Outsunny Lean-to Greenhouse

Model Numbers: 84H-228V00, 84H-228V01

Estimated Assembly Time: 2 Hours

Total Steps: 7

Parts List

Please verify all parts are present before assembly.

Part 1: Metal Tube (68.5 cm) - Quantity: 30
Part 2: Metal Tube (54.5 cm) - Quantity: 4
Part 3: Metal Tube (44.5 cm) - Quantity: 20
Part 4: Metal Tube (43 cm) - Quantity: 4
Part 5: Metal Tube (42 cm) - Quantity: 12
Part 6: Shelf Grid - Quantity: 9
Part A: 3-way Connector - Quantity: 4
Part D: 3-way Connector - Quantity: 12
Part E: 4-way Connector - Quantity: 8
Part G: 3-way Connector (75°) - Quantity: 2
Part H: 3-way Connector (105°) - Quantity: 2
Part I: 3-way Connector (75°) - Quantity: 2
Part J: 3-way Connector (105°) - Quantity: 2
Part M: Tube Clip/Fastener - Quantity: 12
Part N: Shelf Clip/Fastener - Quantity: 18
Part Z: Tie-down Strap/Cover Securer - Quantity: 1

Assembly Instructions

Step 1: Base Frame Assembly

Assemble the base frame using Part 1 (68.5 cm tubes) and Part 5 (42 cm tubes), connected by Part A and Part D connectors. Ensure the structure is square. This forms the initial rectangular base.

Diagram description: Shows the first layer of the frame being built with horizontal tubes (1, 5) and vertical/corner connectors (A, D). Arrows indicate insertion points.

Step 2: Second Layer Frame Assembly

Continue building the frame upwards. Use Part 1 (68.5 cm tubes) and Part 5 (42 cm tubes) along with Part D and Part E connectors. This step adds the second tier of the frame structure.

Diagram description: Shows the second layer of the frame being added, using similar tubes and connectors (D, E) to extend the structure vertically and horizontally. Arrows indicate assembly direction.

Step 3: Top Frame and Support Assembly

Construct the top section of the frame. Use Part 1 (68.5 cm tubes) and Part 4 (43 cm tubes) connected by Part G (75°), Part H (105°), Part I (75°), and Part J (105°) connectors. This step forms the angled roof structure and connects the vertical supports.

Diagram description: Shows the assembly of the roof structure and upper supports using angled connectors (G, H, I, J) and tubes (1, 4). Arrows indicate connection points.

Step 4: Adding Horizontal Supports

Insert Part 2 (54.5 cm tubes) and Part 3 (44.5 cm tubes) horizontally between the vertical supports at different levels. These provide structural integrity and support for the shelves. Follow the indicated steps (Step 1, Step 2, Step 3) for placement.

Diagram description: Shows the placement of horizontal tubes (2, 3) at various levels within the frame. Arrows indicate where these tubes are inserted. The diagram indicates a sequence of adding these supports.

Step 5: Attaching Shelves

Use Part M (tube clips) to attach the Part 6 (shelf grids) to the frame. Secure each shelf grid in place. The diagram indicates attaching 6 shelves using Part M clips.

Diagram description: Shows the shelf grids (Part 6) being placed onto the frame and secured using clips (Part M). Arrows indicate the direction of attachment. The diagram shows multiple shelves being installed.

Step 6: Securing Shelves

Use Part N (shelf fasteners/clips) to further secure the Part 6 (shelf grids) to the frame. Ensure all shelves are firmly attached. The diagram shows 9 shelves being secured with Part N clips.

Diagram description: Shows the shelf grids (Part 6) being secured to the frame using clips (Part N). Arrows indicate the attachment points for these clips. The diagram illustrates securing all 9 shelves.

Step 7: Final Cover and Securing

Drape the greenhouse cover over the frame. Use the provided Part Z (tie-down straps or cover securers) to fasten the cover securely to the frame, ensuring it is taut and well-fitted. The diagram shows the cover being placed and secured with ties.

Diagram description: Shows the greenhouse cover being placed over the assembled frame. Arrows indicate the cover being pulled down. Close-up views show how to tie or secure the cover using straps (Part Z).

Customer Support and Import Information

If you have any questions or require assistance, please contact the relevant customer care center:

United States (US)

Phone: 001-877-644-9366

Email: customerservice@aosom.com

Imported by: Aosom LLC, 27150 SW Kinsman Rd, Wilsonville, OR 97070 USA. Made in China.

Canada (CA)

Phone: 416-792-6088

Email: customerservice@aosom.ca

Imported by: Aosom Canada Inc., 7270 Woodbine Avenue, Unit 307, Markham, Ontario Canada L3R 4B9. Made in China.

United Kingdom (UK)

Phone: 0044-800-240-4004

Email: enquiries@mhstar.co.uk

Importer Address: MH STAR UK LTD, Unit 27, Perivale Park, Horsenden lane South, Perivale, UB6 7RH. Made in China.

France (FR)

Phone: 0033-1-84166106

Email: aosom@mhfrance.fr

Imported by: MH FRANCE, 2 Rue Maurice Hartmann, 92130 Issy Les Moulineaux, France. Made in China.

Germany (DE)

Phone: 0049-0(40)-87408465

Email: service@aosom.de

Importer/Manufacturer/REP: MH Handel GmbH, Wendenstraße 309, D-20537 Hamburg, Germany. Made in China.

Italy (IT)

Phone: 0039-0249471447

Email: clienti@aosom.it

Imported by: AOSOM Italy srl, Centro Direzionale Milanofiori, Strada 1 Palazzo F1, 20057 Assago (MI). Made in China.

Spain (ES)

Phone: 0034-931294512

Email: atencioncliente@aosom.es

Importer/Manufacturer/REP: SPANISH AOSOM, S.L., C/ROC GROS,N°15.08550, ELS HOSTALETS DE BALENYÀ, SPAIN. Made in China.

Portugal (PT)