1. Introduction
Thank you for choosing the Baseus PrimeTrip VC2 Pro Cooling Magnetic Wireless Charging Car Mount. This innovative device combines a secure car phone holder with a powerful 25W wireless charger, featuring advanced cooling technology to ensure efficient and stable charging on the go. Its ultra-thin design and strong magnetic hold provide a seamless and reliable experience for your smartphone.
2. Package Contents
Please check the package for the following items:
- Baseus PrimeTrip VC2 Pro Car Mount with Wireless Charger
- USB-C Charging Cable
- Magnetic Ring (for non-magnetic phones/cases)
- Wet Wipes
- User Manual (this document)
3. Specifications
| Feature | Detail |
|---|---|
| Product Name | Baseus PrimeTrip VC2 Pro Cooling Magnetic Wireless Charging Car Mount Qi2.2 Air Vent Version |
| Model No. | C0013N |
| Color | Cosmic Black |
| Material | PC + ABS + Silicone |
| Net Weight | About 126g (Without packaging) |
| Input | 5V=3A, 9V=3A, 15V=3A Max |
| Output | 5W / 7.5W / 10W / 15W / 25W |
| Installation Type | Vent Installation |
| Special Features | Lightweight, Adjustable, Ergonomics, One-handed operation, Wireless Charging, Built-in PC-Level Cooling Fan |
| Dimensions | 112mm (Height) x 65mm (Width) x 12mm (Thickness) |
Note: The above parameters are measured manually. It is normal for errors of 3-5mm to occur.
4. Setup Instructions
Follow these steps to install your car mount:
- Assemble the Mount: Loosen the knob on the vent clip, then press the ball head of the charger into the ball head slot on the clip.
- Adjust Angle: Adjust the bracket angle to your preferred viewing position (straight-on is recommended for optimal visibility). Tighten the knob securely to fix the angle.
- Attach to Air Vent: Select a suitable position on your car's air vent. Hook the tail clip onto an air vent blade. Tighten the knob until the bracket is firmly secured and does not shake. Avoid using excessive force to prevent damage to the air vent.
- Connect Power: Connect the provided USB-C charging cable to the car mount and a suitable car charger (not included).
The mount supports both vertical and horizontal air vents.
5. Operating Instructions
5.1 Charging Your Device
- Attach Phone: After connecting the car mount to power, simply attach your compatible smartphone to the magnetic charging surface. Charging will begin automatically.
- Basic Mode (Default): The charger operates in Basic Mode by default, providing efficient cooling to maintain stable charging performance.
- Switch to Ultra Mode: Press the button on the side of the charger to switch to Ultra Mode. In this mode, the charging efficiency is optimized for the best-in-class level.
5.2 Phone Compatibility
- Direct Use: Compatible with iPhone 12-17 and newer models that feature built-in magnetic alignment.
- With Magnetic Ring: For iPhone 11 and older models, or Android phones, a magnetic ring must be used for secure attachment and wireless charging.
Note: iPhone models need to be updated to iOS 26 or later to achieve the peak 25W wireless charging power.
5.3 Adjusting Viewing Angle
The car mount features a 360-degree rotatable ball head, allowing you to flexibly adjust your phone to any desired angle, whether landscape or portrait, for optimal driving view.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the surface of the charger and mount. Do not use abrasive cleaners or solvents.
- Storage: Store the device in a cool, dry place when not in use.
- Avoid Damage: Do not drop, disassemble, or attempt to repair the device yourself. This may void the warranty and cause damage.
- Temperature: Avoid exposing the device to extreme temperatures, direct sunlight, or high humidity.
7. Troubleshooting
- Device Not Charging:
- Ensure the USB-C cable is securely connected to both the car mount and a functioning car charger.
- Verify that your car's power outlet is active.
- Check if your phone is properly aligned on the magnetic charging surface.
- If using a magnetic ring, ensure it is correctly positioned on your phone or case.
- Confirm your phone supports wireless charging.
- Weak Magnetic Hold:
- Ensure your phone or case is compatible with magnetic attachment.
- If using a phone case, it may weaken the magnetic hold. It is recommended to stick the magnetic ring directly onto the surface of the phone case for best performance.
- Clean the magnetic surface of the charger and your phone/ring to remove any dust or debris.
- Overheating During Charging:
- The device has a built-in cooling fan. Ensure the air vents on the charger are not obstructed.
- If charging in direct sunlight or a very hot environment, move to a cooler location if possible.
- Ensure you are using a compatible power adapter.
- Mount is Loose in Air Vent:
- Re-tighten the knob on the vent clip to ensure a secure fit.
- Ensure the tail clip is properly hooked onto an air vent blade.
8. User Tips
- For optimal 25W wireless charging with iPhones, ensure your device's iOS is updated to version 26 or later.
- If your phone (iPhone 11 or older, or Android) does not have built-in magnetic capabilities, use the provided magnetic ring for secure attachment and charging. For best results, attach the magnetic ring directly to your phone case.
- The built-in cooling fan and 3D air cooling ducts are designed to maintain stable charging performance and prevent overheating, even during long drives or high-power charging.
- The anti-fall tail clip and support pad are engineered to keep your phone stable and secure, minimizing shaking and noise on bumpy roads.
9. Warranty and Support
Baseus products are manufactured to the highest quality standards. For any issues or support needs, please contact your retailer or visit the official Baseus website for assistance. Keep your purchase receipt as proof of purchase for warranty claims.
