1. Introduction
Thank you for choosing the WZB-20F/S Automatic Ice Cube Maker. This appliance is designed for convenient and efficient ice production in both commercial and household settings. Please read this manual thoroughly before operating the machine to ensure safe and optimal performance. Keep this manual for future reference.
2. Safety Instructions
- Ensure the power supply matches the voltage specified on the appliance (220V).
- Do not immerse the appliance, power cord, or plug in water or other liquids.
- Keep the appliance away from heat sources, direct sunlight, and flammable materials.
- Always unplug the ice maker before cleaning or when not in use.
- Do not operate the appliance with a damaged cord or plug. Contact qualified service personnel for repair.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Ensure proper ventilation around the unit. Do not block air vents.
- Use only potable water for ice production.
3. Product Overview
The WZB-20F/S ice maker features a user-friendly control panel and multiple water intake options for convenience.
3.1 Water Intake Options
Figure 1: Water intake options for the WZB-20F/S ice maker. Options include using a bottled water dispenser, manually adding water, or connecting to an automatic water supply with a filter.
Figure 2: Example setup of the automatic water intake system, highlighting the external filter connection.
3.2 Control Panel
Figure 3: Control panel layout and functions.
- Ambient Temperature: Displays the current room temperature.
- Water Shortage Symbol: Illuminates when the water reservoir needs refilling.
- Ice Full Symbol: Illuminates when the ice basket is full.
- Power-on Symbol: Indicates the machine is powered on.
- Ice Making Time Countdown: Shows the remaining time until the next batch of ice is ready.
- Fault Symbol: Illuminates if an error occurs.
- Ice Making: Indicates the machine is currently producing ice.
- Ice Making Time Setting Area: Allows adjustment of ice making cycle duration.
- Switch (On/Off): Powers the unit on or off.
- '+' and '-' Buttons: Used to adjust settings, typically ice making time.
- Automatic Cleaning Button: Press and hold the 'Switch' button for more than 5 seconds to activate automatic cleaning.
4. Setup
- Unpacking: Carefully remove the ice maker from its packaging. Remove all packing materials, tape, and labels.
- Placement: Place the ice maker on a flat, stable surface. Ensure there is adequate ventilation around the unit (at least 15 cm clearance on all sides). Avoid placing it near heat sources or in direct sunlight.
- Initial Cleaning: Before first use, clean the interior of the ice maker according to the 'Cleaning and Maintenance' section.
- Water Connection: Choose one of the following water intake methods:
- Manual Water Inlet: Open the water inlet cover and pour potable water directly into the reservoir until it reaches the MAX fill line.
- Bottled Water: Place a compatible bottled water dispenser on top of the unit.
- Automatic Water Intake: Connect the ice maker to a potable water supply using the provided hose and filter. Ensure all connections are secure to prevent leaks.
- Power Connection: Plug the power cord into a grounded 220V electrical outlet.
5. Operating Instructions
- Power On: Press the 'Switch' button to turn on the ice maker. The Power-on Symbol will illuminate.
- Water Check: Ensure the water reservoir is filled. If the Water Shortage Symbol is lit, add water using your chosen method.
- Start Ice Making: The machine will automatically begin the ice-making cycle. The 'Ice Making' symbol will illuminate, and the 'Ice Making Time Countdown' will display the estimated time for the first batch (typically 12-20 minutes).
- Adjust Ice Making Time (Optional): Use the '+' and '-' buttons in the 'Ice Making Time Setting Area' to adjust the duration of the ice-making cycle, which can affect ice cube thickness.
- Ice Collection: Once ice is made, it will drop into the ice basket. The 'Ice Full Symbol' will illuminate when the basket is full, and the machine will pause operation until ice is removed.
- Power Off: Press the 'Switch' button again to turn off the ice maker when not in use.
6. Cleaning and Maintenance
Regular cleaning and maintenance will prolong the life of your ice maker and ensure hygienic ice production.
6.1 Automatic Cleaning
To activate the automatic cleaning function, press and hold the 'Switch' button for more than 5 seconds. The machine will run a cleaning cycle. After the cycle, drain any remaining water and wipe the interior dry.
6.2 Manual Cleaning
- Daily: Wipe down the exterior with a soft, damp cloth.
- Weekly: Remove the ice basket and clean it with warm, soapy water. Rinse thoroughly and dry.
- Monthly: For a deeper clean, unplug the unit and drain all water. Clean the interior surfaces, including the water reservoir and ice-making components, with a solution of water and mild detergent or a food-grade descaler. Rinse thoroughly multiple times to remove any residue.
- Water Filter: If using automatic water intake with a filter, replace the filter regularly as recommended by the filter manufacturer or when ice quality deteriorates.
Caution: Do not use abrasive cleaners, solvents, or sharp objects to clean the ice maker, as these can damage the surfaces.
7. Troubleshooting
If you encounter issues with your ice maker, refer to the following table before contacting service.
| Problem | Possible Cause | Solution |
|---|---|---|
| Ice maker does not turn on. | No power supply. | Check if the power cord is securely plugged into a working 220V outlet. |
| Water Shortage Symbol is lit. | Water reservoir is empty. | Add potable water to the reservoir or ensure automatic water supply is connected and open. |
| Ice Full Symbol is lit, but ice basket is not full. | Ice sensor is blocked or dirty. | Clean the ice sensor. Ensure ice cubes are not jamming the sensor. |
| No ice production or small ice cubes. | Insufficient water, high ambient temperature, or short ice-making cycle. | Ensure adequate water. Place the unit in a cooler environment. Adjust the ice-making time using '+' button for larger cubes. |
| Fault Symbol is lit. | Internal error. | Unplug the unit for 10 minutes, then plug it back in and restart. If the error persists, contact customer support. |
8. Specifications
Figure 4: Product dimensions and key specifications.
| Feature | Specification |
|---|---|
| Model | WZB-20F/S |
| Voltage | 220V |
| Rated Power | 120W |
| 24-hour Ice Production | 25 kg |
| Single Ice Output | 24 pieces |
| Ice Cube Shape | Square Ice |
| Ice Storage Capacity | 1.3 kg / 160 pieces |
| Single Ice Time | 12-20 minutes |
| Water Addition Capacity | 2.2 Liters |
| Water Inlet Method | Manual / Automatic / Bottled Water |
| Material | Stainless steel |
| Machine Weight | 11 kg |
| Package Weight | 13 kg |
| Package Dimensions (L*W*H) | 37.5 * 29 * 36 cm |
9. User Tips
- For best results, use cold, filtered water. This can improve ice quality and reduce mineral buildup.
- If the ice maker is moved, allow it to stand upright for at least 2-4 hours before plugging it in to allow the refrigerant to settle.
- Regularly check and clean the air vents to ensure efficient operation and prevent overheating.
- Empty the ice basket and water reservoir if the machine will not be used for an extended period.
10. Warranty and Support
This product comes with a standard manufacturer's warranty. For specific warranty details, please refer to the documentation provided at the time of purchase or contact your retailer. If you require technical support or have questions not covered in this manual, please reach out to the customer service department of your seller.
