Outsunny Raised Planter with Cover
Model: IN231100318V01_GL / 84H-034V00
Assembly Instructions
Estimated Assembly Time: 1 Hour
Estimated Steps: 6
IMPORTANT: RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
NOTE: Do not confuse similar screws. Do not tighten bolts fully until all parts are connected!
Parts
- Part 1: Top Frame Piece x 1
- Part 2: Top Frame Piece x 1
- Part 3: Frame Side Piece x 2
- Part 4: Top Panel x 1
- Part 5: Leg Piece x 1
- Part 6: Leg Piece x 1
- Part 7: Leg Piece x 1
- Part 8: Leg Piece x 1
- Part 9: Lower Shelf/Grid x 1
- Part 10: Curved Support Pole x 2
- Part 11: Curved Support Pole x 2
- Part 12: Protective Cover x 1
- Part 13: Cover Frame x 1
- Part 14: Cover Fastener x 1
- Part 15: Side Panel/Drawer x 1
Hardware
- Hardware 16: Screw M5*10 (+1 spare) x 8
- Hardware 17: Screw M5*20 (+1 spare) x 6
- Hardware 18: Bolt and Nut Assembly x 14 (+1 spare)
- Hardware 19: Allen Key x 1
- Hardware 20: Wrench x 1
Assembly Instructions
Step 1: Assemble the Base Frame
Attach the two side frame pieces (3) to the top frame pieces (1 and 2) using screws (16) and the provided Allen key (19). Ensure the holes align correctly. Then, attach the leg pieces (5, 6, 7, 8) to the frame structure using screws (17) and the Allen key (19). Finally, attach the lower shelf/grid (9) to the leg pieces (7, 8) using screws (17) and the Allen key (19). Do not fully tighten all screws until the entire structure is assembled.
Step 2: Attach Side Panel/Drawer
Attach the side panel/drawer (15) to the main frame assembly using screws (18) and the provided wrench (20). Ensure it is securely fastened.
Step 3: Place Top Panel
Carefully place the top panel (4) onto the assembled frame. It should fit snugly into the top structure.
Step 4: Install Support Poles
Insert the curved support poles (10 and 11) into the designated slots or holes on the top frame. Ensure they are firmly seated.
Step 5: Position Protective Cover
Place the protective cover (13) over the curved support poles (10 and 11) and the frame. Drape it evenly.
Step 6: Secure Cover
Use the cover fastener (14) to secure the protective cover (12) to the frame, ensuring it is taut and properly fitted.
Customer Support
For any questions or assistance, please contact the customer care center for your region. Details are provided below:
United States
Phone: 001-877-644-9366
Email: customerservice@aosom.com
Imported by: Aosom LLC, 27150 SW Kinsman Rd, Wilsonville, OR 97070 USA. Made in China.
Canada
Phone: 416-792-6088
Email: customerservice@aosom.ca
Imported by: Aosom Canada Inc., 7270 Woodbine Avenue, Unit 307, Markham, Ontario Canada L3R 4B9. Made in China.
United Kingdom
Phone: 0044-800-240-4004
Email: enquiries@mhstar.co.uk
Importer Address: MH STAR UK LTD, Unit 27, Perivale Park, Horsenden lane South, Perivale, UB6 7RH. Made in China.
Germany
Phone: 0049-0(40)-87408465
Email: service@aosom.de
Address of Importer/Manufacturer/REP: MH Handel GmbH, Wendenstraße 309, D-20537 Hamburg, Germany. Made in China.
Italy
Phone: 0039-0249471447
Email: clienti@aosom.it
Imported by/Manufacturer/REP: AOSOM Italy srl, Centro Direzionale Milanofiori, Strada 1 Palazzo F1, 20057 Assago (MI). Made in China.
Spain
Phone: 0034-931294512
Email: atencioncliente@aosom.es
Importer/Manufacturer/REP: SPANISH AOSOM, S.L., C/ROC GROS,N°15.08550, ELS HOSTALETS DE BALENYÀ, SPAIN. Made in China.
France
Phone: 0033-1-84166106
Email: aosom@mhfrance.fr
Imported by/Manufacturer/REP: MH FRANCE, 2 Rue Maurice Hartmann, 92130 Issy Les Moulineaux, France. Made in China.
Recycling Information
Please recycle or donate. For relevant addresses, please refer to quefairedemesdechets.fr.
