you encounter issues with your Vivitar DVR810HD, refer to the following common solutions:

• Camera does not power on: Ensure batteries are correctly inserted and fully charged. Try new batteries.
• Cannot record: Check if an SD card is inserted and has sufficient free space. Format the SD card if necessary (this will erase all data).
• Poor image/video quality: Ensure the lens is clean. Check lighting conditions; the camera performs best in well-lit environments.
• Camera freezes: Remove and reinsert the batteries to reset the device.
• Files not transferring to computer: Ensure the USB cable is securely connected and the camera is powered on in the correct mode for data transfer. Try a different USB port or cable.

8. Specifications

9. Warranty and Support

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Vivitar website. Keep your proof of purchase for any warranty claims.