AeroCool ARGB_V2 Designer V1 Black Mid Tower Case
Front 1/0 Cable Connection
Front 1/0 Connectors
(Please refer to the motherboard’s manual for further instructions).
Note: Specifications may vary depending on your region. Contact your local retailer for more information.
Accessory Bag Contents
How to Install
Hold LED control button for 3 sec to swich between the motherboard and button control Hold LED control button for 6 secs to turn off LED and press once to turn it back on
Note :
Specifications may vary depending on your region Contact your local retailer for more information. To learn more about how to connect your ARGB, please visit the product page at aerocool.io
For ARGB Version (RGB Fan Hub)
Connection Set Up User Guide
For ASUS Aura Sync, MSI Mystic Light Sync, and GIGABYTE
RGB Fusion Motherboards
- Connect (A) to the motherboard’s PWM socket
- Connect (B) to the motherboard’s Addressable RGB socket
- Connect (C) to the PSU’s SATA connector
For Non-Addressable RGB Motherboards
- Connect (A) to the motherboard’s PWM socket
- Connect the 2-pin LED button connector (E) with your hub.
- Connect (C) to the PSU’s SATA connector
Use the RGB fan connectors (F) to connect the Addressable RGB fans with your hub.
Documents / Resources
 |
AeroCool ARGB_V2 Designer V1 Black Mid Tower Case [pdf] Installation Guide ARGB_V2, ARGB_V2 Designer V1 Black Mid Tower Case, Designer V1 Black Mid Tower Case, Black Mid Tower Case, Mid Tower Case, Tower Case, Case |