Anycubic Kobra S1 Combo FDM 3D Printer
USER GUIDE
1. Bind the printer
After the printer is turned on, please bind the printer according to the following documents.
Kobra S1 Printer Binding Guide | Anycubic Wiki
2. Update the firmware
Step 1: Update the printer firmware
(1) First click the “Settings” icon “Device” “Printer information” from t he display screen to check whether the firmware version is the latest version. If the arrow below appears after the firmware version, then the printer’s firmware is not the latest version, please click the arrow to upgrade.
(2) The display screen will pop up to find new firmware version, please click “OK” to update the firmware.
(3) After the firmware update is complete, please restart the printer to check whether the firmware is updated.
Step 2: Update the ACE Pro firmware
(1) Click the “Settings” ic on “Device” “ACE 1 Information” from the display screen to check whether the firmware version is the latest version. If the arrow below appears after the firmware version, then the firmware is not the latest version, please click the arrow to upgrade t he firmware.
(2) The display screen will pop up to find new mcu ACE firmware version, please click “OK” to update the firmware.
(3) Click “Comfirm” to complete the firmware update of ACE Pro.
Usage Instructions
1. Bind the Printer
After turning on the printer, follow the Printer Binding Guide provided by Anycubic to bind the Kobra S1 printer.
2. Firmware Update
Step 1: Update Printer Firmware
- Click on the Settings icon – Device – Printer Information on the display screen to check the firmware version.
- If an arrow appears below the firmware version, it indicates that a newer version is available. Click the arrow to upgrade.
- When prompted, click OK to update the firmware.
- After the update is complete, restart the printer to verify the firmware update.
Step 2: Update ACE Pro Firmware
- Click on the Settings icon – Device – ACE 1 Information on the display screen to check the firmware version.
- If an arrow appears below the firmware version, upgrade the firmware by clicking the arrow.
- Click OK to update the firmware when prompted to install the new mcu ACE firmware version.
- Confirm to complete the ACE Pro firmware update.
Specifications:
- Product Name: Kobra S1
- Function: 3D Printer
- Manufacturer: Anycubic
FAQ (Frequently Asked Questions)
Q: How do I know if my printer’s firmware needs updating?
A: Check the firmware version in the Settings menu on the display screen. If an arrow appears below the version, an update is available.
Q: What should I do if the firmware update fails?
A: If the firmware update fails, ensure stable power supply and internet connection, then attempt the update again. If issues persist, contact customer support.
Documents / Resources
 |
Anycubic Kobra S1 Combo FDM 3D Printer [pdf] User Guide Kobra S1 Combo FDM 3D Printer, Kobra S1, Combo FDM 3D Printer, FDM 3D Printer, 3D Printer |
