Lenovo S05 Gaming Controller User Manual

1. Introduction

The Lenovo S05 Gaming Controller is a versatile and high-performance gamepad designed for a superior gaming experience across multiple platforms. Featuring advanced Hall Effect technology for joysticks and triggers, tri-mode connectivity, programmable back buttons, and dynamic RGB lighting, the S05 offers precision, responsiveness, and customization for serious gamers.

2. Specifications

3. Package Contents

Please check the box for the following items:

• S05 Gamepad × 1
• User Guide × 1
• Charging/Data Cable (Type-C) × 1
• 2.4G Receiver × 1 (Included with specific models/SKUs, please check your purchase details)

4. Key Features

4.1. Dual Hall Effect Joysticks

Essential for true FPS e-sports controllers, these joysticks deliver game-changing precision control. Say goodbye to drift and hello to pixel-perfect aim—every flick, sweep, and adjustment translates flawlessly, giving you the competitive edge in high-stakes shooter battles.

4.2. Next-Gen Joystick Architecture

Built on Lenovo’s heritage mechanical system, it marries silky smoothness with pinpoint precision—redefining controller feel for gamers who demand ultimate control. Every tilt, swivel, and aim is flawlessly translated, blending legacy engineering with cutting-edge performance.

• Precision System: Electromagnetic induction (Hall effect) for no drift, Hall module with adjustable 0 dead zone for better centering, and Lenovo’s algorithm for optimized precision.
• Smoothness System: Omnidirectional wear-resistant design for lasting smoothness, and a Hall module ensuring consistent, friction-free operation.

4.3. 2000-Level Joystick Resolution

By refining the detection of joystick movement trajectories to the smallest detail, a silky-smooth control experience emerges. Every minute motion is captured with unparalleled precision, translating each subtle tilt and sweep into fluid, intuitive commands.

4.4. Dual Hall Effect Triggers

Left and right Hall effect triggers deliver pinpoint accuracy. Linear triggers are tailored for racing games, allowing you to modulate speed smoothly like a real throttle. Rapid-fire triggers are optimized for fast-paced shooters, enabling split-second responses. Adapt seamlessly to every gaming scenario, from precision braking in racing sims to burst-fire combos in FPS battles.

4.5. FPS-Specific Optimization with 6-Axis Sensor

Featuring a built-in six-axis sensor, this controller delivers FPS-tuned enhancements—amplifying Hall effect joystick aim assist to turn shaky aim into precise hits. The advanced sensor calibration and ergonomic tuning provide precision for a competitive edge in every firefight.

4.6. Asymmetric Dual Vibration Motors

With 5-level adjustable vibration intensity, these motors cater to every gaming scenario—letting you fine-tune feedback from subtle environmental cues to explosive action sequences. Each vibration pulse is calibrated to amplify tension, excitement, and realism.

4.7. 4 Programmable Back-Buttons

Featuring 4 oversized back buttons (N1, N2, M1, M2) for effortless macro programming, plus 2 extra top shoulder buttons for rapid response. Support custom macros, turbo functions, and come with a comfortable, non-slip design to prevent accidental presses—all engineered for intuitive, mistake-free gameplay. Program complex combos or quick shortcuts with ease.

4.8. Turbo & Auto Turbo Function

Support for Turbo and Auto Turbo modes transforms single button presses into high-speed bursts. Hold the designated Turbo key to activate rapid-fire on any button, eliminating the need for manual spamming—perfect for FPS games requiring sustained fire or fighting games needing quick combos. The Auto Turbo function automatically repeats button presses at a pre-set frequency, allowing you to focus on aiming and strategy without finger fatigue.

4.9. Tri-Mode Connectivity & Multi-Platform Compatibility

Seamlessly transition between wired, Bluetooth, and 2.4G wireless receiver modes to dominate across Switch series, PC, Android, and iOS. This controller adapts instantly to your setup—no compromise on performance.

4.10. Colorful RGB Flowing Gradient Light Effect

Supports multi-color customization to create stunning light effects that showcase your unique personality. The dynamic gradient lighting shifts seamlessly, letting you express individual style—whether you want to elevate your gaming setup’s aesthetic or match in-game moods with vibrant, personalized hues.

5. Setup and Connection

The Lenovo S05 Gaming Controller offers three connection methods: Wired, 2.4G Wireless, and Bluetooth.

5.1. Wired Connection (Type-C)

1. Connect one end of the provided Type-C charging/data cable to the controller's Type-C port.
2. Connect the other end of the cable to a USB port on your PC, Switch dock, or other compatible device.
3. The controller should be automatically recognized and ready for use.

5.2. 2.4G Wireless Connection

1. Insert the 2.4G wireless receiver into an available USB port on your PC, Switch dock, or compatible device.
2. Turn on the controller. It should automatically pair with the receiver.
3. The indicator lights on the controller will confirm a successful connection.

5.3. Bluetooth Connection

1. Ensure the controller is powered on and in Bluetooth pairing mode (refer to the specific button combination in your included User Guide, typically holding a specific button for a few seconds until indicator lights flash rapidly).
2. On your device (Switch, Android, iOS, PC with Bluetooth), go to Bluetooth settings and search for new devices.
3. Select "Lenovo S05" or a similar name from the list of available devices.
4. Once paired, the indicator lights on the controller will stabilize.

6. Operating Instructions

6.1. Basic Controls

The controller features standard gamepad buttons including A/B/X/Y, D-pad, Left/Right Joysticks, L/R Bumpers, L/R Triggers, Start/Select/Home buttons, and additional programmable back buttons.

6.2. Charging the Controller

Connect the controller to a power source (e.g., USB port on a PC or a USB wall adapter) using the provided Type-C cable. The indicator lights will show charging status and turn off or change color when fully charged. A full charge takes approximately 1.5-2 hours and provides about 7-8 hours of play time.

6.3. Adjusting Vibration Intensity

The asymmetric dual vibration motors offer 5 levels of adjustable intensity. Refer to your included User Guide for specific button combinations to cycle through or set the desired vibration level.

6.4. Customizing RGB Lighting

The controller features colorful RGB flowing gradient light effects. Specific button presses or software (if available) can be used to change lighting modes, colors, or turn the lighting on/off. Consult your User Guide for detailed instructions on RGB customization.

6.5. Programming Back Buttons (N1, N2, M1, M2)

The 4 back buttons can be programmed for macros or remapped to other functions. The programming process typically involves entering a programming mode (e.g., holding a specific button combination), pressing the back button you wish to program, then inputting the desired sequence of buttons or a single button to map. Exit programming mode to save. Detailed steps are in the User Guide.

6.6. Using Turbo and Auto Turbo Functions

To activate Turbo mode for a button, hold the designated Turbo key (if present) and then press the button you want to apply Turbo to. To activate Auto Turbo, you may need to press the Turbo key and the desired button twice, or refer to the User Guide for specific instructions. This allows for continuous rapid input without holding the button down.

7. Maintenance

• Cleaning: Use a soft, dry cloth to clean the controller. For stubborn dirt, a slightly damp cloth can be used, but ensure no moisture enters the device.
• Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: To prolong battery life, avoid fully discharging the controller frequently. Charge it regularly, even if not in use for extended periods.
• Avoid Impact: Do not drop or subject the controller to strong impacts, as this can damage internal components.

8. Troubleshooting

8.1. Controller Not Connecting

• Check Power: Ensure the controller is charged and powered on.
• Verify Mode: Make sure the controller is in the correct connection mode (Wired, 2.4G, or Bluetooth) for your device.
• Re-pair: For wireless connections, try re-pairing the controller with your device or re-inserting the 2.4G receiver.
• Device Compatibility: Confirm your device supports the chosen connection method and is compatible with the Lenovo S05.
• Drivers: For PC, ensure necessary drivers are installed (often automatically, but manual installation might be needed for some systems).

8.2. Joystick Drift or Inaccuracy

• Recalibration: Many systems allow for joystick calibration. Check your device's settings (e.g., Nintendo Switch controller calibration, Windows Game Controller settings).
• Zero Dead Zone: The Hall Effect joysticks have an adjustable 0 dead zone. If issues persist, consult the User Guide for advanced calibration or software configuration options.

8.3. Buttons Not Responding

• Test Connection: Try a different connection method (e.g., wired instead of wireless) to rule out connectivity issues.
• Restart: Power off and on both the controller and the gaming device.
• Software: If using software configuration, ensure no conflicting profiles are active.

8.4. Vibration Not Working

• Check Settings: Ensure vibration is enabled in both the game and your device's system settings.
• Intensity Level: Verify the vibration intensity is not set to the lowest level on the controller.

9. User Tips

• Optimal Polling Rate: For competitive PC gaming, prioritize the wired connection (1000Hz polling rate) for the lowest latency. The 2.4G wireless mode (200Hz) offers a good balance of freedom and responsiveness.
• Customizing Back Buttons: Experiment with different macro configurations for the back buttons to streamline complex actions in your favorite games. This can provide a significant advantage in titles requiring quick combos or multiple inputs.
• Battery Management: While the controller has a decent battery life, consider charging it between long gaming sessions to ensure it's always ready.
• RGB Personalization: Utilize the RGB lighting effects to match your gaming setup or mood. Dynamic gradient effects can add a stylish touch.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official Lenovo support channels or the contact information provided with your purchase. Keep your proof of purchase for any warranty claims.