1. Introduction
This manual provides detailed instructions for the proper installation, operation, and maintenance of the Blue Ox BXW0750-S Swaypro Weight Distributing Hitch. This system is designed to distribute weight evenly across the axles of your tow vehicle and trailer, enhancing stability and control, particularly for trailers with a tongue weight of up to 750 lbs. Adherence to these instructions is crucial for safe and effective use of the product.
2. Safety Information
Always prioritize safety when installing and operating towing equipment. Failure to follow safety guidelines can result in serious injury or property damage.
- Ensure all components are securely fastened and torqued to manufacturer specifications.
- Never exceed the maximum rated tongue weight of 750 lbs for this hitch. Always use a tongue scale to verify your trailer's tongue weight when fully loaded.
- Regularly inspect all hitch components for wear, damage, or corrosion before each towing trip. Do not use if any damage is observed.
- Ensure proper vehicle and trailer tire pressure as recommended by their respective manufacturers.
- Be aware of your combined vehicle and trailer length and weight, especially when turning or braking.
- If you are unsure about any installation step, consult a qualified professional or contact Blue Ox customer support.
3. Components Overview
The Blue Ox BXW0750-S Swaypro hitch system includes the following primary components:
- Standard Coupler Hitch Head: The main assembly that connects to the trailer coupler and houses the spring bar attachment points.
- Standard Shank (9 Hole/9" Receiver Stinger): Inserts into the vehicle's receiver hitch and connects to the hitch head.
- Clamp-on Brackets: Attach to the trailer frame to provide pivot points for the spring bars.
- Spring Bars (750 lb rated): Two long bars that extend from the hitch head to the clamp-on brackets, providing weight distribution and sway control.
- Wrench: A heavy-duty wrench is included for installation and adjustments.
Image 1: Overview of the Blue Ox BXW0750-S Swaypro Weight Distributing Hitch, showing the hitch head, shank, spring bars, and clamp-on brackets.
4. Setup & Installation
Proper installation is critical for the performance and safety of your Swaypro hitch. It is recommended to have this system installed by a qualified professional or to carefully follow all instructions provided by Blue Ox.
4.1 Pre-Installation Checks
- Tongue Weight Verification: Before installation, use a tongue scale to determine your trailer's tongue weight when fully loaded. Ensure it is within the 750 lb capacity of this hitch.
- Trailer Coupler Compatibility: This Swaypro model is designed for trailers where the coupler is welded to the top of the frame. Verify that your trailer does not have cross-members on the tongue or other equipment blocking the installation area for the clamp-on brackets.
- Receiver Compatibility: Ensure your tow vehicle's receiver hitch is compatible with the 9-hole/9-inch stinger provided.
4.2 Installation Steps (Summary)
While a detailed step-by-step guide is provided in the full Blue Ox manual, the general installation process involves:
- Mounting the standard shank into your vehicle's receiver hitch.
- Attaching the coupler hitch head to the shank, adjusting for proper height and angle.
- Securing the clamp-on brackets to the trailer frame at the specified distance from the coupler.
- Connecting the spring bars from the hitch head to the clamp-on brackets, ensuring they are properly tensioned to distribute weight.
- Performing final adjustments and torqueing all bolts to specifications.
Note: Some units may come with the ball pre-installed on the hitch head, while others may require separate installation. Refer to your specific product packaging and included instructions.
5. Operating Instructions
Once installed, operating the Swaypro hitch involves proper connection and disconnection procedures.
5.1 Connecting the Trailer
- Back your tow vehicle to align the hitch ball with the trailer coupler.
- Lower the trailer coupler onto the hitch ball and secure the coupler latch.
- Attach the safety chains and break-away cable.
- Connect the spring bars to the clamp-on brackets. This typically involves rotating the bars into position using the provided wrench, which tensions the system and distributes the weight.
- Verify that the vehicle and trailer are level and that weight is properly distributed. Adjust spring bar tension if necessary.
5.2 Disconnecting the Trailer
- Park on a level surface and engage the parking brake on both the tow vehicle and trailer.
- Relieve tension on the spring bars by following the reverse procedure for connection, typically by rotating them out of the clamp-on brackets.
- Disconnect safety chains and break-away cable.
- Raise the trailer coupler off the hitch ball.
- Move the tow vehicle away from the trailer.
6. Maintenance
Regular maintenance ensures the longevity and safe operation of your Blue Ox Swaypro hitch.
- Lubrication: Periodically lubricate the hitch ball and any pivot points or grease fittings on the hitch head and spring bars. Use a high-quality grease suitable for towing applications.
- Inspection: Before each trip, visually inspect all components for signs of wear, cracks, bends, or corrosion. Pay close attention to the spring bars, hitch head, shank, and all bolts.
- Cleaning: Keep the hitch clean from dirt, road grime, and salt, especially after use in adverse conditions. The powder-coated steel construction offers good protection, but regular cleaning will extend its life.
- Bolt Torque: Periodically check the torque on all bolts according to the specifications in the full Blue Ox manual. Loose bolts can compromise safety and performance.
7. Troubleshooting
This section addresses common issues you might encounter with your Swaypro hitch.
| Problem | Possible Cause | Solution |
|---|---|---|
| Excessive Sway (Micro Sway or Strong Pulls) |
|
|
| Difficulty Connecting/Disconnecting Spring Bars |
|
|
| Missing Parts Upon Delivery |
|
|
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | BXW0750-S |
| Brand | Blue Ox |
| Tongue Weight Capacity | 750 lbs |
| Pull Force | 2000 lbs |
| Finish Type | Powder Coated |
| Material | Steel |
| Item Weight (Product) | 1 Pounds |
| Package Weight | 41.277 kg (approx. 90.9 lbs) |
| Product Dimensions | 15.5 x 12 x 5.25 inches |
| Package Dimensions | 25.4 cm L x 35.56 cm W x 83.82 cm H |
| Country of Origin | United States |
| UPC | 798459010786 |
9. Warranty & Support
9.1 Warranty Information
The Blue Ox BXW0750-S Swaypro Weight Distributing Hitch comes with a Limited Lifetime Warranty. This warranty covers defects in materials and workmanship under normal use. For specific terms, conditions, and limitations of the warranty, please refer to the official warranty documentation provided with your product or visit the Blue Ox website.
9.2 Customer Support
For technical assistance, installation questions, or warranty claims, please contact Blue Ox customer support directly. It is recommended to have your product model number (BXW0750-S) and purchase information ready when contacting support.
You can visit the official Blue Ox website for contact details and additional resources: www.blueox.com
