NORTH EDGE Snow Leopard Men's Sports Digital Watch

1. Introduction

This manual provides detailed instructions for the operation and maintenance of your NORTH EDGE Snow Leopard Sports Digital Watch. Designed for outdoor enthusiasts, this watch combines classic analog hands with a digital display, offering a wide range of features including timekeeping, environmental measurements, and sports functions.

Please read this manual thoroughly to understand all functions and ensure proper use of your watch.

Front view of the NORTH EDGE Snow Leopard watch.

Angled view of the NORTH EDGE Snow Leopard watch.

Back view of the NORTH EDGE Snow Leopard watch, showing engraved details.

2. Key Functions

The watch features four control buttons (A, B, C, D) for navigating modes and settings.

Illustration of the watch with labeled control buttons (A, B, C, D).

• A Key: Start/Stop, Set, Increase value (+)
• B Key: Mode selection
• C Key: Reset, Decrease value (-)
• D Key: Backlight activation

3. Main Features

Your Snow Leopard watch is equipped with the following functions:

Overview of the watch's main functions.

• Time function (12/24H system, hour, minute, second, year, month, day)
• Atmospheric pressure measurement (Barometer)
• Altitude measurement (Altimeter)
• Stopwatch function
• Compass function
• Alarm function
• Thermometer function
• Second time function
• Backlight
• Sleep function

4. Operating Modes

4.1 Mode Switching

Press the B Key to cycle through the different operating modes:

Flowchart illustrating how to switch between watch modes.

4.2 Time Mode

Displays current time, date, and day. In this mode, the analog hands show the time, and the digital display shows additional information.

Example of the Time Mode display.

Time Setting:

• Press and hold A Key for 2 seconds to enter setting state.
• Press B Key to switch between setting items (12/24H, Hour, Minute, Day, Month, Year, Second).
• Press A Key to increase the value of the current setting item. Long press A Key for 2 seconds to rapidly increase the value.
• Press C Key to decrease the value of the current setting item. Long press C Key for 2 seconds to rapidly decrease the value.
• Press D Key to turn on the backlight.

Time Calibration (Analog Hands):

• In Time Mode, press and hold A Key for 5 seconds to enter time calibration state. The hour and minute hands will move to the 12:00 position, and the LCD will display 'SYNC'.
• If hands are not at 12:00, short press A or C Key to adjust them forward or backward.
• To adjust rapidly, press and hold A or C Key for 2 seconds.

4.3 OPT Setting (Unit, Key Tone, Sleep)

This mode allows you to configure various watch options.

Sequence for OPT settings, including unit, key tone, and sleep mode.

• Long press A Key for 2 seconds to enter setting state.
• Press B Key to switch between setting items: Unit Setting (Cm/Fft), Key Tone Setting (On/Off Beep), and Sleep Mode (On/Off).
• If Sleep Mode is enabled, the watch will beep after 10 seconds and enter sleep mode. Press any key to exit if not entering sleep mode.
• In sleep state, press B Key to wake up the watch.

4.4 Barometer Mode

Measures atmospheric pressure.

Watch displaying Barometer function.

• Press C Key to switch between relative and absolute air pressure values.
• To calibrate air pressure, long press A Key for 2 seconds to enter setting state. Use A/C Keys to adjust the value.

4.5 Altimeter Mode

Measures altitude. The watch will automatically measure altitude upon entering this mode.

Watch displaying Altimeter function.

• Height range: -400m to +9000m (-1333ft to +30000ft).
• To calibrate altitude, long press A Key for 2 seconds to enter setting state. Use A/C Keys to adjust the value.

4.6 Stopwatch Mode

Measures elapsed time up to 9 hours, 59 minutes, 59 seconds, and 99 hundredths of a second.

• Press A Key to start/pause the stopwatch.
• While running, press C Key to record a lap time.
• While paused, press C Key to reset the stopwatch.

4.7 Compass Mode

Provides direction positioning and displays angle values.

Watch displaying Compass mode and calibration instructions.

• Upon entering, the watch performs direction positioning.
• Magnetic declination setting range: E90° to W90°.

Compass Correction:

• Long press A Key for 2 seconds to enter correction mode.
• Follow on-screen instructions to perform one-way and two-way calibration by rotating the watch.

4.8 Alarm Mode

Set up to two alarms.

• Press A Key to switch between alarm groups (Alarm 1, Alarm 2).
• Long press A Key for 2 seconds to enter setting state. Use A/C Keys to adjust hour/minute.
• Press C Key to turn the alarm on/off.
• When an alarm sounds, it will last for 10 seconds. Press any key to interrupt it.

4.9 Thermometer Mode

Measures temperature.

• The measured temperature is affected by body temperature. For accurate ambient temperature, remove the watch and place it on a flat surface for at least 20 minutes.

4.10 Backlight

Press the D Key in any mode to activate the backlight for improved visibility in low-light conditions.

Luminous display for clear data visibility at night.

5. Specifications

Detailed specifications for the NORTH EDGE Snow Leopard watch:

Dimensions and key components of the watch.

Note: All dimensions are manual measurements; reasonable nuances may exist. Please take the actual object as the criterion.

Detailed view of watch components.

6. User Tips

• Accurate Temperature Reading: For precise ambient temperature measurements, remove the watch from your wrist and place it on a stable surface for at least 20 minutes to allow it to acclimate to the environment.
• Stopwatch Continuity: If you switch modes while the stopwatch is running without pausing it, the stopwatch will continue to run in the background. It will only reset once it reaches its maximum value (9:59'59"99).
• Automatic Exit from Settings: If there is no button operation for one minute in any setting state, the watch will automatically save the current settings and exit.
• Automatic Return to Time Display: In most modes (except stopwatch running state), if there is no button operation for one minute, the watch will automatically return to the time display screen. In Altimeter mode, this return occurs after 3-4 hours of no key operation.

7. Maintenance

• Cleaning: Wipe the watch regularly with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth and then dry thoroughly. Avoid harsh chemicals or abrasive materials.
• Water Resistance: The watch is water-resistant up to 50 meters (5Bar). This means it is suitable for daily use, such as washing hands, rain, and brief immersion in water. It is NOT suitable for hot water activities, diving, or prolonged underwater use. Do not operate buttons underwater.


The watch is waterproof up to 50M, suitable for daily water exposure.

• Temperature Extremes: Avoid exposing the watch to extreme temperatures (hot or cold) for extended periods, as this can affect battery life and accuracy.
• Impact: While durable, avoid strong impacts or dropping the watch to prevent damage to internal components or the casing.
• Battery Replacement: The watch uses a CR2430 battery. When the battery is low, consult a professional watch repair service for replacement to ensure water resistance is maintained.

8. Troubleshooting

• Display Not Working/Frozen: Try pressing and holding all buttons simultaneously for a few seconds to perform a soft reset. If the issue persists, the battery may need replacement.
• Inaccurate Readings (Altimeter/Barometer/Compass): Ensure you perform regular calibration as described in the respective mode sections. Environmental factors can affect sensor accuracy.
• Analog Hands Not Synchronized: Follow the 'Time Calibration (Analog Hands)' steps in the Time Mode section to re-synchronize the analog hands with the digital time.
• Buttons Unresponsive: Check if the watch is in Sleep Mode. Press the B key to wake it up. If unresponsive in normal operation, the watch may require servicing.

9. Warranty and Support

For warranty information, service, or further assistance, please refer to the official product documentation or contact the seller directly. Keep your proof of purchase for any warranty claims.

A detailed user manual in PDF format is available for download. You can access it by scanning the QR code below or visiting the provided URL:

User Manual (PDF): View User Manual PDF

Scan this QR code to access the electronic manual in multiple languages.

10. Environmental Statement

To reduce paper consumption for environmental reasons, we provide electronic manuals in multiple languages (English, Spanish, French, German, Italian, Polish, Dutch, Swedish, Greek, Portuguese, etc.). These can be downloaded and saved for convenient access at any time. Please use the provided QR code or link to view or download the electronic manuals.