Introduction
This manual provides essential information for the proper use and handling of your SOLO X16N-J8002 16 oz Symphony Trophy Plus Hot/Cold Cups. These cups are designed for serving both hot and cold beverages, offering convenience and insulation.
Image: A single SOLO X16N-J8002 16 oz Symphony Trophy Plus Hot/Cold Cup, featuring the Symphony design. This cup is suitable for a variety of beverages.
Setup and Preparation
The SOLO X16N-J8002 cups are designed for immediate use upon unpacking. No assembly is required.
- Unpacking: Carefully remove the cups from their packaging. Inspect for any damage during transit.
- Storage: Store cups in a clean, dry environment away from direct sunlight and extreme temperatures to maintain their integrity.
- Lids (Optional): If using coordinating lids (sold separately), ensure they are compatible with the 16 oz Trophy Plus cup size for a secure fit.
Operating Instructions
These cups are versatile for both hot and cold beverages.
For Hot Beverages:
- Pour hot liquids directly into the cup. The insulated foam construction helps maintain beverage temperature and keeps the exterior comfortable to touch.
- Ensure the beverage temperature does not exceed safe handling limits for foam products.
- If using a lid, press it firmly onto the rolled rim of the cup to create a seal.
For Cold Beverages:
- Fill the cup with cold liquids or ice. The insulation helps reduce condensation on the exterior.
- If using a lid, press it firmly onto the rolled rim of the cup to create a seal.
Image: A person writing at a table with a clear cup containing a cold beverage, demonstrating typical use in an office or study setting.
Maintenance and Disposal
These cups are designed for single-use applications.
- Cleaning: Do not attempt to wash or reuse these cups. They are intended for one-time use only.
- Disposal: Dispose of used cups in accordance with local waste management regulations.
Troubleshooting
While these cups are simple in design, here are common inquiries:
- Lid does not fit securely: Ensure you are using a lid specifically designed for 16 oz Trophy Plus cups. Lids are sold separately and compatibility is crucial for a proper seal.
- Cup feels too hot/cold: The insulated foam is designed to maintain beverage temperature and provide a comfortable grip. Extreme temperatures of contents may still affect the cup's exterior. Always handle with care.
- Leaking: Check for any visible damage to the cup or rim. Ensure the lid (if used) is properly seated. These cups feature a rolled rim for structural rigidity and resistance to leaking when fitted with a compatible lid.
Specifications
| Model Number | X16N-J8002 |
| Brand | SOLO |
| Capacity | 16 oz |
| Design/Theme | Symphony |
| Material | Insulated Foam |
| Special Feature | Non-Slip Grip, Rolled Rim |
| Cup Dimensions | Approximately 3.4" diameter x 5.1" height |
| Case Dimensions | 17.6 x 10.8 x 31.3 inches |
| Case Weight | 5.7 Pounds |
| Intended Use | Hot and Cold Beverages, Single-Use |
| Contents | Cup (Lids sold separately) |
Support and Warranty
For product inquiries or support, please contact SOLO customer service. As a disposable product, these cups typically do not come with a traditional warranty. Any issues related to manufacturing defects should be reported to the retailer or manufacturer directly upon receipt.
For more information about SOLO products, you may visit the official SOLO brand store: SOLO Store on Amazon.
