ALLEGION VON DUPRIN Rim Panic Exit
Device Installation Guide

ALLEGION VON DUPRIN Rim Panic Exit Device Installation Guide

ALLEGION VON DUPRIN Rim Panic Exit Device - Componants

OVERVIEW AND DOOR PREPARATION

98/9950WDC

Instead of traditional rods, concealed vertical cables are utilized, making use of a proven technology that enables quick installation and allows for easy maintenance. Simplified sizing, ease of adjustment and greater door integrity make the Wood Door Concealed exit device a more secure solution, without the complexity associated with traditional concealed systems. Another key benefit of the system is the ability to make adjustments to the system by simply removing the scalp plate from the edge of the door.

If you have any questions or comments please visit the resources below or give us a call so we can help get you on your way. Thank you for your continued support of Von Duprin.

Technical Support hot line: 877-671-7011

Scan this QR code or visit us online at kc.allegion.com to access the Allegion Knowledge Center.

ALLEGION VON DUPRIN Rim Panic Exit Device - QR Code

Need a reader for your phone?
For iPhone: QR Reader
For Android: QR Barcode Scanner

ALLEGION VON DUPRIN Rim Panic Exit Device - DOOR PREPARATION 1

FIRE BARRIER

ALLEGION VON DUPRIN Rim Panic Exit Device - FIRE BARRIER ALLEGION VON DUPRIN Rim Panic Exit Device - FIRE BARRIER KNOCKOUT TABLE

LATCH INSTALLATION

ALLEGION VON DUPRIN Rim Panic Exit Device - LATCH INSTALLATION

CABLE INSTALLATION

ALLEGION VON DUPRIN Rim Panic Exit Device - CABLE INSTALLATION

DEVICE INSTALLATION

ALLEGION VON DUPRIN Rim Panic Exit Device - DEVICE INSTALLATION 1 ALLEGION VON DUPRIN Rim Panic Exit Device - DEVICE INSTALLATION 2

DEVICE ADJUSTMENT

ALLEGION VON DUPRIN Rim Panic Exit Device - ADJUSTMENT COMPONENTS

ALLEGION VON DUPRIN Rim Panic Exit Device - DEVICE ADJUSTMENT

STRIKES AND FIRE PIN

ALLEGION VON DUPRIN Rim Panic Exit Device - STRIKES AND FIRE PIN 1 ALLEGION VON DUPRIN Rim Panic Exit Device - STRIKES AND FIRE PIN 2

BOTTOM LATCHBOLT CLEARANCE

ALLEGION VON DUPRIN Rim Panic Exit Device - BOTTOM LATCHBOLT CLEARANCE

TOP STRIKE AND COVERS

ALLEGION VON DUPRIN Rim Panic Exit Device - TOP STRIKE AND COVERS

TROUBLESHOOTING

If latches do not retract when pushpad is depressed:

Remove cover plate from edge of door

  • Pull down on top spool screw. If the top latch fails to actuate, readjust top spool (Steps 4d-1 thru 4d-4).
  • Pull up on bottom spool screw. If the bottom latch fails to actuate, readjust bottom latch clearance (Steps 8b-1 thru 8b-4).
  • If both actuate and the door is not functioning, proceed to next steps.

Remove center case cover

  • Reset automatic adjusting fingers by pressing lift finger upward to preload spring (a).
  • While lift finger is being pressed, tighten locking screw. (b)
  • Repeat adjustment (Step 6).

ALLEGION VON DUPRIN Rim Panic Exit Device - Remove center case cover

If bottom bolt does not stay up while door is open:

  • Confirm mounting screw is securing center slide to face of door (Step 5g).
  • Confirm top latch is sufficiently shimmed (Step 7b).
  • Turn top spool screw in Step 4d-2 one click (¹⁄₄ turn) counterclockwise (CCW).

Customer Service
1-877-671-7011
www.allegion.com/us

ALLEGION logo

© Allegion 2019
Printed in U.S.A.
24739468 Rev. 08/19-f

Documents / Resources

ALLEGION VON DUPRIN Rim Panic Exit Device [pdf] Installation Guide
VON DUPRIN, Rim Panic Exit Device

References

Leave a comment

Your email address will not be published. Required fields are marked *