Tenergy 9.6V 2000mAh NiMH Nunchuck Airsoft Battery Instruction Manual

1. Product Overview

The Tenergy 9.6V 2000mAh NiMH Nunchuck Battery is designed for use with airsoft guns, providing reliable power and extended runtime. This rechargeable battery pack consists of 8 NiMH AA cells and features a Mini Tamiya connector for compatibility with various airsoft models.

Key Features:

• 9.6V 2000mAh capacity for long run time.
• NiMH chemistry for rapid charge and consistent performance.
• Mini Tamiya female connector with 16 G wire.
• Nunchuck style configuration for flexible fit in airsoft gun compartments.

Figure 1: Tenergy 9.6V 2000mAh NiMH Nunchuck Airsoft Battery.

2. Compatibility and Dimensions

This battery is compatible with popular airsoft gun models such as M249, M240B, M14, RPK, PKM, L85, AUG, and G3. For upgraded or modified AEGs, it is recommended to measure the gun compartment to ensure the best fit. The battery features a Mini Tamiya connector.

Battery Dimensions:

• Each stick maximum dimensions: 4.06 inches (length), 1.18 inches (width), 0.79 inches (height).
• Weight: 7.34 oz.

Figure 2: Compatibility guide for various airsoft gun models. Please verify your gun's battery compartment dimensions.

Figure 3: Detailed dimensions of the Tenergy 9.6V 2000mAh NiMH Nunchuck Battery and its Mini Tamiya connector.

3. Charging Instructions

To ensure optimal performance and longevity of your Tenergy 9.6V NiMH battery, use a compatible Tenergy charger. The battery features rapid charge capability.

Compatible Chargers:

• Tenergy 6V-12V RC battery charger.
• Other Tenergy Smart AC Chargers for 8.4V-9.6V NiMH Battery Packs.
• Tenergy TB6-B Balance Charger.

Figure 4: Examples of compatible Tenergy chargers for your 9.6V NiMH battery, including 6V-12V, 8.4V-9.6V Smart AC, and TB6-B Balance Chargers.

4. Operating the Battery

Once charged, connect the battery to your airsoft gun's Mini Tamiya connector. Ensure a secure connection before operation. The 2000mAh capacity provides a long runtime, enhancing your airsoft experience.

Figure 5: The 2000mAh capacity of the Tenergy NiMH battery ensures extended play time for your airsoft gun.

5. Maintenance and Storage

To maintain the battery's performance and extend its lifespan:

• Always use a compatible charger.
• Avoid overcharging or deep discharging the battery.
• Store the battery in a cool, dry place away from direct sunlight and extreme temperatures.
• If storing for extended periods, charge the battery to approximately 50% capacity.
• Dispose of the battery responsibly according to local regulations. The battery is recyclable.

6. Troubleshooting

If you encounter issues with your battery, consider the following:

• Battery Not Fitting: Verify the dimensions of your gun's battery compartment against the battery specifications. Some upgraded or modified AEGs may require specific battery configurations.
• Reduced Performance: Ensure the battery is fully charged using a compatible charger. Check for secure connections between the battery and the airsoft gun. Over time, battery performance can degrade; consider replacing older batteries.
• Charging Issues: Confirm that the charger is correctly plugged in and the battery is properly connected. If the charger has indicator lights, refer to its manual for error codes.

For further assistance, please contact Tenergy customer support.

7. Specifications

8. Warranty and Support

Tenergy products are designed for reliability and performance. For any questions, technical support, or warranty inquiries, please contact Tenergy Customer Support. Tenergy is based in Silicon Valley, California, and has been established since 2004, providing dedicated customer service.