Arboleaf CS10E Smart Body Composition
Product Description
Product Specifications
Screen Display
Battery Installation
Remove the rear battery isolation tab to activate the power device. 
When the scale displays ‘Lo’, it indicates low battery and requires timely replacement of batteries (3xl.SV AM). 
To slide the battery compartment lock outward.
Initial Setup
Step 1: Download the “arboleaf” app and create an account
From Apple App Store (ios) or Google Play (Android), search for “arboleaf” and download it to your smart phone. You can also scan the QR code to download .
Download “arboleaf” app or scan the QR code
Register an account
Pair the scale with a smartphone.
Make sure Bluetooth is enabled on your phone. For Android 6.0 and above, Location also needs to be enabled. Pairing is done automatically. Bluetooth icon is displayed on the scale.
Open the “arboleaf” app
Apply pressure to turn on scale
Take Measurements
- Connecting to the Scale Using the App To use the scale for the first time, you need to connect it to the app via Bluetooth (refer to Initial setup). Otherwise, only weight measurements will be displayed. Subsequent uses will allow direct measurement without needing to reconnect.
- Stepping onto the Body Fat Scale Please step onto the body fat scale barefoot. Stand upright on the scale and firmly grip the handle with both hands. Wait for the weight to stabilize; a blinking weight indicates the measurement is complete.
After confirming the weight, proceed to measure body fat percentage and other body composition metrics Ensure that arms are positioned away from the sides of the body, with the inner thighs not in contact, maintaining an upright stance with arms raised until the measurement is complete.
Body Fat Scale Measurement Demonstration Body Illustration 
Body Fat Scale Measurement Demonstration – Foot Placement Illustration
Stand with feet parallel on the scale electrodes, ensuring inner thighs do not touch each other. 
Body Fat Scale Measurement Demonstration -Hand Demonstration Image
Thumb touching the oval electrode, four fingers touching the elongated electrode, with the handle connector wire facing downwards.
Displaying Measurement Results
The scale displays weight, body fat, body water, muscle mass, bone mass, visceral fat, BMI, and rotation (switching between weight and BMI data, each displayed for 3 seconds). For additional metrics, please refer to the app after measurement.
Display Screen Icon Guide
CAUTION
- Do not use with implanted medical electronic devices such as pacemakers, artificial hearts, or life-supporting medical electronic devices, or wearable medical electronic devices like electrocardiographs.
- Individuals with limb defects cannot use (measurement requires good contact with all eight electrode pads).
- Do not jump on the scale.
- It is recommended to measure at the same time each day under the same conditions.
- For accurate measurement, place the scale on a hard, flat surface
Documents / Resources
 |
arboleaf CS10E Smart Body Composition Scale [pdf] User Guide CS10E, CS10E Smart Body Composition Scale, CS10E, Smart Body Composition Scale, Body Composition Scale, Composition Scale |