1. Overview
The Lutron Maestro Wireless 8 Amp Multi-location Switch (model MRF2-8S-DV-WH) is designed to provide control for lighting and fans in various locations. This switch utilizes Clear Connect Radio Frequency (RF) Technology for reliable communication within a system of up to 10 devices. It is compatible with incandescent, halogen, MLV, ELV, non-dim fluorescent ballasts, and general-purpose fans.
Key features include:
- Controls an 8 Amp light or a 5.8 Amp fan.
- Supports multi-location control with up to 10 companion devices.
- Features Clear Connect RF Technology for robust wireless communication.
- Integrated LED indicator glows brightly when on and softly when off, serving as a night light.
- Designed for standard single-pole and 3-way wiring configurations.
Figure 1: Front view of the Lutron Maestro Wireless 8 Amp Multi-location Switch. The switch features a clean white finish with a small green LED indicator light on the left side and the Lutron logo at the bottom.
2. Safety Information
WARNING: Risk of Electric Shock. Improper installation can result in serious injury or death. Always turn off power at the circuit breaker or fuse box before installing or servicing this device. This product must be installed in accordance with all national and local electrical codes.
- Do not use with any device that exceeds the specified wattage or amperage.
- For indoor use only.
- Ensure all wire connections are secure and properly insulated.
- If you are unsure about any part of these instructions, consult a qualified electrician.
- This device is designed for 120 V~ 60 Hz operation.
3. Specifications
| Feature | Detail |
|---|---|
| Model Number | MRF2-8S-DV-WH |
| Brand | Lutron |
| Operating Voltage | 120 Volts |
| Current Rating | 8 Amps (lights), 5.8 Amps (fans) |
| Wattage | 960 watts |
| Circuit Type | Single-pole, 3-way |
| Connectivity Protocol | Radio Frequency (RF) - Clear Connect |
| Actuator Type | Push Button |
| International Protection Rating | IP54 |
| Dimensions (L x W x H) | 2.5 x 2.5 x 4.5 inches |
| Color | White |
| Warranty | 1 year limited warranty |
Figure 2: Close-up view of the product label on the back of the Lutron Maestro Wireless Switch, showing model number, electrical ratings (120-277V~, 50/60Hz, 8A Lighting/5.8A Fan), and regulatory information.
4. Installation
Before beginning installation, ensure you have read and understood all safety warnings. This switch is designed for easy installation in standard single-pole and 3-way wiring configurations.
4.1 Tools Required
- Screwdriver (Phillips and/or flathead)
- Wire strippers
- Electrical tape
- Voltage tester
4.2 Installation Steps
- Turn Off Power: Locate the circuit breaker or fuse that controls the switch you are replacing. Turn off the power completely. Verify power is off using a voltage tester.
- Remove Existing Switch: Carefully remove the wall plate and unscrew the existing switch from the wall box. Disconnect the wires from the old switch, noting their connections.
- Identify Wires: Identify the line (hot), load, neutral (if present), and ground wires. For 3-way installations, identify the traveler wires.
- Wire the New Switch: Connect the wires from the wall box to the Lutron Maestro switch according to the wiring diagram for your specific installation (single-pole or 3-way). Use wire nuts to secure connections.
- Mount the Switch: Gently push the wired switch into the wall box. Secure it with the provided screws.
- Attach Wall Plate: Install the new wall plate (sold separately, coordinates with Claro wall plates).
- Restore Power: Turn the power back on at the circuit breaker.
- Test Operation: Test the switch to ensure proper functionality.
Figure 3: Rear view of the Lutron Maestro Wireless Switch, showing the terminal screws for wiring connections and the green ground wire. Labels indicate "TURN OFF POWER / ARRETEZ LE COURANT" for safety.
Figure 4: Rear view of the Lutron Maestro Wireless Switch with yellow wire nuts attached to the wiring, demonstrating typical wire connection methods during installation.
5. Operation
The Lutron Maestro Wireless Switch is designed for intuitive control of your lights or fan.
- Turning On/Off: Press the large paddle switch to toggle the connected load (lights or fan) on or off.
- LED Indicator: A small LED on the switch illuminates brightly when the connected load is on. When the load is off, the LED glows softly, providing a subtle night light.
- Multi-location Control: When paired with compatible companion devices (up to 10), the switch can be controlled from multiple locations within the system. Refer to the companion device's instructions for pairing procedures.
6. Troubleshooting
If you experience issues with your Lutron Maestro Wireless Switch, refer to the following common problems and solutions:
| Problem | Possible Cause / Solution |
|---|---|
| Switch does not turn on/off load. |
|
| LED indicator is not working. |
|
| Multi-location control not working. |
|
If the problem persists after attempting these solutions, contact Lutron Technical Support.
7. Maintenance
The Lutron Maestro Wireless Switch requires minimal maintenance.
- Cleaning: To clean the switch, wipe it with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or internal components.
- No User-Serviceable Parts: There are no user-serviceable parts inside the switch. Do not attempt to open or repair the device.
8. Warranty and Support
Warranty: The Lutron Maestro Wireless Switch (MRF2-8S-DV-WH) is covered by a 1-year limited warranty on materials and manufacture from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
Technical Support: For technical assistance, wiring questions, or troubleshooting beyond the scope of this manual, please contact Lutron Technical Support. Lutron offers 24/7 technical support for their products.
Contact information for Lutron Technical Support can typically be found on the official Lutron website or included with the product packaging.
