ARMYTEK ELF C2 Multi Flash Light
Product Usage Instructions
- Turn off the flashlight before charging.
- Connect the charging cable to the flashlight.
- Check the color indication in the button:
- The approximate charging time for a fully discharged battery is 4 hours 30 minutes.
- Use adapters with at least 1A current for optimal charging.
- Use branded 18650 Li-Ion batteries without PCB (unprotected) up to 70mm long for effective operation.
- Turbo mode can generate high heat quickly, leading to battery discharge.
- Free warranty repairs are provided by Armytek for 10 years from the date of purchase (excluding specific components).
- Ensure to keep the purchase document for warranty claims.
- Warranty exclusions include improper usage, modifications by non-qualified personnel, exposure to certain liquids, high temperatures, and low-quality batteries.
FAQ
- Q: What type of batteries should I use with the ELF C2 flashlight?
- A: We recommend using branded 18650 Li-Ion batteries without PCB (unprotected) up to 70mm long for optimal performance.
- Q: How long does it take to charge a fully discharged battery?
- A: The approximate charging time for a fully discharged battery is 4 hours and 30 minutes.
Scan to view the full manual
USER MANUAL
- Thank you for choosing the products of Armytek.
Before use
- Tighten the tailcap as far as it can go.
In OFF state
- click: To turn on the last used mode.
Press and hold: To start cycling through Firefly modes. Release to select. Keeping the button pressed will start cycling through the Main modes.
In ON state
- click: To turn off the flashlight.
Press and hold: To start cycling through the Main modes from any mode. In Firefly1 cycling through Main modes starts after cycling through Firefly modes. Release to select. - clicks: To turn on Turbo mode from any mode. The second double click brings back the last used mode.
MOMENTARY ACCESS
- Firefly. Press and hold the button in the OFF state to start cycling through Firefly modes.
- Release to select. Keeping the button pressed will start cycling through the Main modes.
- Main. A short click from the OFF state activates the Main mode if it is the last used mode.
- Turbo. Double-click in any mode in the ON state. The second double click brings back the last used mode.
Cycling through Main modes
- In the ON state press and hold the button in any mode.
- The main modes will start switching cyclically.
- In Firefly1 cycling through Main modes starts after cycling through Firefly modes. Release to select.
Lamp mode. The flashlight can work without a battery in Firefly1, Firefly2, and Main1 modes.
For this connect the USB-C cable to the flashlight and power source, and remove the battery.
- click: To turn on/off the flashlight.
Press and hold: To start cycling through modes.
For activation of the timer, unscrew the tailcap to 1/4 while the flashlight is off, press the button, and tighten the tailcap while keeping the button pressed.
- Press and hold the button for 5 seconds. When the flashlight starts flashing with the main LED, release the button. Press the button the required number of times to set the timer:
- 1 click – 2 min; 2 clicks – 5 min; 3 clicks and more – 10 min.
- The main LED will flash from 1 to 3 times, confirming the action:
- 1 flash – 2 min; 2 flashes – 5 min; 3 flashes – 10 min.
- After confirming the activation of the timer, the flashlight will work in the previously selected mode for a specified period. The next click turns the flashlight off and resets the timer.
To return to permanent on, unscrew the tailcap to 1/4 while the flashlight is off, press the button, release it, and tighten the tailcap.
Lock-out function
- Unscrew the tailcap to 1/4 for protection from accidental switching on.
FLASHLIGHT CHARGING
- Turn off the flashlight and connect the cable.
- Color indication in the button displays the charging stage: red — the flashlight is charging, green — the flashlight is charged.
- If there is no indication, the battery is removed or installed in the wrong polarity.
- The approximate time for charging a fully discharged battery is 4 h 30 min. We recommend using adapters with 1A current and higher.
WARNINGS
- For efficient operation of the flashlight, we recommend branded 18650 Li-Ion batteries without PCB (unprotected) no more than 70 mm long.
- The flashlight can get hot in Turbo mode quickly and discharge the battery with a high current. Don’t leave it without your attention as very bright light might heat objects and cause a fire.
- For storage or transportation of the flashlight in a pocket or a bag, it is necessary to activate the lock-out function to ensure protection from accidental switching on.
- It is forbidden to charge the battery inside the flashlight when the ambient temperature is below 0 °C.
WARRANTY AND SERVICE
Armytek provides free warranty repairs for 10 years (excluding batteries, chargers, mounts, holders, switches, and connectors, which have a 2-year warranty) from the date of purchase if there is a document confirming the purchase.
The warranty does not apply to magnets, silicone covers of connectors and buttons, silicone installation rings and holders, clips, silicone grips, holsters, lanyards, O-rings and pads, or Velcro tapes. The warranty also does not extend to damage during:
- Improper usage.
- Attempts to modify or repair the flashlight by nonqualified specialists.
- Application in chlorinated, contaminated liquids or seawater.
- Immersion into liquids in case of broken leakproofness.
- Exposure to high temperatures and chemicals, including the liquids from defective batteries.
- Usage of low-quality batteries.
Specifications are subject to change without notice.
CONTACT
- Armytek Worldwide / Representative and importer in the EU
- Germany, 10551 Berlin, Jonasstraße 6
- +1 (206) 785-95-74, +49 (30) 3119-68-00
- service@armytek.com
- www.armytek.com
Documents / Resources
 |
ARMYTEK ELF C2 Multi Flash Light [pdf] User Manual ELF C2 Multi Flash Light, ELF C2, Multi Flash Light, Flash Light, Light |