ỌTỤTỤ ọrụ
Malie STARTER
MODEL Epower-177
Akwụkwọ ntuziaka onye ọrụ
MKWUO NKEVIEW
- USB 5V/3A 9V/2A 12V/1.5A
- input 5V/3A 9V/2A 12V/1.5A
- Mee mmalite ntinye ụgbọ ala mgbochi azụ
- USB 5V/3A
- Nrụgide ala
- Nrụgide
- Ikanam Gbanye
- Nhọrọ ụdị
- Power switch Inflatable switch
- Ọkụ ọkụ LED
- Inflatable mouth
Ọdịnaya ngwugwu
Ụdị dị mkpa
Otu esi eji
Nzọụkwụ 1
①Turn on the power ②Plug the jumper cables into the 12V vehicle start port
Nzọụkwụ 2
jikọọ RED clamp to vehicle battery’s positive (+) terminal and BLACK clamp to negative (-) terminal
Nzọụkwụ 3
malite ụgbọ ala
Nzọụkwụ 4
wepụ jumper clamps
ọkwa:
- Tupu ịmalite ụgbọ ala, biko jide n'aka na ike fọdụrụ nke ngwaahịa ahụ karịrị 60%
- lf a second start is required, it needs to be started every 30 seconds
- Wepu jumper clamps from vehicle battery within 30 seconds on ceengine starts
One machine versatile versatile inflation
Otu esi eji
Jikọọ otu njedebe nke ahịrị onu oriri na oghere ikuku
Jikọọ otu njedebe nke eriri onu oriri na taya
Press the power button for 2 seconds to enter the inflation mode (digital flashing)
Select the mode according to 
“+, -” button to adjust the pressure (the host has set the general value, can be default or adjusted)
Press the power button to start to inflate. Press the power button for 2 seconds to shut down or automatically shut down for 30 second
Ngosipụta nkọwa ihuenyo
- Pasent ike batrịtage
- Ịgbanwe otu
- Ngosipụta ọnụọgụgụ
- Charging mode switching
Nkọwapụta
| Ndekọ arụmọrụ | Ndekọ arụmọrụ | Nkọwapụta |
| Akụkụ | L x W x -3 (mm) | 196110*61 |
| Isi Parameters | Batrị dị n'ime | Lithium ion |
| ụdị-C ntinye | 5V/3A 9V/2A 12V/1.5A | |
| Mbupute USB-1 | 5V/3A 9V/2A 12V/1.5A | |
| Mbupute USB-2 | 5V/3A | |
| Okpomọkụ na-arụ ọrụ | 14°F ruo 140°F | |
| Nchaji okpomọkụ | 32°F ruo 113°F | |
| Okpomọkụ nchekwa | -4°F ruo 122°F |
HOW TO CHARGE Epower-166
- Insert the Type-C charging cable into the Input port of the startup power supply
- Insert the USB port of the charging cable Into the adapter
(Note:AC adapter is not included). - Tinye nkwụnye AC n'ime isi iyi ike.
Kedu ka esi eji ọkụ?
FAQ
1.Q: How do I turn off Epower-177 ?
A: Press and hold the power button for 3 seconds to turn off the power. Note: The Epower-177 startup power supply is able to detect its own battery status and can take measures to save power, such as entering sleep mode when the battery is very low.
2. Q: When the battery is fully charged, how long can the power be retained in the battery without using the starting power supply Epower-177 ?
A: Ọ bụrụ na etinye ya na nchekwa, batrị nwere ike ijide ihe dị ka afọ 2 chajị. Otú ọ dị, a na-atụ aro ka ị na-ana ya kwa ọnwa 1, n'ihi na nke a nwere ike ịgbatị ndụ batrị dum
Q: What is the expected service life of the starting power Epower-177 ?
A: lt nwere ike ịdịru ihe dị ka afọ ise ma ọ bụrụ na edobere ya n'ọnọdụ dị mma. Batrị kwesịrị ịkwado ihe dị ka chaja 500 site na 0 ruo 100%.
Q: Can I charge my phone or tablet with the boot power Epower-177 ?
A:Yes, the boot power Epower-177 includes two standard USB output ports. Just connect any mobile device to one of these two ports and you can charge it. High power charging is required via a USB port cable that supports fast charging. Details on output current and voltage nọ na ibe 5.
Nsí na ihe dị ize ndụ
| XB ANDRX ỌR HAR NA-emerụ Ahụ | |||||
| Ndu (Pb) | Ebere (Hg) | Ogwugwu (Cd) | Chromium Hexavalent (Cr (Vi)) | Polybrominated Bi phenyls (PBB) | Polyhenminated Diphenyl Ethers (PBDE) |
| 0 | 0 | 0 | 0 | 0 | 0 |
Gosipụta ọdịnaya niile dị ize ndụ dị n'okpuru oke MCV akọwapụtara na Standard 2002/95/EC(RoHs).
Nchọpụta nsogbu
Ọ bụrụ na arụmọrụ ndị a enweghị ike idozi nsogbu gị, biko kwụsị iji ngwaọrụ ahụ wee kpọtụrụ ndị nrụpụta site na email
| Nsogbu | Ngwọta |
| Enweghị nzaghachi mgbe ịpị bọtịnụ ike | Voltage of the Epower-177 is really low and triggers the low power protection to shutdown the device. Plug the wall charger into the Epower-177 to recharge it. |
| Nkeji adabaghị ima elu-mmalite | · Make sure the power switch is in the on position. · Check that jump-starter is full charged. Recharge unit if necessary. · Make sure a proper polarity cable connection has been established. |
| rt fails to power USB power port | · Make sure the USB Charging Port Power Button is in the on position. · Check that Jump-Starter has a full charge. Recharge unit if necessary |
Ntuziaka nchekwa
- Gụọ akwụkwọ ntuziaka onye ọrụ nke ọma tupu i jiri ngwaọrụ a.
- Ejila ngwaọrụ a dị ka batrị ụgbọ ala.
- Ejila ngwaọrụ a ka ihe egwuregwu ụmụaka.
- Kpachara anya ka ị na-eji ya mgbe ụmụaka nọ n'akụkụ iji zere mmerụ ahụ.
- Ngwaahịa a na-arụ ọrụ naanị na batrị 12V.
- Jiri clamps na-abịa na ngwaọrụ. Mgbe clamp ma ọ bụ waya mebiri emebi, kwụsị iji ya ozugbo iji zere mmerụ ahụ nke ọkụ ma ọ bụ ọkụ eletrik kpatara.
- Ejikọtala ihe dị mma na nke na-adịghị mma clamps onye ọ bụla ọzọ.
- Tupu ịmalite, jide n'aka na ọ dịghị nchara ma ọ bụ ihe mba ọzọ na interface ahụ. Jikọọ ngwaọrụ na clamp jisie ike hụ na ngwaọrụ amalitere nke ọma.
- Wepu clamps site na batrị ụgbọ ala n'ime 30 sekọnd mgbe ịmalite ụgbọ ala nke ọma. Ma ọ bụghị ya, ọ nwere ike ịkpata mmebi.
- Amalitela ngwaọrụ ahụ ihe karịrị ugboro atọ n'usoro, na oge dị n'etiti mmalite ọ bụla kwesịrị ịbụ ma ọ dịkarịa ala nkeji abụọ ma ọ bụghị na ngwaahịa ahụ ga-ekpo ọkụ ma mebie ya.
- Ejila clamps ka ike ngwaọrụ ndị ọzọ.
- Edokwala ngwaọrụ na gburugburu ebe okpomọkụ karịrị 140°F
- A ga-anarịrị ngwaọrụ ahụ na okpomọkụ nke 32'F ruo 113°F
- Etinyela ngwaọrụ ahụ na mmiri ma ọ bụ kpughee ya na mmiri ozuzo.
- Ewepụla ngwaọrụ ahụ na oke okpomọkụ ma ọ bụ ọkụ.
- Ejila ngwaọrụ ahụ na gburugburu mgbawa nwere mmiri mmiri, gas ma ọ bụ uzuzu ọkụ
- Gbaa mbọ hụ na onye nọ nso dị inyere gị aka mgbe ị na-eji ngwaọrụ ahụ
- Ejila ọla ọla dị ka mgbanaka, ọla aka na olu mgbe ị na-eji ngwaọrụ ahụ
- Kwupu ihe mmalite na-awụli elu na clamp na batrị clamp nkwụnye iji belata ihe ize ndụ nke imebi plọg ọkụ na eriri ọkụ.
- Ejila ngwugwu batrị mebiri emebi ma ọ bụ gbanwee ka ịzenarị ihe egwu nke ọkụ, mgbawa, na mmerụ ahụ
- Jiri chaja mbụ ma ọ bụ chaja nwere otu ntinye ntinye dị ka onye na-ebido jumper na-akwụ ụgwọ
- Edoghachila ngwaọrụ a ozugbo ịmalite ụgbọ ala.
- Amalitela ụgbọ ala mgbe ị na-ana ngwaọrụ.
- Batrị ahụ nwere ike ịwụpụ n'ọnọdụ dị oke egwu. Ejikwala aka gị ma ọ bụ akpụkpọ gị emetụ liguid ahụ gbapụrụ agbapụ ozugbo.
Rinse immediately with soap and water in case of contact. lf the leaked liguid comes into contact with your eyes, rinse your eves with cold water for at least 10 minutes and seek medical advice immediately. - Na njedebe nke ndụ ngwaahịa, a ga-atụfu batrị lithium dịka iwu mpaghara siri dị.
Ịdọ aka ná ntị
Ngwaahịa a bụ maka 12-Voltage vehicle (equipment) batteries. lt may be dangerous if used with other types of batteries. Read and understand the safety instructions before using the jump starter. Fail to follow the safety instructions may cause Damage to the jump starter, and may also result in electric shock, explosions, fire, property damage, and personal injury.
Nkwupụta FCC:
Ngwaọrụ a na-akwado akụkụ 15 nke Iwu FCC. Ọrụ dị n'okpuru ọnọdụ abụọ ndị a: (1) Ngwaọrụ a nwere ike ọ gaghị ebute nnyonye anya na-emerụ ahụ, yana (2) ngwaọrụ a ga-anabatarịrị nnyonye anya ọ bụla enwetara, gụnyere nnyonye anya nwere ike bute ọrụ na-achọghị.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
Ọ bụrụ na akụrụngwa a na-ebute nnyonye anya na-emerụ ahụ na nnabata redio ma ọ bụ telivishọn, nke enwere ike ikpebi site na ịgbanyụ ma gbanye akụrụngwa, a na-agba onye ọrụ ume ka ọ nwaa idozi nnyonye anya site na otu ma ọ bụ karịa n'ime usoro ndị a:
- Megharịa ma ọ bụ bugharịa antenna nnata.
- Mee ka nkewa dị n'etiti akụrụngwa na nnata.
- Jikọọ akụrụngwa n'ime oghere na sekit dị iche na nke ejikọrọ onye nnata.
- Kpọtụrụ onye na-ere ahịa ma ọ bụ onye ọrụ redio/TV nwere ahụmahụ maka enyemaka.
Thank you for your support of our original Audew products, And eman has upgraded the original products, launched a more efficient jump starter, and enriched the product line by adding car repair and maintenance products. We hope that this brand can bring you a one-stop shopping experience for auto supplies and meet the needs of all users for auto supplies.
Kpọtụrụ anyị:andeman@andeman.com
Aha: VISHTEC Ltd
Tinye: 3rd ụlọ ọrụ 5, Plovdiv 2 Liuben
Karavelov bul, 4002 Bulgaria
Email:compliance@vish-tec.com
Name：CET Product Service Ltd.
Add：Beacon House Stokenchurch Business Park,
Ibstone Rd, Stokenchurch, High Wycombe,
Buckinghamshire, UK
Email: info@cetproduct.com
EMEBERE NA CHINA
Akwụkwọ / akụrụngwa
 |
Andeman Epower-177 Multi Function Jump Starter [pdf] Akwụkwọ ntuziaka onye ọrụ Ike-177 Multi Function Jump Starter, Ike-177, Multi Function Jump Starter, Jump Starter, Starter |