User Guide for Anker models including: A17Y0 Solarbank Output Switch, Solarbank Output Switch, Output Switch, Switch
Anker SOLIX Solarbank E1600 Solarspeicher – Balkonkraftwerkinfo
Anker SOLIX Solarbank E1600 Output Switch
Anker SOLIX Solarbank E1600 0W Output Switch - Anker EU
Anker SOLIX Solarbank E1600 0W Output Switch USER GUIDE (A17Y0) At a Glance What's in the Box Connecting Cables Single Solarbank Dual System Using the App App Log In Network Configuration Setting the Family Load to 0W Specifications At a Glance What's in the Box User Guide Anker SOLIX Solarbank E1600 0W Output Switch Connecting Cables Single Solarbank Connect Solarbank to the Output Switch using the included MC4 output cables. Connect the Output Switch to the microinverter using the MC4 output cable. Dual System Connect Solarbank to the Output Switch using the included MC4 output cables. Connect the Output Switch to the microinverter using the MC4 output cable. Repeat the above steps to connect to another Solarbank. There is one male and one female connector left unoccupied for the MC4 output cable. When installing two Solarbanks, you need to install a microinverter. In this situation, you can choose not to connect the Output Switch. Using the App NOTE: * Before using the 0W Output Switch, make sure that the Solarbank has been configured. * Update the app version to 2.0.2 or later. Make sure your firmware is also updated to the new version. NOTE: App Log In You can login via your Anker account, Amazon, or Apple ID. If you do not have an Anker account, you can tap [Sign Up] to sign up for an account: · Please prepare an email for the registration process. Passwords must contain 8-20 characters, uppercase and lowercase letters, numbers, and symbols. · Please ensure that the Solarbank has completed its network configuration first. Once the Solarbank has finished configuring, then proceed with the Bluetooth pairing steps with Anker SOLIX Solarbank E1600 0W Output Switch. Find the app device page. Network Configuration Network Configuration Step 1 1. Find the app device page. 2. Tap at the top right corner of the Devices page. 2. Tap at the top right corner of the Devices page. Step 2 : 1. Tap [Accessory]. 2. Press the IoT button for 3s to make sure Anker SOLIX Solarbank E1600 0W Output Switch works normally. Step 3 : Tap [Add Accessory]. Step 4 : Wait for Bluetooth to search. Step 5 : Tap [A17Y0]. Step 6 : Wait for Bluetooth pairing. Step 7 : Your Output Switch has successfully been configured to the network. If the Bluetooth pairing process fails, you can try again. Setting the Output to 0W Step 1 : Tap [Family Load Setting] Step 1 : Tap [Family Load Setting] Step 2 : Set to 0W Specifications Specifications are subject to change without notice. Name Anker SOLIX Solarbank E1600 0W Output Switch Wireless type Bluetooth Input port MC4 Voltage range 18-75V Output port MC4 Temperature -25-65 Dimensions 100×90×47mm Net weight 296g Waterproof rating IP65 Warranty 10 years support@anker.com Customer Service support@anker.com support@anker.com (DE) +49 (800) 0002522Adobe PDF Library 16.0.3 Adobe InDesign 17.0 (Macintosh)