Lenovo S02 Wireless Bluetooth Controller Instruction Manual

Product Overview

The Lenovo S02 is a wireless Bluetooth controller designed for use with PC, Nintendo Switch, iOS, and Android devices. It supports multiple connection modes including Bluetooth and 2.4G, and offers various features for an enhanced gaming experience.

Button Diagram

The controller features the following buttons:

• Home Button
• LB (Left Bumper)
• Select Button
• Left 3D Joystick (L3)
• Right 3D Joystick (R3)
• RGB Lamp
• A/B/X/Y Buttons
• Start Button
• TURBO Button
• Left Bumper (LB)
• Right Bumper (RB)
• Left Trigger (LT)
• Right Trigger (RT)
• Cross Directional Button
• Screenshot Button

Connection Methods

Switch Connection

Pairing with Switch:

1. On the controller, long press the Y button + HOME button for 4 seconds to enter pairing mode (slow flashing red light).
2. On the Switch console, navigate to Controllers > Change Grip/Order.
3. The controller will appear as 'Pro Controller'. Once paired, the red light will be solid.

Mobile Connection (iOS/Android - X-input mode)

Pairing with Mobile:

1. On the controller, long press the Y button + HOME button for 4 seconds to enter pairing mode (slow flashing red light).
2. On your mobile device, search for Bluetooth devices and select 'Xbox Wireless Controller' to pair.
3. Once paired, the red light will be solid.

Mobile Connection (Android - D-input mode)

Pairing with Mobile:

1. On the controller, long press the B button + HOME button for 4 seconds to enter pairing mode (slow flashing yellow light).
2. On your mobile device, search for Bluetooth devices and select 'Lenovo S02 Gamepad' to pair.
3. Once paired, the yellow light will be solid.

2.4G Mode Connection

Pairing with 2.4G Receiver:

1. Plug the 2.4G receiver into your PC or compatible device.
2. On the controller, long press the A button + HOME button for 4 seconds to enter pairing mode (slow flashing green light).
3. Once paired, the green light will be solid.

PC Wired Connection (X-input/D-input)

Connect the controller to your PC using a Type-C cable. The connection defaults to X-input mode (Device name: Xbox360 Controller for Windows). To switch to D-input mode, press and hold the Select and Start buttons for 3-5 seconds.

Software Upgrade

After successful connection to your mobile device, open the 'MooWii Gaming' app (available on Google Chrome or Apple App Store) to perform software upgrades.

TURBO Function

The TURBO function allows for continuous button presses. Different TURBO speeds can be achieved by pressing the TURBO button multiple times.

• Turn on TURBO for a button: Press the desired button + TURBO.
• Turn off TURBO for a button: Press the desired button + TURBO again.
• Clear all TURBO functions: Triple-click the TURBO button.

TURBO Speed Adjustment:

• Increase speed (5Hz, 10Hz, 20Hz): Press T + Cross Key Up.
• Decrease speed (20Hz, 10Hz, 5Hz): Press T + Cross Key Down.
• The default speed is 10Hz.

Motor Vibration Intensity Adjustment (Switch Only)

Adjust vibration intensity between None, Medium (initial), and Strong.

• Increase strength: Press T key + Cross Key Up.
• Decrease strength: Press T key + Cross Key Down.

Joystick Calibration

To calibrate the joysticks:

1. Long press the Window button + HOME button for 3 seconds to enter calibration mode (white light flashes slowly).
2. Move both joysticks to their full range of motion 3 or more times.
3. Press the trigger buttons 3 times.
4. Press the Window button + HOME button briefly to exit calibration. The indicator light will flash 3 times quickly upon successful calibration.
5. If calibration fails, the mode will exit directly.

Lighting Effect Settings

Short press the TURBO key and the Window key simultaneously to cycle through 8 different lighting effects, or turn them off.

Battery Status Display

• Low Battery: The controller flashes 5 times per second and cycles every 30 seconds.
• Fully Charged: All lights turn off.
• Charging: The HOME light turns off, and the white light flashes slowly. If the controller is connected, charging effects may take priority.

Product Specifications

Button Exchange Function

Press and hold X + Y + HOME for 2 seconds to swap button functions (e.g., A becomes B, X becomes Y). The controller will vibrate for 0.5 seconds upon successful setting.

Packaging Content

• Game controller x1
• User Manual x1
• Type-C data cable x1

Warnings

• Do not place the controller in direct sunlight.
• Do not expose the controller to water.
• Do not place heavy objects on the controller.
• Avoid contact with liquids or small particles.
• Do not twist or pull the control levers excessively.