1. Introduction
The DREAME C1 Intelligent Window Cleaning Robot is designed to provide efficient and thorough cleaning for various glass surfaces, including high-rise windows, shower doors, glass walls, and bay windows. Featuring advanced AI intelligent path planning, dual water spray nozzles, and robust safety mechanisms, the C1 ensures a spotless and safe cleaning experience.
Video: Overview of the DREAME C1 Intelligent Window Cleaning Robot in action.
2. Setup
Before first use, please ensure all components are present and the robot is properly prepared.
-
Unpacking and Initial Inspection
Carefully remove the robot and all accessories from the packaging. Check for any visible damage. Keep the packaging for future storage or transport.
Image: DREAME C1 Window Cleaning Robot main unit.
-
Attaching Cleaning Pads
Attach the microfiber cleaning pads securely to the bottom of the robot. Ensure they are clean and dry before attachment.
Image: Close-up of the microfiber cleaning cloth, highlighting its texture.
-
Filling the Water Tank
Open the water tank cap and fill the 80ml tank with clean water or a recommended cleaning solution. Close the cap tightly to prevent leaks.
Image: Illustration of the 80ml water tank and its continuous water supply feature.
-
Power Connection and Safety Rope
Connect the power adapter to the robot and a power outlet. Ensure the 6.5mm diameter reinforced power cable is securely connected. Always attach the safety rope to a sturdy anchor point before placing the robot on a window, especially for high-rise cleaning.
Image: DREAME C1 robot connected to its power cord.
Image: Detail of the reinforced power cable and dynamic air pressure compensation system.
3. Operating Instructions
-
Placing the Robot
Place the robot on the glass surface you wish to clean. Ensure the suction cups are firmly attached to the surface. Press the power button on the robot or use the mobile application to activate suction.
Image: DREAME C1 robot securely attached to a window.
-
Using the Mobile Application
Download the DREAME mobile application to control the robot. The app allows you to select from over 10 cleaning solutions and customize various cleaning parameters.
Image: Mobile application interface for controlling cleaning modes and settings.
-
Selecting Cleaning Modes
The robot features AI intelligent path planning to optimize cleaning routes. Choose from various modes such as full coverage, spot cleaning, or edge cleaning via the app.
Image: Visual representation of the AI intelligent path planning for efficient cleaning.
-
Water Spray Function
The dual nozzles spray fine, even droplets to pre-emulsify dried-on grime, making cleaning more effective. The Sea Pulse water control system precisely manages water output.
Image: Close-up of the robot's dual nozzles spraying water to disintegrate dry stains.
-
CornerClean™ Technology
The robot utilizes CornerClean™ technology with a 360° rotating corner cleaning brush to ensure 99.99% coverage, effectively cleaning edges and hard-to-reach corners.
Image: Comparison showing the effectiveness of CornerClean™ technology in reaching corners.
4. Maintenance
-
Cleaning the Microfiber Pads
After each use, remove the microfiber cleaning pads and wash them thoroughly. They can be hand-washed or machine-washed. Ensure they are completely dry before reattaching for the next cleaning cycle.
-
Emptying and Cleaning the Water Tank
Empty any remaining water from the tank after use. Clean the water tank periodically to prevent residue buildup. Use a soft cloth to wipe the interior.
-
Wiping the Robot Body
Wipe the exterior of the robot with a soft, damp cloth. Do not use abrasive cleaners or immerse the robot in water.
5. Troubleshooting
If you encounter issues with your DREAME C1 robot, refer to the following common problems and solutions:
-
Robot Not Sticking to Surface
Ensure the glass surface is clean and free of excessive dust or moisture. Check that the suction cups are clean and intact. Verify the power connection is stable, as the robot requires continuous power for suction.
Image: Diagram illustrating the 8000Pa hurricane suction power and safety features.
-
Robot Getting Stuck or Colliding
The robot is equipped with high-precision sensors for 2mm obstacle sensing and 0.02s response time. If it frequently gets stuck, ensure there are no small, unexpected obstacles on the window frame or surface. The dynamic air pressure compensation system (PWM intelligent variable frequency technology) helps maintain stable suction even with minor leaks or gaps.
Image: High-precision sensors for millimetre-level obstacle avoidance.
-
Poor Cleaning Performance
Check if the cleaning pads are dirty and need washing or replacement. Ensure the water tank is filled and the nozzles are not clogged. For stubborn stains, a pre-treatment might be necessary.
Image: Demonstrating the robot's ability to clean various types of stains like dust, oil, bird droppings, water marks, and crayon.
6. Specifications
| Feature | Detail |
|---|---|
| Brand Name | DREAME |
| Model | C1 |
| Dimensions (L x W x H) | 270mm x 270mm x 80.5mm |
| Water Tank Capacity | 80ml |
| Continuous Water Supply | Up to 60 minutes |
| Suction Power | 8000Pa |
| Noise Level | 63dB(A) |
| Additional Features | Water spray, infrared collision avoidance, edge sensing, AI intelligent path planning, CornerClean™ technology |
| Power Cord | 6.5mm diameter reinforced cable |
| Energy Efficiency Class | First level |
| Applicable Surfaces | Smooth flat glass, seamless marble, seamless tiles |
| Package Weight | 3.4 kg |
| Package Dimensions (L x W x H) | 57 cm x 57 cm x 14 cm |
Image: Diagram showing the dimensions of the DREAME C1 robot.
Image: Information on the robot's low noise level (63dB(A)) and compatibility with various surfaces.
Image: Examples of various cleaning scenarios including floor-to-ceiling windows, shower doors, glass walls, and bay windows.
7. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
8. User Tips
- For best results, pre-clean heavily soiled windows to remove loose dirt before using the robot.
- Regularly check the cleaning pads for wear and tear, and replace them when necessary to maintain optimal cleaning performance.
- Ensure the power cable is not tangled or obstructing the robot's movement during operation.
- Always use the safety rope, especially when cleaning high or outdoor windows, to prevent accidental falls.
- Experiment with different cleaning modes via the app to find the most effective setting for various window types and levels of dirt.
