Important Safety Instructions
Read all instructions thoroughly before operating the VCR. Keep this manual in a safe place for future reference.
- Do not expose this appliance to rain or moisture to prevent fire or electric shock hazards.
- Ensure adequate ventilation. Do not block any ventilation openings. Maintain a minimum distance around the apparatus for sufficient ventilation.
- Ensure proper grounding. Connect the power cord to a grounded AC outlet.
- Disconnect the power plug from the wall outlet before cleaning the unit. Use a dry cloth only.
- Refer all servicing to qualified service personnel. Do not attempt to service this product yourself.
Product Overview
The Daewoo DV-T47N is a 4-head mono Video Cassette Recorder (VCR) designed for high-quality recording and playback of VHS format video cassettes. Key features include an 8-event/1-year timer recording capability and convenient front audio/video inputs for connecting external devices.
Figure 1: Front view of the Daewoo DV-T47N VCR, displaying the cassette slot, primary control buttons, and front audio/video input jacks. RCA cables are shown on top of the unit.
Setup
1. Unpacking and Placement
Carefully remove the VCR from its packaging. Place the unit on a stable, level surface that allows for adequate ventilation around all sides. Avoid placing the VCR near heat sources, in direct sunlight, or in enclosed cabinets without airflow.
2. Connecting to a Television
Use the provided RCA audio/video cables to connect the VCR to your television or monitor.
- Connect the yellow video output jack on the VCR to the yellow video input jack on your television.
- Connect the white audio output jack on the VCR to the white audio input jack on your television.
- (Optional) If your television has a red audio input, and your VCR has a red audio output, connect them. Note that this model features mono audio, so only one audio channel (typically white) is necessary for sound.
Figure 2: Front view of the VCR with RCA cables connected, illustrating the proper connection of audio and video cables to the input/output ports.
3. Power Connection
Plug the VCR's power cord into a standard AC 120V, 60Hz wall outlet.
Operating Instructions
1. Basic Playback
- Insert a VHS cassette into the VCR's tape slot. The VCR may automatically pull the tape in.
- Press the PLAY button. The VCR will begin playback of the cassette.
- To stop playback, press the STOP button.
- To eject the tape, press the EJECT button.
2. Recording
To record from an external source (e.g., a camcorder or another video device connected to the front A/V inputs):
- Connect the external device to the front audio/video input jacks on the VCR.
- Insert a recordable VHS cassette into the VCR. Ensure the record-protection tab on the cassette is intact.
- Select the appropriate input source on your VCR (this may involve cycling through input modes on the VCR or selecting the correct input on your TV for the VCR's output).
- Press the RECORD button. Recording will begin.
- To stop recording, press the STOP button.
3. Commercial Skip
The Commercial Skip feature allows you to fast-forward through segments of a program, typically used to skip commercials during playback. Press the COMMERCIAL SKIP button to advance playback by a preset interval (e.g., 30 seconds or 1 minute).
Maintenance
1. Cleaning the Exterior
Wipe the exterior surfaces of the VCR with a soft, dry cloth. Do not use liquid cleaners, abrasive pads, or aerosol sprays, as these can damage the finish or internal components.
2. Head Cleaning
If you experience degraded picture quality, such as snow, streaks, or distorted images during playback, the video heads may be dirty. Use a commercially available VHS head cleaning cassette according to its specific instructions. Excessive use of cleaning cassettes can cause wear on the heads.
3. Tape Care
Store VHS tapes in their original cases, away from direct sunlight, dust, and strong magnetic fields (e.g., speakers). Avoid exposing tapes to extreme temperatures or humidity, which can damage the tape and the VCR.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cord unplugged; wall outlet not active. | Check power cord connection to VCR and wall outlet. Test the outlet with another device. |
| No picture or sound during playback | Incorrect TV input selected; A/V cables loose or connected incorrectly. | Select the correct TV input (e.g., Video 1, AV, Input). Ensure A/V cables are securely connected to the correct color-coded jacks on both the VCR and TV. |
| Poor picture quality (snowy, distorted, lines) | Dirty video heads; damaged VHS tape. | Use a VHS head cleaning cassette. Try playing a different, known-good tape. |
| Tape will not eject | VCR mechanism jam; temporary electronic malfunction. | Turn the VCR off, wait 30 seconds, then turn it back on and try ejecting again. If the problem persists, do not force the tape; seek professional service. |
Specifications
- Model: DV-T47N
- Heads: 4-Head
- Audio: Mono
- Timer Recording: 8 Event / 1 Year
- Inputs: Front Audio/Video (RCA)
- Power Supply: AC 120V, 60Hz, 17W
- Dimensions (W x H x D): Approximately 14.2 x 3.6 x 9.3 inches
- Weight: Approximately 5 pounds
- FCC ID: C5F7NF0008
Figure 3: Top view of the Daewoo DV-T47N VCR, showcasing its overall form factor.
Figure 4: Close-up of the serial number label located on the underside of the VCR. The serial number shown is 42J01840.
Figure 5: Close-up of the regulatory label on the VCR's underside, detailing the model number DV-T47N, power requirements, FCC ID C5F7NF0008, and manufacturer information.
Figure 6: View of the regulatory label and the rear audio/video output ports on the Daewoo DV-T47N VCR.
Warranty and Support
Warranty Information
This product is typically covered by a limited manufacturer's warranty. Please refer to the warranty card or documentation included with your original purchase for specific terms and conditions, including the warranty period, coverage details, and any exclusions.
Customer Support
For technical assistance, service inquiries, or to obtain replacement parts, please contact Daewoo Electronics customer support. Contact information can usually be found on the manufacturer's official website or in the product packaging.
Manufacturer: DAEWOO ELECTRONICS AMERICA INC.
Address: 120 CHUBB AVE., LYNDHURST, NJ 07107
