1. Product Overview
The XOSS XH01 Smart Bar End Light is designed to enhance cycling safety with intelligent features such as smart brake detection, automatic on/off, and team synchronized flashing. These lights are integrated into your bicycle's handlebars, providing a sleek and effective warning system for both MTB and road bikes.
2. Package Contents
Before installation, please ensure all items are present in the package:
- 2 x XH01 Lights
- 2 x Plug Mounts
- 1 x Dual Port Charging Cable
- 1 x Allen Key
- 1 x User Manual
3. Installation
Follow these steps to install the XOSS XH01 Smart Bar End Lights on your bicycle handlebars:
- Remove Original Handlebar Plug: Carefully remove the existing plug from your handlebar end.
- Insert and Tighten Plug Mount: Insert the light's plug mount into the handlebar hole. Use the provided Allen key to tighten the plug mount securely inside the handlebar.
- Attach the Light: Rotate the XH01 light clockwise onto the mount cap with the nut until it is firmly attached.
- Verify Installation: Ensure the light is stable and properly oriented. Installation is now complete.
4. Operating Instructions
4.1 Power On/Off and Mode Switching
The XH01 features multiple operating modes and brightness settings:
- Power On: The lights will automatically turn on when motion is detected in dim environments (Smart Mode).
- Mode Switching: After powering on, short press the button to cycle through the 5 available flash modes: Red strobe, Yellow hazard lights, Purple strobe, Colorful flashing, and Red always-on.
- Brightness Adjustment: In the 'Red always-on' mode, press and hold the button to adjust the brightness. There are three brightness levels: Low, Medium, and High. Release the button at your desired brightness to set it.
4.2 Smart Mode and Manual Mode
The XH01 can operate in two primary modes: Smart Mode and Manual Mode.
- Switching Modes: Double-click the button to toggle between Smart Mode and Manual Mode. When in Smart Mode, a blue indicator light will be visible.
- Smart Mode Features:
- Smart Light Detection, Auto On/Off: Integrating high-precision photosensors, vibration sensors, and acceleration sensors, the lights detect changes in the riding environment (light, bumps, acceleration). They will automatically turn off when the environment is bright and turn on when it's dim. In Smart Mode, the lights will also auto turn off after 30 seconds of motionlessness and turn on when vibration is detected.
- Smart Brake Detection: When braking is detected, both the left and right lights will highlight simultaneously for 3 seconds to provide a clear warning to others.
- Team Synchronized Flashing: In Smart Mode, clicking one of the lights will synchronize the flashing of the remaining lights within a limited range. The flashing frequency remains consistent across all synchronized lights in the same lighting mode.
5. Maintenance
5.1 Charging
The XH01 lights come with a dual-port Type-C charging cable for convenient charging. Observe the blue indicator light for battery status:
- Blue light blinks once every 2s: 85%-90% battery remaining (Smart Mode).
- Blue light remains off: 85%-90% battery remaining (Manual Mode).
- Blue light strobe: Low battery, charging required.
- Blue light breathing flash: Charging in progress.
- Solid blue light (turns off after 1 hr): Fully charged.
5.2 Cleaning and Storage
- Cleaning: Wipe the lights with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Waterproof: The XH01 is IPX6 waterproof, meaning it is protected against high-pressure water jets from any direction. However, it is not designed for submersion.
- Storage: Store the lights in a cool, dry place when not in use for extended periods. Ensure they are fully charged before long-term storage to preserve battery health.
6. Troubleshooting
- Light not turning on: Check battery level and charge if necessary. Ensure it's not in a bright environment if in Smart Mode. Double-click to switch between Smart and Manual modes.
- Lights not synchronizing: Ensure both lights are in Smart Mode and within close proximity for team synchronization.
- Brake detection not working: Ensure the lights are securely mounted and not obstructed. Check for sufficient battery charge.
- Short battery life: Battery life varies significantly with mode and brightness settings. Ensure the lights are fully charged. If issues persist, contact support.
7. Specifications
| Feature | Detail |
|---|---|
| Model | XH01 |
| Dimension | 29mm x 29mm x 22mm |
| Net Weight | Approx. 14g (single light) |
| Working Temperature | -10°C ~ 60°C |
| Waterproof Level | IPX6 |
| Body Material | PC (Plastic) |
| Battery Life | Approx. 4-60 hours (depending on mode) |
| Charging Port | Type-C |
| Battery Type | 3.7V/250mAh Lithium Battery |
| Power Source | Battery |
| Mounting Placement | Handlebar |
| Intelligent Sensing | Yes |
| Support Dimmer | 5-8 Files (Modes/Brightness Levels) |
8. User Tips
- For optimal battery life, utilize the Smart Mode, which automatically adjusts to ambient light and motion.
- Regularly check the battery indicator lights to ensure you have sufficient charge for your ride.
- Experiment with different flash modes and brightness settings to find the best visibility for your riding conditions.
- Ensure the lights are securely tightened in the handlebar ends to prevent loss during rides and ensure accurate brake detection.
9. Warranty and Support
For any product inquiries, technical support, or warranty claims, please contact XOSS Official Store customer service. Keep your purchase receipt as proof of purchase.
