1. Product Overview
This Outsunny three-tier plastic greenhouse is designed to provide a protected environment for plants, flowers, and more. Its lean-to design allows it to be placed against a wall, making it suitable for both indoor and outdoor use. The reinforced PE cover offers protection from environmental elements while ensuring adequate sunlight for plant growth. Two roll-up zipped doors provide convenient access and facilitate ventilation.
2. Setup & Assembly
Assembly of this mini greenhouse is straightforward, with 1-2 people recommended for efficient setup.
2.1 Components
Before starting, ensure all components are present and undamaged. Refer to the packaging list for a complete inventory.
2.2 Assembly Steps
- Frame Assembly: Connect the steel frame components according to the provided diagrams. Ensure all connections are secure.
- Shelf Installation: Place the six wire shelves onto the designated tiers within the frame. Each shelf is designed to hold up to 15kg.
- Cover Placement: Drape the PE cover over the assembled frame. Ensure the cover is properly aligned and the hemmed edging is positioned correctly.
- Positioning: Place the greenhouse in its desired location. It features a lean-to-wall design and must be propped against a wall or sturdy structure for stability.
- Securing the Base: The cover includes an overlong edging (10cm width). For optimal seal and stability, bury this 10cm extended edge deep into the soil if placed outdoors. This helps prevent wind from lifting the greenhouse and provides better insulation.
3. Operating Instructions
3.1 Plant Protection
The PE cover is designed to offer heat preservation, protecting your plants from cold weather and acting as a bird-proof barrier. It allows sufficient sunlight to penetrate, creating an ideal growing environment.
3.2 Access and Ventilation
The two roll-up doors provide easy access to your plants for watering, pruning, and general care. These doors can also be rolled up and secured to allow for good ventilation, which is crucial for preventing excessive humidity and promoting air circulation within the greenhouse.
4. Maintenance
4.1 Cleaning
Regularly clean the PE cover with a soft cloth and mild soapy water to ensure maximum light transmission. Avoid abrasive cleaners or brushes that could damage the material.
4.2 Inspection
Periodically inspect the PE cover for any signs of wear, tear, or damage. The cover features reinforced hemming to prevent tearing, but prompt repair of any small holes can extend its lifespan. Check the steel frame for rust or loose connections and tighten as necessary.
4.3 Stability
Ensure the greenhouse remains stable by regularly checking its lean-to position against a wall and verifying that the buried edging is still secure, especially after strong winds or heavy rain.
5. Troubleshooting
5.1 Instability
If the greenhouse feels unstable, ensure it is properly propped against a sturdy wall or structure. Verify that the 10cm extended edging of the cover is buried deep into the soil to provide a secure base.
5.2 Poor Ventilation / High Humidity
If you notice excessive humidity or poor air circulation, ensure the roll-up doors are opened sufficiently to allow fresh air to enter and stale air to escape. Adjust the opening based on external weather conditions and plant needs.
5.3 Insufficient Light
Ensure the PE cover is clean and free from dirt or debris that might block sunlight. Reposition the greenhouse if necessary to maximize sun exposure throughout the day.
6. Specifications
| Feature | Specification |
|---|---|
| Model Number | 84H-065V00GN |
| Colour | Green |
| Material | Steel, PE |
| Overall Dimension (L x W x H) | 143cm x 46cm x 141/151cm |
| Door Dimension (W x H) | 51cm x 135cm |
| Wire Shelf Dimension (L x W x H) | 58cm x 46.5cm x 45cm (approximate tier height) |
| Edging Width | 10cm |
| Each Shelf Weight Capacity | 15kg |
| Assembly Recommendation | 1-2 people |
7. User Tips
- Watering: Monitor soil moisture regularly. The greenhouse environment can reduce evaporation, so adjust watering frequency accordingly.
- Temperature Control: Use the roll-up doors to regulate internal temperature. Open them on warm days to prevent overheating and close them at night or on cold days to retain heat.
- Plant Placement: Place taller plants on the lower shelves and shorter plants or seedlings on higher shelves to ensure all plants receive adequate light.
- Pest Management: Regularly inspect plants for pests. The enclosed environment can sometimes encourage certain pests, so early detection is key.
8. Warranty & Support
For any questions regarding assembly, operation, or maintenance of your Outsunny Mini Greenhouse, please contact the retailer or manufacturer's customer support. Keep your purchase receipt as proof of purchase for any warranty claims.
