Anker-LOGO

Anker A17Y0 Solarbank Output Switch

Anker-A17Y0-Solarbank-Output-Switch-PRODUCT

Specifications

  • Name: Anker SOLIX Solarbank E1600 0W Output Switch
  • Wireless Type: Bluetooth
  • Input Port: MC4
  • Voltage Range: 18-75V
  • Output Port: MC4
  • Temperature: -25-65°C
  • Dimensions: Net weight 296g
  • Waterproof Rating: IP65
  • Warranty: 10 years

Product Usage Instructions

Connecting Cables

  1. Connect the Solarbank to the Output Switch using the included MC4 output cables.
  2. Connect the Output Switch to the microinverter using the MC4 output cable.

Dual System:

  1. Connect the Solarbank to the Output Switch using the included MC4 output cables.
  2. Connect the Output Switch to the microinverter using the MC4 output cable.
  3. Repeat the above steps to connect to another Solarbank. There is one male and one female connector left unoccupied for the MC4 output cable.
  4. When installing two Solarbanks, you need to install a microinverter. In this situation, you can choose not to connect the Output Switch.

Using the App

  • Note: Before using the 0W Output Switch, make sure that the Solarbank has been configured.
  • Note: Update the app version to 2.0.2 or later. Make sure your firmware is also updated to the new version.

App Log In:

  • Bluetooth pairing steps with Anker SOLIX Solarbank E1600 0W Output Switch. Find the app device page.

Network Configuration

Step 1:

  • Find the app device page.
  • Tap at the top right corner of the Devices page.

Setting the Output to 0W

  1. Step 1: Tap [Family Load Setting]
  2. Step 2: Set to 0W

Frequently Asked Questions

Q: How do I configure the Output Switch to the network?

A: Follow the steps outlined in the “Network Configuration” section of the user guide. Make sure Bluetooth pairing is successful.

Q: What is the warranty period for the Anker SOLIX Solarbank E1600 0W Output Switch?

A: The product comes with a 10-year warranty from the date of purchase. For warranty claims, contact support@anker.com.

At a Glance

Anker-A17Y0-Solarbank-Output-Switch-FIG-1

What’s in the Box

Anker-A17Y0-Solarbank-Output-Switch-FIG-2

Anker SOLIX Solarbank E1600 0W Output Switch

Connecting Cables

Single Solarbank

  1. Connect the Solarbank to the Output Switch using the included MC4 output cables.
  2. Connect the Output Switch to the microinverter using the MC4 output cable.Anker-A17Y0-Solarbank-Output-Switch-FIG-3

Dual System

  1. Connect the Solarbank to the Output Switch using the included MC4 output cables.
  2. Connect the Output Switch to the microinverter using the MC4 output cable.
  3. Repeat the above steps to connect to another Solarbank. There is one male and one female connector left unoccupied for the MC4 output cable.
  • When installing two Solarbanks, you need to install a microinverter.
  • In this situation, you can choose not to connect the Output Switch.Anker-A17Y0-Solarbank-Output-Switch-FIG-4

Using the App

NOTE:

  • Before using the 0W Output Switch, make sure that the Solarbank has been configured.
  • Update the app version to 2.0.2 or later. Make sure your firmware is also updated to the new version.

NOTE:Anker-A17Y0-Solarbank-Output-Switch-FIG-5

App Log In

  • You can log in via your Anker account, Amazon, or Apple ID.
  • If you do not have an Anker account, you can tap [Sign Up] to sign up for an account:
  • Please prepare an email for the registration process. Passwords must contain 8-20 characters, uppercase and lowercase letters, numbers, and symbols.
  • Please ensure that the Solarbank has completed its network configuration first. Once the Solarbank has finished configuring, then proceed with the Bluetooth pairing steps with Anker SOLIX Solarbank E1600 0W Output Switch.
  • Find the app device page.

Network Configuration

  1. Step 1 Find the app device page.
    • Tap at the top right corner of the Devices page.Anker-A17Y0-Solarbank-Output-Switch-FIG-6 Anker-A17Y0-Solarbank-Output-Switch-FIG-7
  2. Step 2 Tap [Accessory].
    • Press the IoT button for 3s to make sure Anker SOLIX Solarbank E1600 0W Output Switch works normally.Anker-A17Y0-Solarbank-Output-Switch-FIG-8
  3. Step3: Tap [Add Accessory].Anker-A17Y0-Solarbank-Output-Switch-FIG-9
  4. Step4: Wait for Bluetooth to search.
    • Add an accessoryAnker-A17Y0-Solarbank-Output-Switch-FIG-10
  5. Step5: Tap [A17Y0].
    • Add an accessory device detectedAnker-A17Y0-Solarbank-Output-Switch-FIG-11
    • Add devices manuallyAnker-A17Y0-Solarbank-Output-Switch-FIG-12
  6. Step 6: Wait for Bluetooth pairing.
    • Scanning A17YOAnker-A17Y0-Solarbank-Output-Switch-FIG-13
  7. Step 7: Your Output Switch has successfully been configured to the network.
    • If the Bluetooth pairing process fails, you can try again.
    • Successfully A17YOAnker-A17Y0-Solarbank-Output-Switch-FIG-14

Setting the Output to 0W

  1. Step 1: Tap [Family Load Setting]Anker-A17Y0-Solarbank-Output-Switch-FIG-15 Anker-A17Y0-Solarbank-Output-Switch-FIG-16
  2. Step 2: Set to 0WAnker-A17Y0-Solarbank-Output-Switch-FIG-17 Anker-A17Y0-Solarbank-Output-Switch-FIG-18

Specifications

Specifications are subject to change without notice.

NameAnker SOLIX Solarbank E1600 0W Output Switch
Wireless typeBluetooth
Input portMC4
Voltage range18-75V
Output portMC4
Temperature-25-65℃
Dimensions100×90×47mm
Net weight296g
Waterproof ratingIP65
Warranty10 years

Customer Service

Documents / Resources

Anker A17Y0 Solarbank Output Switch [pdf] User Guide
A17Y0 Solarbank Output Switch, Solarbank Output Switch, Output Switch, Switch

References

Leave a comment

Your email address will not be published. Required fields are marked *