1. Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your 360 Lighting Davis Modern Flush Mount Ceiling Light Fixture. This fixture features an 11-inch wide brushed nickel finish band and a frosted glass dome shade, designed for various indoor spaces such as bedrooms, kitchens, living rooms, hallways, and bathrooms.
Image 1.1: The 360 Lighting Davis Modern Flush Mount Ceiling Light Fixture, showcasing its brushed nickel base and frosted glass dome.
2. Safety Information
Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be hazardous or fatal. Keep these instructions for future reference.
- UL Listed: This fixture is UL listed, indicating compliance with safety standards.
- Electrical Safety: All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
- Power Disconnection: Always disconnect power at the main circuit breaker or fuse box before beginning installation or performing any maintenance.
- Bulb Type: Use only one maximum 100-watt standard-medium base (E26) light bulb. Do not exceed the recommended wattage.
- Handling: Handle glass components with care to prevent breakage.
3. Package Contents
Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, do not attempt to assemble or install the fixture.
- Flush Mount Fixture Base (Brushed Nickel)
- Frosted Glass Dome Shade
- Mounting Hardware (screws, wire nuts, mounting bracket)
- Instruction Manual
Note: Light bulb is not included.
4. Setup and Installation
Before installation, ensure the power is turned off at the circuit breaker. This fixture is designed for flush mount installation on a standard ceiling junction box.
Image 4.1: Dimensions of the fixture, measuring 11 inches wide and 3.625 inches high.
- Prepare the Area: Turn off the power at the main circuit breaker. Clear the work area and ensure you have all necessary tools (screwdriver, wire strippers, ladder).
- Attach Mounting Bracket: Secure the mounting bracket to the ceiling junction box using the screws provided. Ensure the bracket is firmly attached.
- Make Electrical Connections: Connect the fixture's wires to the house electrical wires. Connect the black wire from the fixture to the black (hot) wire from the ceiling, the white wire from the fixture to the white (neutral) wire from the ceiling, and the bare copper or green ground wire from the fixture to the house ground wire. Secure connections with wire nuts.
- Mount the Fixture Base: Carefully tuck the wires into the junction box. Align the fixture base with the mounting bracket and secure it with the provided screws.
- Install Light Bulb: Screw one standard-medium base (E26) light bulb (max 100W, not included) into the socket.
- Attach Glass Shade: Carefully place the frosted glass dome shade onto the fixture base and secure it according to the design (typically by twisting or using decorative nuts).
- Restore Power: Turn the power back on at the main circuit breaker.
5. Operating Instructions
Once installed and powered, the 360 Lighting Davis Flush Mount Ceiling Light Fixture operates via a standard wall switch connected to the electrical circuit. Ensure a compatible E26 base bulb is installed.
- Turning On/Off: Flip the wall switch to the 'ON' position to illuminate the fixture. Flip it to the 'OFF' position to turn off the light.
- Bulb Compatibility: This fixture is designed for one E26 base bulb, up to 100 watts. Using bulbs with different bases or higher wattage may damage the fixture or create a fire hazard.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your light fixture. Always disconnect power before cleaning or replacing bulbs.
- Cleaning: To clean the fixture, wipe the brushed nickel finish with a soft, dry cloth. For the glass shade, use a mild glass cleaner on a soft cloth. Avoid abrasive cleaners or solvents that may damage the finish or glass.
- Bulb Replacement: Ensure power is off. Carefully remove the glass shade. Unscrew the old bulb and screw in a new E26 base bulb (max 100W). Reattach the glass shade securely.
7. Troubleshooting
If you encounter issues with your light fixture, refer to the table below for common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | 1. Power is off at the circuit breaker. 2. Bulb is loose or burned out. 3. Incorrect wiring. | 1. Check the circuit breaker and ensure power is on. 2. Tighten or replace the light bulb. 3. Verify all electrical connections are correct and secure. Consult an electrician if unsure. |
| Light flickers. | 1. Loose bulb. 2. Loose wiring connection. 3. Incompatible dimmer switch (if applicable). | 1. Tighten the light bulb. 2. Check and secure all wiring connections (with power off). 3. Ensure dimmer switch is compatible with the bulb type. |
| Glass shade is difficult to attach/remove. | Misalignment or overtightening. | Ensure the shade is aligned correctly with the fixture's grooves or mounting points. Do not overtighten. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | 360 Lighting |
| Model Number | 12017 |
| Product Dimensions | 11"L x 11"W x 3.5"H |
| Item Weight | 2.66 Pounds |
| Material | Metal (Brushed Nickel), Glass (Frosted) |
| Finish Type | Brushed Nickel |
| Installation Type | Flush Mount |
| Light Source Type | LED (compatible, bulb not included) |
| Bulb Base | E26 (Standard-Medium) |
| Maximum Wattage | 100 Watts |
| Voltage | 120 Volts |
| Indoor/Outdoor Usage | Indoor |
| Certifications | UL Listed |
9. Warranty and Support
This product is manufactured by Lamps Plus. For warranty information or technical support, please refer to the documentation provided at the time of purchase or contact the retailer/manufacturer directly. Keep your purchase receipt for warranty claims.
For further assistance, you may visit the 360 Lighting store online or contact their customer service department.
Manufacturer: Lamps Plus