MULTI-FUNCTION
JUMP STARTER
MODEL Epower-177
User Manual
PRODUCT OVERVIEW
- USB 5V/3A 9V/2A 12V/1.5A
- input 5V/3A 9V/2A 12V/1.5A
- DO anti-reverse insertion car start entrance
- USB 5V/3A
- Pressure down
- Pressure up
- LED Switch
- Mode selection
- Power switch Inflatable switch
- LED lights
- Inflatable mouth
PACKAGE CONTENTS
Essential Version
HOW TO USE
Step 1
①Turn on the power ②Plug the jumper cables into the 12V vehicle start port
Step 2
connect the RED clamp to vehicle battery’s positive (+) terminal and BLACK clamp to negative (-) terminal
Step 3
start the vehicle
Step 4
remove jumper clamps
Notice：
- Before starting the car, please make sure that the remaining power of the product is more than 60%
- lf a second start is required, it needs to be started every 30 seconds
- Remove jumper clamps from vehicle battery within 30 seconds on ceengine starts
One machine versatile versatile inflation
HOW TO USE
Connect one end of the inflation line to the air hole
Connect one end of the inflation cable to the tire
Press the power button for 2 seconds to enter the inflation mode (digital flashing)
Select the mode according to 
“+, -” button to adjust the pressure (the host has set the general value, can be default or adjusted)
Press the power button to start to inflate. Press the power button for 2 seconds to shut down or automatically shut down for 30 second
DISPLAY SCREEN DESCRIPTION
- Battery power percentage
- Unit switching
- Numerical display
- Charging mode switching
SPECIFICATIONS
| Performance index | Performance index | Specifications |
| Dimensions | L x W x -3 (mm) | 196110*61 |
| Main Parameters | Internal Battery | Lithium Ion |
| type-C Input | 5V/3A 9V/2A 12V/1.5A | |
| Output USB-1 | 5V/3A 9V/2A 12V/1.5A | |
| Output USB-2 | 5V/3A | |
| Working Temperature | 14°F to 140°F | |
| Charging Temperature | 32°F to 113°F | |
| Storage Temperature | -4°F to 122°F |
HOW TO CHARGE Epower-166
- Insert the Type-C charging cable into the Input port of the startup power supply
- Insert the USB port of the charging cable Into the adapter
(Note:AC adapter is not included). - Plug the AC adapter into a power source.
How to use the light?
FAQ
1.Q: How do I turn off Epower-177 ?
A: Press and hold the power button for 3 seconds to turn off the power. Note: The Epower-177 startup power supply is able to detect its own battery status and can take measures to save power, such as entering sleep mode when the battery is very low.
2. Q: When the battery is fully charged, how long can the power be retained in the battery without using the starting power supply Epower-177 ?
A:If placed in storage, the battery can hold about 2 years of charge. However, it is recommended that you charge it every 1 month, because this can extend the overall life of the battery
Q: What is the expected service life of the starting power Epower-177 ?
A:lt could last for around five years if kept in good condition . The battery should support around 500 recharges from 0 to 100%.
Q: Can I charge my phone or tablet with the boot power Epower-177 ?
A:Yes, the boot power Epower-177 includes two standard USB output ports. Just connect any mobile device to one of these two ports and you can charge it. High power charging is required via a USB port cable that supports fast charging. Details on output current and voltage are on page 5.
TOXIC AND HAZARDOUS SUBSTANCES
| TOXIC AND HARMFUL SUBSTANCES | |||||
| Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent Chromium (Cr (Vi)) | Polybrominated Bi phenyls (PBB) | Polybrominated Diphenyl Ethers (PBDE) |
| 0 | 0 | 0 | 0 | 0 | 0 |
Indicate all homogeneous materials’ hazardous substances content are below the MCV limit specified in the Standard 2002/95/EC(RoHs).
TROUBLESHOOTING
If the following operations can not solve your problems, please stop using the device and contact the manufacture with E-mail
| Problem | Solution |
| No response when pressing the power button | The voltage of the Epower-177 is really low and triggers the low power protection to shutdown the device. Plug the wall charger into the Epower-177 to recharge it. |
| Unit fails to jump-start | · Make sure the power switch is in the on position. · Check that jump-starter is full charged. Recharge unit if necessary. · Make sure a proper polarity cable connection has been established. |
| rt fails to power USB power port | · Make sure the USB Charging Port Power Button is in the on position. · Check that Jump-Starter has a full charge. Recharge unit if necessary |
SAFETY INSTRUCTIONS
- Read the user manual carefully before using this device.
- Do not use this device as a car battery.
- Do not use this device as a toy.
- Be careful to use it when there are children around to avoid injury.
- The product only works with 12V battery.
- Use the clamps that come with the device. When the clamp or wire is damaged, stop using it immediately to avoid personal injuries caused by fire or electric shock.
- Do not connect the positive and negative clamps to each other.
- Before starting, make sure there is no rust or foreign matter on the interface. Connect the device with the clamp tightly to make sure the device starts properly.
- Remove the clamps from the car battery within 30 seconds after successfully starting the car. Otherwise, it may cause damage.
- Do not start the device more than three times in a row, and the interval between each start should be at least two minutes otherwise the product will be overheated and damaged.
- Do not use the clamps to power other devices.
- Do not place the device in an environment where the temperature exceeds 140°F
- The device shall be charged at a temperature of 32’F to 113°F
- Do not put the device in water or expose it to rain.
- Do not expose the device to high temperature or fire.
- Do not use the device in explosive environment with flammable liquid, gas or dust
- Make sure that someone around is available to help you when using the device
- Do not wear metal jewelry such as rings, bracelets, and necklaces while using the device
- Disconnect the jump starter and the clamp at the battery clamp plug to reduce the risk of damage to the power plug and power cord.
- Do not use damaged or modified battery packs to avoid the danger of fire, explosion, and injury
- Use the original charger or a charger with the same input terminal as the jumper starter to charge
- Do not charge this device immediately after starting the car.
- Do not start the car while charging the device.
- The battery may leak in extreme cases. Do not touch the leaked liguid directly with your hands or skin.
Rinse immediately with soap and water in case of contact. lf the leaked liguid comes into contact with your eyes, rinse your eves with cold water for at least 10 minutes and seek medical advice immediately. - At the end of the product life, lithium battery should be disposed in accordance with local regulations.
WARNING
This product is for 12-Voltage vehicle (equipment) batteries. lt may be dangerous if used with other types of batteries. Read and understand the safety instructions before using the jump starter. Fail to follow the safety instructions may cause Damage to the jump starter, and may also result in electric shock, explosions, fire, property damage, and personal injury.
FCC statement：
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Thank you for your support of our original Audew products, And eman has upgraded the original products, launched a more efficient jump starter, and enriched the product line by adding car repair and maintenance products. We hope that this brand can bring you a one-stop shopping experience for auto supplies and meet the needs of all users for auto supplies.
Contact Us：andeman@andeman.com
Name：VISHTEC ltd
Add：3 rd floor office 5, Plovdiv 2 Liuben
Karavelov bul, 4002 Bulgaria
Email：compliance@vish-tec.com
Name：CET Product Service Ltd.
Add：Beacon House Stokenchurch Business Park,
Ibstone Rd, Stokenchurch, High Wycombe,
Buckinghamshire, UK
Email: info@cetproduct.com
MADE IN CHINA
Documents / Resources
 |
Andeman Epower-177 Multi Function Jump Starter [pdf] User Manual Epower-177 Multi Function Jump Starter, Epower-177, Multi Function Jump Starter, Jump Starter, Starter |