Introduction
The Behringer V-Amp 2 is a virtual guitar amplifier and multi-effects processor designed to provide a wide range of amplifier and speaker simulations, along with various digital effects. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your V-Amp 2 unit.
Important Safety Instructions
- Read these instructions thoroughly before operating the device.
- Keep these instructions for future reference.
- Heed all warnings and follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Product Overview
The Behringer V-Amp 2 offers a comprehensive suite of tools for guitarists, combining amplifier and speaker modeling with a versatile multi-effects processor. Key features include:
- 32 Amp Models: A wide selection of classic and modern amplifier simulations.
- 15 Speaker Cabinet Models: Independently selectable cabinet simulations to pair with any amp model.
- 24-bit Stereo Multi-Effects Processor: High-resolution effects including chorus, flanger, phaser, tremolo, delay, and more.
- Separate Wah-Wah and Reverb Effects: Dedicated controls for these essential effects.
- 3-Band EQ: An effective equalizer with characteristics that adapt to the selected amp model.
- Five Configuration Modes: Optimized settings for various applications, such as direct recording, connecting to a guitar amp, or using with headphones.
Figure 1: Front panel of the Behringer V-Amp 2, showing controls and display.
Setup Guide
Follow these steps to connect your Behringer V-Amp 2:
- Power Connection: Connect the supplied power adapter to the DC input jack on the rear panel of the V-Amp 2. Plug the adapter into a suitable power outlet. Ensure the unit is powered off before connecting or disconnecting the power supply.
- Guitar Input: Connect your guitar to the INPUT jack on the front panel using a standard 1/4-inch instrument cable.
- Audio Output:
- To a Guitar Amplifier: Connect the OUTPUT L/MONO jack to the input of your guitar amplifier. For stereo effects, connect OUTPUT R to a second amplifier or a stereo power amp.
- To a Mixer/Audio Interface: Use the OUTPUT L/MONO and OUTPUT R jacks to connect to the line inputs of a mixing console or audio interface.
- Headphones: Plug your headphones into the PHONES jack on the front panel for silent practice.
- MIDI Connections (Optional):
- Connect a MIDI cable from your computer's MIDI interface OUT to the V-Amp 2's MIDI IN jack.
- Connect a MIDI cable from the V-Amp 2's MIDI OUT jack to your computer's MIDI interface IN. This allows for remote control and editing via MIDI software.
Operating Instructions
The V-Amp 2 features intuitive controls for quick sound adjustments and deep editing capabilities.
Basic Controls
- GAIN Knob: Adjusts the input gain, affecting the amount of distortion.
- BASS, MID, TREBLE Knobs: Control the 3-band equalizer. The response of these controls varies depending on the selected amp model.
- VOLUME Knob: Controls the overall output level of the V-Amp 2.
- AMP/CAB Buttons: Select different amplifier and speaker cabinet models. Use the associated display to navigate through options.
- EFFECTS Buttons: Activate and adjust parameters for the various digital effects.
- WAH/REVERB Knobs: Dedicated controls for Wah-Wah and Reverb effects.
- TAP Button: Used for setting the tempo of time-based effects like delay.
- TUNER Button: Activates the built-in chromatic tuner.
Selecting and Editing Presets
The V-Amp 2 comes with numerous factory presets. You can select them using the PRESET buttons or by rotating the main data encoder. To edit a preset:
- Select the desired preset.
- Adjust the GAIN, EQ, VOLUME, AMP, CAB, and EFFECT parameters to your preference.
- To save your changes, press and hold the STORE button. The display will prompt you to select a memory location. Use the data encoder to choose a location and press STORE again to confirm.
Configuration Modes
The V-Amp 2 offers five configuration modes to optimize its output for different setups. These modes adjust the frequency response to best suit the connected equipment (e.g., guitar amp, full-range system, headphones). Refer to the detailed manual (available on the Behringer website) for instructions on how to select and customize these modes.
MIDI Editor Software
For advanced editing and patch management, Behringer provides a dedicated MIDI editor software. This software allows for deeper control over parameters and easier organization of your custom sounds. The software can typically be downloaded from the official Behringer website. A MIDI interface is required to connect the V-Amp 2 to your computer for this functionality.
Maintenance
- Cleaning: Clean the unit with a soft, dry cloth. Do not use liquid cleaners or solvents.
- Storage: When not in use for extended periods, store the V-Amp 2 in a dry, dust-free environment.
- Power Supply: Handle the power supply and its connector with care. Avoid bending or applying excessive force to the connector, as it can be fragile. Always grasp the plug, not the cable, when disconnecting.
- Ventilation: Ensure that the ventilation openings are not obstructed to prevent overheating.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound output. |
|
|
| Sound is distorted or noisy. |
|
|
| Preset volumes are inconsistent. |
|
|
| MIDI control not working. |
|
|
Specifications
| Feature | Detail |
|---|---|
| Model Number | V-AMP2 |
| Item Weight | 7.5 pounds |
| Product Dimensions | 18.58 x 12.99 x 4.49 inches |
| Output Wattage | 20 Watts (Note: This refers to the internal processing, not an actual power amplifier output for speakers.) |
| Amp Models | 32 |
| Speaker Cabinet Models | 15 |
| Effects Processor | 24-bit Stereo Multi-Effects |
| EQ | 3-band, amp-model dependent |
| Configuration Modes | 5 |
