EUFAB 11402 Quick Lock Single Instruction Manual

1. Introduction

This instruction manual provides essential information for the proper installation, operation, and maintenance of your EUFAB 11402 Quick Lock Single. Please read this manual thoroughly before using the product to ensure safe and efficient operation.

2. Product Overview

The EUFAB 11402 Quick Lock Single is a robust, lockable mechanism designed to provide a secure and convenient method for attaching compatible EUFAB bicycle carriers to a vehicle's towbar. This unit enhances the security of your bicycle carrier by offering a quick-release and lockable connection.

It is specifically intended for retrofitting the following EUFAB bicycle carrier models:

• BIKE TWO (Item No. 11411)
• BIKE THREE (Item No. 11412)
• CARLO PLUS (Item No. 11439)

Figure 2.1: The EUFAB 11402 Quick Lock Single unit, showing its main components and lever mechanism.

Figure 2.2: An alternative view of the EUFAB 11402 Quick Lock Single, highlighting its robust construction.

3. What's in the Box

Upon unpacking, please ensure all components are present and undamaged. The package for the EUFAB 11402 Quick Lock Single typically contains:

• One (1) EUFAB 11402 Quick Lock unit
• Keys for the locking mechanism
• Instruction leaflet (refer to this manual for detailed instructions)

Figure 3.1: The retail packaging for the EUFAB 11402 Quick Lock Single, indicating its contents.

4. Setup and Installation

The Quick Lock is designed for integration with compatible EUFAB bicycle carriers. It is crucial to refer to your specific EUFAB bicycle carrier manual (BIKE TWO, BIKE THREE, or CARLO PLUS) for detailed instructions on how to retrofit this Quick Lock mechanism onto your carrier.

General Installation Steps:

1. Prepare Carrier: Identify the designated mounting points on your EUFAB bicycle carrier where the Quick Lock unit is to be attached.
2. Attach Quick Lock: Securely fasten the Quick Lock unit to the bicycle carrier using the appropriate hardware (typically provided with the carrier or Quick Lock). Ensure all bolts and nuts are tightened according to the carrier's specifications.
3. Verify Stability: Confirm that the Quick Lock is firmly attached to the bicycle carrier and there is no excessive movement or play.
4. Initial Fitment: Once the Quick Lock is integrated into the carrier, the entire assembly is ready to be mounted onto the vehicle's towbar.

Figure 4.1: Side view of the EUFAB 11402 Quick Lock Single integrated into a bicycle carrier, ready for towbar attachment.

Figure 4.2: Rear view of the EUFAB 11402 Quick Lock Single attached to a bicycle carrier, demonstrating its position relative to the vehicle.

Figure 4.3: Unfolded packaging illustrating general installation diagrams for the Quick Lock mechanism.

5. Operating Instructions

Attaching the Bicycle Carrier to the Towbar:

1. Position Carrier: Carefully lift the bicycle carrier (with the Quick Lock attached) and position it onto the vehicle's towbar. Ensure the carrier is centered and level.
2. Engage Quick Lock: Firmly press down the lever of the Quick Lock mechanism. Continue applying pressure until the mechanism securely clamps onto the towbar. You should feel a distinct resistance or hear a click, indicating proper engagement.
3. Verify Security: Attempt to move the carrier. It should be firmly attached to the towbar with no significant play.

Locking the Mechanism:

1. Once the Quick Lock is engaged on the towbar, insert the provided key into the lock cylinder.
2. Turn the key to secure the Quick Lock in the locked position.
3. Remove the key and store it in a safe place. This prevents unauthorized removal of the bicycle carrier.

Detaching the Bicycle Carrier from the Towbar:

1. Unlock Mechanism: Insert the key into the lock cylinder and turn it to the unlocked position. Remove the key.
2. Release Quick Lock: Lift the lever of the Quick Lock mechanism to disengage it from the towbar.
3. Remove Carrier: Carefully lift the bicycle carrier off the towbar.

6. Maintenance

To ensure the longevity and reliable performance of your EUFAB 11402 Quick Lock Single, regular maintenance is recommended:

• Inspection: Periodically inspect the Quick Lock for any signs of wear, damage, cracks, or corrosion. Pay close attention to the clamping mechanism and the lock cylinder.
• Cleaning: Keep the mechanism clean and free from dirt, mud, and road salt. Use a damp cloth to wipe down surfaces. Avoid harsh chemicals that may damage the finish.
• Lubrication: Apply a small amount of suitable lubricant (e.g., silicone spray or light grease) to the moving parts of the clamping mechanism and the lock cylinder once or twice a year, or more frequently if used in harsh conditions.
• Storage: When not in use, store the bicycle carrier with the Quick Lock attached in a dry, protected environment to prevent exposure to extreme weather conditions.

7. Troubleshooting

If you encounter issues with your EUFAB 11402 Quick Lock Single, consider the following:

• Difficulty Engaging: If the Quick Lock does not engage properly on the towbar, check for any obstructions on the towbar surface or within the clamping mechanism. Ensure the bicycle carrier is correctly positioned and aligned.
• Stiff Lever: If the lever is stiff or difficult to operate, apply lubricant to the pivot points and the clamping surfaces.
• Key Issues: If the key is difficult to turn or remove, apply a small amount of graphite lubricant into the lock cylinder. Do not force the key.
• Loose Fit: If the carrier feels loose after engaging the Quick Lock, re-check the installation of the Quick Lock onto the bicycle carrier itself. Ensure all fasteners are tight.
• Persistent Problems: If problems persist after attempting these troubleshooting steps, please contact EUFAB customer support for further assistance.

8. Specifications

9. Warranty and Support

The EUFAB 11402 Quick Lock Single is covered by a manufacturer's warranty. For specific details regarding warranty terms, duration, and claim procedures, please refer to the warranty information included with your purchase or visit the official EUFAB website.

For technical assistance, product inquiries, or to report any issues, please contact EUFAB customer support. Contact information can typically be found on the product packaging or the official EUFAB website.