Introduction
The GEARELEC Android 13 Car Radio is a 7-inch 2 DIN multimedia player designed to enhance your in-car entertainment and navigation experience. It features a responsive IPS display, Android 13 operating system, and supports a wide range of functions including CarPlay, Android Auto, Wi-Fi connectivity, GPS navigation, and FM radio. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to help you get the most out of your device.
Setup
Package Contents
Please check the package contents carefully. If any items are missing or damaged, contact your retailer.
- 1x Main Unit
- 1x User Manual
- 1x GPS Antenna
- 2x Special Power Cables
- 1x Canbus Protocol Box
- 2x Disassembly Keys
- 1x 20PIN RCA Wiring Harness
- 1x Reversing Video Input Cable
- 2x USB Extension Cables (4PIN+6PIN)
- 1x FM Radio Adapter Cable
Figure 1: Package Contents
Vehicle Compatibility
This multimedia player is designed to be compatible with the following Opel vehicle models:
- For Astra H 2004-2009
- For Antara 2006-2011
- For Combo 2004-2011
- For Corsa D 2006-2011
- For Meriva 2006-2008
- For Signum 2003-2011
- For Tigra twin top 2004-2011
- For Vectra 2005-2008
- For Vivaro 2006-2010
- For Zafira B 2005-2011
Figure 2: Adaptable Vehicle Dashboards
Incompatible Vehicles: Please note that this unit may not be compatible with vehicles equipped with specific factory head units, such as the 'CD 400 plus' or 'Touch & Connect' systems. Always verify your vehicle's current dashboard configuration before attempting installation.
Figure 3: Incompatible Vehicle Dashboards
Dimensions
Refer to the diagram below for the physical dimensions of the main unit:
- Front Panel Width: 215mm
- Front Panel Height: 120mm
- Rear Unit Width: 178mm
- Rear Unit Height: 100mm
- Rear Unit Depth: 64mm
Figure 4: Unit Dimensions
Installation Guide
Professional installation is highly recommended for this product to ensure correct wiring and functionality. Incorrect installation may damage the unit or your vehicle.
Rear Panel Connections
The rear panel of the unit features various ports for power, audio, video, and data connections. Familiarize yourself with these connections before installation:
Figure 5: Rear Panel Connections
- Power Connector: Located on the left side, this 8-pin connector is for the main power supply.
- Fuse: An inline fuse protects the unit from power surges.
- USB Ports: Two rear USB2.0 ports are provided: a 4-pin for USB flash disk reading (audio/video/picture) and a 6-pin for Android USB recorder reading.
- RCA Connectors: Includes ports for audio input (2-channel L+R), audio output (2-channel L+R), video input (2-channel), subwoofer output (1-channel), and reverse video input (1-channel).
- GPS Antenna Port: Connect the provided GPS antenna here.
- Radio Antenna Port: Connect your vehicle's FM radio antenna.
- CANBUS Connector: Located at the top right, for vehicle communication.
- SWL (Steering Wheel Learning) Wires: For connecting to your vehicle's steering wheel controls.
- External Mic Input: Rear input for an optional external microphone.
Wiring Diagram (Conceptual)
Connect the special power cables and Canbus protocol box according to your vehicle's specific wiring. Ensure all connections are secure to prevent intermittent issues. The GPS antenna should be placed in a location with a clear view of the sky for optimal signal reception. The RCA wiring harness connects to external amplifiers or video displays if used. The reversing video input cable is for an optional rear view camera.
Operating Instructions
Front Panel Controls
The front panel provides easy access to essential functions:
Figure 6: Front Panel Controls
- Left Knob: Press to turn the screen off/mute audio. Rotate to adjust volume.
- MUTE Button: Mutes/unmutes audio.
- NAVI Button: Quick access to navigation applications.
- SRC Button: Switches between different audio/video sources (e.g., Radio, USB, Bluetooth).
- MIC: Built-in microphone.
- Right Knob: Rotate to scan radio stations or navigate through tracks. Press to pause/play media or select.
- RADIO Button: Direct access to the radio function.
- BAND Button: Switches between radio bands (e.g., FM1, FM2).
- DISP Button: Controls display settings or information.
- RST (Reset Hole): Use a thin object to press and reset the unit.
Radio (FM/RDS)
The unit supports FM radio with a frequency range of 87.5~108.0MHz. The RDS (Radio Data System) function allows for real-time reception of traffic information and station data where available. Use the 'RADIO' button to access the radio interface and the 'BAND' button to switch radio modes. The right knob can be used for station scanning.
Figure 7: FM Radio Interface
Bluetooth Function
Connect your smartphone via Bluetooth 5.1 (Default Name: SWL-BT) for hands-free calling, phone book access, and wireless music streaming. To pair, enable Bluetooth on your phone and search for 'SWL-BT'.
Figure 8: Bluetooth Functionality
GPS Navigation
The built-in GPS supports multiple navigation applications and is compatible with BeiDou, GPS, and GLONASS satellite systems, providing accurate positioning and routing.
Figure 9: GPS Navigation
Wi-Fi Connection
Connect to a Wi-Fi network (2.4GHz/5GHz) to access online content, stream videos, browse news, and use various internet-enabled applications directly on your car radio.
Figure 10: Wi-Fi Connection
CarPlay & Android Auto
The unit supports both wired and wireless CarPlay and Android Auto. Connect your smartphone to seamlessly integrate its features, including navigation, music, messages, and voice control. For wired connections, use the 4P USB interface.
Figure 11: CarPlay & Android Auto Functionality
Screen Mirroring
Mirror your Android or iOS smartphone screen to the car stereo display, allowing you to view videos, use navigation apps, and access other content directly from your phone.
Figure 12: Screen Mirroring
USB Media Playback
Play audio, video, and picture files directly from a USB flash drive connected to the rear 4-pin USB2.0 port.
Figure 13: USB Media Playback
Rear View Camera Function
The unit supports reversing video input (AHD720P/1080P, CVBS 480P). Connect an optional rear view camera to automatically display the rear view when reversing, enhancing safety.
Figure 14: Rear View Function
Steering Wheel Control
The unit supports learning functions for original steering wheel controls. You can map your vehicle's steering wheel buttons to control various functions of the car player for convenience and safety.
Figure 15: Steering Wheel Control Learning
UI Theme Customization
Personalize your user experience with 25 built-in free UI themes. Navigate to the settings menu to select your preferred interface style.
Figure 16: UI Theme Switching
DSP Digital Sound Effects
Experience outstanding high-fidelity audio with the professional DSP (Digital Sound Processor). Customize your sound with the built-in equalizer for immersive stereo surround sound.
Figure 17: DSP Digital Sound Effects
Maintenance
To ensure the longevity and optimal performance of your GEARELEC car radio, follow these maintenance guidelines:
- Cleaning: Use a soft, dry, lint-free cloth to clean the screen and the unit's exterior. Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the display and finish.
- Software Updates: Periodically check for available software updates through the system settings. Keeping your software up-to-date can improve performance, add new features, and resolve potential issues.
- Environmental Conditions: Avoid exposing the unit to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
Troubleshooting
If you encounter any issues with your car radio, refer to the following common problems and solutions:
- No Power:
- Check all power cable connections to ensure they are secure.
- Verify that the vehicle's ignition is on.
- Inspect the fuse on the power cable for any damage; replace if necessary.
- No Sound:
- Ensure speaker connections are correct and secure.
- Check that the volume is not muted or set too low.
- Verify audio output settings in the system menu.
- GPS Signal Issues:
- Ensure the GPS antenna is properly installed and has a clear, unobstructed view of the sky.
- Check GPS settings within the unit's system.
- Bluetooth Connection Problems:
- Confirm Bluetooth is enabled on both the car radio and your mobile device.
- Delete any previous pairings and attempt to re-pair the devices.
- Ensure your devices are within close proximity.
- Touch Screen Unresponsive:
- Press the 'RST' (Reset) hole with a thin, non-metallic object to restart the unit.
- If the issue persists, a factory reset may be required (Factory-set Password: 000000).
- CarPlay/Android Auto Not Connecting:
- Ensure your smartphone's operating system is up to date.
- Try both wired and wireless connection methods.
- For wired connections, confirm you are using the correct 4P USB interface.
- Check your phone's settings for CarPlay/Android Auto permissions.
- Steering Wheel Controls Not Working:
- Re-perform the button learning process in the system settings.
- Ensure the Canbus protocol box is correctly installed and configured for your specific vehicle model.
Specifications
Detailed technical specifications for the GEARELEC Android 13 Car Radio:
| Feature | Specification |
|---|---|
| Built-in DVD Player | No |
| Built-in CD player | No |
| Chipset | MT 8163 |
| Processor Speed | / |
| Is touch screen | Yes |
| Built-in Screen | Yes |
| TF/Micro SD Slot | 2 |
| Din | Double Din |
| RAM | 2 G |
| Operating System | Android 13 |
| Out Power | 60Wx4 |
| Voltage | 12 V |
| Item Weight | 1.3kg |
| Item Size | 7 inch |
| Output Type | Colored |
| Special Features | Built-In Speaker/Microphone, wifi function, Support Can-Bus, Built-in GPS, Charger, Mobile Phone, MP3 players, CarPlay, android auto, Reversing Input, Split Screen, Support steering wheel control |
| Digital Media Format | Mp3, MP4, WMA, JPEG |
| OSD Language | Chinese (Simplified), Chinese (Traditional), Arabic, Polish, Danish, German, Russian, French, Korean, Dutch, Czech, Latin, Japanese, THAI, Greek, Spanish, Hungarian, Italian, Indonesia, English |
| Resolution | 1024x600 |
| Display Size | 7" |
| Brand Name | gearelec |
| For Vehicle Brands/Model | Opel |
| Accessory Type | canbus |
| Certification | CE |
| Origin | Mainland China |
| Material | ABS |
| Radio Frequency | FM 87.5~108.0MHz |
| Radio chip | 6625 |
| Amplifier chip | YD7388 |
| Working temperature | -10~60 ℃ |
| Bluetooth Version | 5.1 Version |
| Wi-Fi Frequency | 2.4GHz/5GHz |
| GPS Signal | BeiDou /GPS/GLONASS |
| Panel Lighting | Colorful lights |
| Reversing video support | AHD720P/1080P, CVBS 480P (camera optional) |
| USB Interface | Rear USB2.0*2 (4 PIN for USB flash disk, 6 PIN for Android USB recorder) |
| Video output | Not supported |
| Audio output | 2 channel (left + right) |
| Audio input | 2 channel (left + right) |
| Video input | 2 channel |
| Subwoofer output | 1 channel |
| External Mic Input | Rear Input (External Mic Optional) |
User Tips
Here are some tips to enhance your experience with the GEARELEC Android 13 Car Radio:
- Customize UI: Explore the 25 built-in UI themes to personalize your display and match your vehicle's interior or your personal preference.
- Steering Wheel Learning: Take the time to properly configure your steering wheel controls. This allows for safer and more convenient operation, keeping your hands on the wheel.
- External Microphone: For optimal call quality and voice command accuracy, especially in noisy environments, consider installing an optional external microphone.
- USB Port Usage: Remember that the 4-pin USB port is primarily for general media playback from a flash drive, while the 6-pin USB port is specifically designed for Android USB recorders.
- Factory Reset Password: Keep the factory-set password (000000) in mind for troubleshooting or resetting the unit to its default settings if needed.
Warranty and Support
This GEARELEC product is covered by a manufacturer's warranty. For specific warranty terms, technical assistance, or customer support, please contact your original point of purchase or refer to the official GEARELEC support channels. Please retain your purchase receipt as proof of purchase for any warranty claims.
