Vivitar DVR 4K (v4) Digital Camcorder Easy Guide

Friendly Tips

1. The camcorder supports an SD memory card up to 256GB. A branded class-10 SD/SDHC card is recommended and must be formatted in the camcorder before first-time use.
2. This camcorder includes one lithium battery. Install the battery correctly before first use; otherwise, the camera will not charge or boot.
3. For assistance with installing the lens hood and external microphone, refer to this video: Vivitar Camcorder Lens Hood & Mic Installation Guide

About the camera

System requirement

Users can transfer videos and photos to computers with the following configurations: Intel Pentium 2.0GHz or higher, Microsoft Windows XP or higher operating system, 2GB RAM, 40GB or more available disk memory, Standard USB interface, 1GB GPU or higher, and 1920x1080 pixel or higher resolution.

Parts and controls

Front side view: Features a Hot shoe (for accessories), IR light, and Lens (F=2.6 f=7.0mm).

Back side view: Includes a Charge/Busy indicator, Rec/Stop button, External MIC Jack, HDMI output interface, and Type-C USB interface.

Top side view: Shows a Hot shoe and Photo shutter.

Bottom side view: Features a Zoom in/out control, Tripod hole, and Battery/memory card slot cover.

Left side view: Contains a Built-in speaker, Mode button, Power / OK / IR light button, UP / Wi-Fi button, Down button, Built-in MIC, and Menu button.

Buttons/Indicators and Functions

Packaging contents

1. 4K Digital camcorder
2. Rechargeable lithium battery x2
3. DV bag
4. USB cable
5. HDMI cable
6. Remote controller
7. Lens cover
8. Installation manual
9. Adapter
10. Tripod
11. 64GB memory card

Remote Controller

Users can control the camcorder using the remote controller. Except for powering on, the remote control can accomplish all other instructions.

Remote Control Buttons:

1. Night vision button
2. Power button
3. Photo button
4. Video button
5. Playback button
6. Zoom in button
7. Zoom out button
8. Left button
9. Up button
10. Right button
11. Down button
12. Ok button
13. Menu button
14. Mode button

Charging the battery

1. Power off the camcorder, open the battery cover, insert the battery in the correct direction (as shown in diagrams with the battery sliding into the compartment), then close the battery cover.
2. Use the supplied USB cable to charge the camcorder via a 5V/1A~5V/2A adapter or by connecting directly to a PC.

Power on/off the camcorder

Opening the touch screen will automatically power on the camcorder.

Alternatively, power on the camcorder by pressing the Power/OK/IR Night button. To power off, close the touch screen or hold and press the Power/OK/IR Night button for 3 seconds.

Set the Camcorder

You can customize the camcorder settings. After powering on, tap the Menu icon on the screen or press the Menu button to open the menu.

Available System Settings

Insert and format the memory card

A class 10 or higher speed memory card is recommended for normal use.

1. Open the battery cover and insert the memory card until you hear a "click" sound. Ensure the card is inserted with the noted corner in the direction as illustrated (typically a cut corner on the card aligns with a similar shape in the slot).
2. To remove the memory card, open the cover and push the memory card; it will pop up automatically.

Format the memory card

It is recommended to format the memory card before first use. To format, tap the Menu icon on the screen or press the Menu button to open the menu. Then tap the System settings icon to open system settings. Press the Up/Down button or slide down the screen until "Format", then tap Format or press the Power/OK/Night vision button to get the submenu. Select "Format" to format the memory card.

Using the camcorder

After powering on, video capture mode is the default. Press the Mode button or tap the Mode icon on the screen to choose the desired mode.

Camcorder Modes:

The camcorder supports related settings in different modes. After choosing your desired mode, tap the "Menu" icon on the screen or press the Menu button to open the menu and select the desired settings.

Press the Photo Shutter button to take a photo; the photo will be saved to the memory card automatically. Press the Record/Stop button to start a video recording; press again to stop. You can also press the Photo Shutter to pause/continue recording.

• Zoom in/out button: Controls digital zoom.
• Photo shutter button: Takes photos or pauses/continues video recording.
• Busy indicator: The light flashes while recording.
• Record/Stop recording: Press to start recording, press again to stop.

IR Night vision

Short press the Power/IR light/OK button to turn on IR night vision; press again to turn off the IR lights.

Mic interface

The camcorder supports an external microphone with a 3.5mm connector.

Playback

Open the touch screen, tap the Mode icon, or press the Mode button to open the mode options. Scroll down the icons or press the Down button to the end. Then tap "Playback" or press the Power/OK/Light button to enter playback mode. Press the Up / Down button to scroll through images saved in the memory card.

Playback Screen Elements:

• Current / Total number of images: Displays the current image number out of the total.
• Photo playback: Shows the current picture with its resolution (e.g., 8640x6480). Tap to exit playback or press MODE button.
• Video playback: Shows the current video with its resolution (e.g., 4K). Tap to play the current video. Tap to delete the current image or press MENU button to delete.

Playback in HDTV

The HD interface of this camcorder is only for connecting to a high-definition TV, not a computer.

Plug the public port of the HD cable into the HD interface of the camcorder, and connect the other end to the HD input interface of the HDTV. The HD cable is suitable for Mini HDMI to HDMI Cable.

Connect to computer

Connecting the camcorder to a computer allows image transfer and use as a PC camera.

1. Connect the Type-C USB port of the camcorder and the USB port of the computer with the supplied USB cable.

The camcorder will power on automatically, and the screen will show available options:

• USB Connected
• Charging Mode
• Mass Storage Mode
• PC Camera

Tap the desired option or press the UP/DOWN button, then press the Power/OK/Light button to confirm the settings.

Charging Mode

Selecting this mode allows the camcorder to record normally. Powering off the camcorder will result in faster full charging.

Mass Storage Mode

Selecting "Mass Storage Mode" makes the computer display the camcorder's memory card as a disk, allowing file transfer to and from the memory card.

PC Camera

Selecting "PC Camera" mode allows the camera to be used as a webcam for live streaming, etc.

Connect to the iDV-PRO app

The built-in Wi-Fi allows monitoring the camcorder (taking photos/videos) and easily downloading photos/videos to your smartphone.

Download the app and connect the camcorder's Wi-Fi network

Search for "iDV-PRO" on Google Play (Android) or Apple App Store (iOS) to download the app.

After powering on the camcorder, hold and press the UP/Wi-Fi button to open Wi-Fi. The Wi-Fi ID and password will display on the camcorder screen (e.g., Wi-Fi ID: 4K-WIFI, Wi-Fi password: 12345678).

On your smartphone or tablet, turn on Wi-Fi, tap Settings → WLAN → 4K_WIFIxxxx, then enter the password shown on the camcorder's screen.

System requirement (of smartphone):

• Android 6.0 or higher is required
• iOS 8.0 or higher is required

iDV-PRO App Functionality:

• Camcorder settings: Access various settings.
• Current resolution: Displays the current video resolution (e.g., 4K60FPS).
• Change different modes of the camcorder: Allows switching between Video, Slowly, Loop, Lapse modes.
• Change resolutions of the current mode: Adjusts video resolution within the selected mode.
• Current Wi-Fi ID of camcorder: Displays the camcorder's Wi-Fi network name (e.g., 4K_WIFI2481).
• Tap to see the live view and monitor the camcorder by app: Provides a live feed from the camcorder.
• Download/Delete the images: Manage media files.
• Launch the images which downloaded to your smartphone from the app: Access downloaded files.
• Launch the images which saved into the memory card of camcorder: Access files on the camcorder's memory card.

Troubleshooting

If you encounter problems with the camcorder, refer to this section.

1. The camcorder cannot be turned on after installing the battery

1. The battery power is insufficient; replace or charge the battery.
2. The battery is installed in reverse; confirm correct installation.
3. The battery insulating paper is not removed.

2. The battery is not charging

1. If the red light of the charging indicator flashes, the battery is not in place or the contact is poor. Re-install the battery until the indicator light is on (it goes out when fully charged).
2. If the charging indicator light is off and the charger is not plugged in properly, check the charger connection.
3. Ambient temperature lower than 10°C may lead to slow charging or charging failure.

3. The remote control does not work

1. When using the remote control, pull out the bottom insulating paper. If it still doesn't work, pull out and reinsert the remote control battery.
2. The remote control cannot remotely turn on the camcorder, only turn it off.

4. Camera crashes

1. Quickly pressing any button may cause the camcorder to freeze. After a crash, unplug the battery and reboot. When recording or taking pictures, do not quickly press the camera button. The camcorder will display a waiting icon under normal circumstances.

5. The memory card cannot be recognized:

1. Check if the memory card complies with SD card (class10) and its maximum capacity (not more than 256GB).
2. Check if the memory card is inserted backwards.
3. If the memory card is used on the camcorder for the first time, it is recommended to format it first.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

VIVITAR WARRANTY

This warranty covers the original consumer purchaser only and is not transferable.

This warranty covers products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year.

What Is Not Covered by Warranty:

Damages or malfunctions not resulting from defects in material or workmanship and damages or malfunctions from other than normal use, including but not limited to, repair by unauthorized parties, tampering, modification or accident.

To Obtain Warranty Service and Troubleshooting Information:

Call 1-800-592-9541 or visit the website at www.vivitar.com.

To receive Warranty service along with the name and address of an authorized product service center, the original consumer purchaser must contact Vivitar for problem determination and service procedures.

Proof of purchase in the form of a bill of sale or receipted invoice, evidencing that the Product is within the applicable Warranty period(s), MUST be presented to obtain the requested service.

It is the consumer's responsibility to properly package and send any defective products along with a dated copy of proof of purchase, a written explanation of the problem, and a valid return address to the authorized service center at their expense. Do not include any other items or accessories with the defective product. Any products received by the authorized service center that are not covered by warranty will be returned unrepaired.

NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE EXPRESSLY DESCRIBED ABOVE SHALL APPLY. DISTRIBUTOR FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY PERIOD STATED ABOVE.

NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON DISTRIBUTOR.

REPAIR, REPLACEMENT, OR REFUND OF THE ORIGINAL PURCHASE PRICE - AT DISTRIBUTOR'S SOLE DISCRETION - ARE THE EXCLUSIVE REMEDIES OF THE CONSUMER. IN NO EVENT WILL DISTRIBUTOR, ITS MANUFACTURERS, OR SAKAR INT. BE LIABLE FOR ANY INCIDENTAL, DIRECT, INDIRECT, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES (SUCH AS, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA OR RECORDS) CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE PRODUCT. EXCEPT AS STATED HEREIN, NO OTHER WARRANTIES SHALL APPLY.

NOTWITHSTANDING THE FOREGOING, CONSUMER'S RECOVERY AGAINST DISTRIBUTOR SHALL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT SOLD BY DISTRIBUTOR. THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL CONSUMER WHO PURCHASED THE PRODUCT AND IS NOT TRANSFERABLE.

Some countries, states or provinces do not allow the exclusion or limitation of incidental or consequential damages or allow limitations on warranties, so limitation or exclusions may not apply to you. This warranty gives you specific legal rights, and you may have other rights that vary from state to state or province to province. Contact your authorized retailer to determine if another warranty applies. This product is manufactured, distributed and sold by SAKAR International, Inc. All other trademarks are the property of the respective owner, who has not sponsored, endorsed or approved this product.

Technical Support

For technical support issues, visit the Vivitar website at www.vivitar.com. Manuals, software, and FAQs can be found on the website. For further assistance, email support@vivitar.com to reach a technical support team member. For phone support in the US, call 1-800-592-9541.

SAKAR / VIVITAR INTERNATIONAL

Symbol for crossed-out wheeled bin (Waste Electrical and Electronic Equipment Directive) and Mobius loop (recycling symbol).