Arachnid Professional Series SFP900 Soft Tip Darts Instruction Manual

Introduction

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Arachnid Professional Series SFP900 Soft Tip Darts. Designed for use with electronic dartboards, this set features high-quality 90% tungsten barrels for precision and durability. Please read these instructions carefully before use to ensure optimal performance and longevity of your darts.

Product Components

Your Arachnid Professional Series SFP900 dart set includes the following components:

3x 90% Tungsten Soft Tip Darts (18g each)
3x Spare Flights (2D or waffle design)
3x Spare Aluminum Shafts
7x Spare 3/16 inch Soft Tips
1x Deluxe SideRider Storage Case

Arachnid SFP900 dart set with darts, spare flights, shafts, and tips displayed inside an open black SideRider case.

Image: The Arachnid SFP900 dart set, showcasing three assembled darts, spare flights, shafts, and tips neatly organized within the open deluxe SideRider case. The case is designed for secure storage and easy access to all components.

Closed black deluxe SideRider storage case for Arachnid SFP900 darts.

Image: The deluxe SideRider storage case in its closed position, a compact and durable black case designed to protect and transport the Arachnid SFP900 dart set. It features a secure clasp and a design that can clip to a belt.

Setup

Assembling Your Darts

Your Arachnid SFP900 darts come partially disassembled for protection during transport. Follow these steps to assemble them:

Attach the Shafts: Screw the aluminum shafts clockwise into the threaded end of the tungsten barrels until they are finger-tight. Do not overtighten.
Insert the Flights: Gently slide the flights into the four slots at the end of the shafts. Ensure they are fully seated and symmetrical.
Secure the Tips: Ensure the 3/16 inch soft tips are firmly screwed into the front of the barrels. Hand-tighten only.

Your darts are now ready for use. Always inspect all components for tightness before each game.

Operating Instructions

Using Your Soft Tip Darts

These Arachnid SFP900 darts are specifically designed for use with electronic dartboards. The soft tips are intended to safely register scores on the segmented surface of such boards.

Dartboard Compatibility: Always ensure your dartboard is an electronic model compatible with soft tip darts. Using these darts on traditional bristle dartboards can damage the board and the dart tips.
Pre-Game Check: Before each game, quickly check that all dart components (tips, barrels, shafts, flights) are securely attached and free from damage. Replace any worn or broken parts using the included spares.
Throwing Technique: Hold the dart comfortably, typically gripping the barrel. Aim for the desired segment on the electronic dartboard and throw with a smooth, consistent motion.
Retrieving Darts: When retrieving darts from the board, grasp the barrel and pull straight out. Avoid twisting or bending the dart, as this can damage the tips or shafts.

Maintenance

Care and Cleaning

Proper maintenance will extend the life and performance of your Arachnid SFP900 darts:

Tip Inspection: Regularly inspect the soft tips for signs of wear, bending, or breakage. Replace damaged tips promptly using the spare tips provided.
Shaft Care: Check aluminum shafts for bends or cracks. Bent shafts can affect dart flight. Replace damaged shafts with the included spares.
Flight Maintenance: If flights become bent or torn, they can be straightened carefully or replaced with spare flights to maintain optimal aerodynamics.
Cleaning: Wipe the dart barrels and shafts with a soft, dry cloth to remove any dirt or residue. Avoid using harsh chemicals or abrasive cleaners.
Storage: Always store your darts in the deluxe SideRider case when not in use. This protects them from damage and keeps all components organized. The case can be clipped to your belt for convenient transport.

Troubleshooting

Here are solutions to common issues you might encounter:

Issue	Solution
Dart not sticking to electronic dartboard.	Check if the soft tip is bent, broken, or worn. Replace with a spare tip if necessary. Ensure the tip is securely screwed into the barrel. Verify the electronic dartboard is functioning correctly and its segments are not overly worn.
Flights frequently fall out of shafts.	Ensure flights are fully inserted into the shaft slots. Inspect the shaft slots for damage or widening. If damaged, replace the shaft with a spare.
Shafts bending or breaking easily.	This can occur from darts hitting hard surfaces or other darts. Replace with spare aluminum shafts. Ensure darts are retrieved carefully from the board without excessive force or twisting.

Specifications

Model: SFP900
Dart Weight: 18 Grams per dart
Barrel Material: 90% Tungsten
Shaft Material: Aluminum
Tip Type: Soft Tip (3/16 inch)
Included Components: 3 Darts, 3 Spare Flights, 3 Spare Shafts, 7 Spare Tips, Deluxe SideRider Case
Product Dimensions (Case): Approximately 9.5 x 7.1 x 0.9 inches (24.13 x 18.03 x 2.29 cm)
Total Package Weight: Approximately 280 grams

Warranty Information

The Arachnid Professional Series SFP900 Soft Tip Darts come with a one-year warranty against manufacturing defects. This warranty covers defects in materials and workmanship under normal use. The ARACHNID brand is a registered trademark owned by ARACHNID 360 LLC and used by Escalade Sports under license. Please retain your proof of purchase for warranty claims.

Support

For further assistance, technical support, or to inquire about replacement parts not included in this set, please visit the official Arachnid website or contact Escalade Sports customer service. Contact information can typically be found on the product packaging or the manufacturer's official website.

Arachnid SFP900