Introduction
The Dibea HC26 is a state-of-the-art cordless wet vacuum cleaner designed for efficient and convenient floor cleaning. Featuring a high-speed dynamic water system, intelligent dirt-sensing technology, and an LED display, it offers a powerful and smart solution for both wet and dry messes. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your Dibea HC26.
What's in the Box
Carefully unpack all components and ensure you have received the following items:
- Machine Body + Handle Assembly (x1)
- Spare Roller Brush (x1)
- Spare HEPA Filter (x1)
- Cleaning Brush (x1)
- Adapter (x1)
- Charging Base (x1)
Specifications
Refer to the table below for detailed technical specifications of the Dibea HC26:
| Feature | Specification |
|---|---|
| Machine Dimensions | 1095 x 265 x 271 mm |
| Product Weight | 3.85 kg |
| Rated Power | 250 W |
| Battery Type & Specification | Li-ion 4000mAh |
| Clean Water Tank Capacity | 700 ml |
| Sewage Tank Capacity | 700 ml |
| Charging Time | 4-5 hours |
| Suction Power | 16 KPa |
| Maximum Runtime | 30-60 minutes |
| Noise Level | ≤75 dB |
| Motor Type | Brushless motor |
| Certification | CE |
Setup
1. Assembly
- Carefully remove all components from the packaging.
- Insert the handle assembly into the main body of the vacuum cleaner until it clicks securely into place.
2. Charging
- Place the assembled vacuum cleaner onto the charging base.
- Connect the adapter to the charging base and then plug it into a power outlet.
- The LED display will indicate the charging status. A full charge typically takes 4-5 hours.
3. Preparing Water Tanks
- Remove the clean water tank (700ml capacity) from the vacuum cleaner.
- Fill the clean water tank with tap water. For enhanced cleaning and sterilization, the vacuum can automatically electrolyze tap water into a sterilizing solution.
- Ensure the dirty water tank (700ml capacity) is empty and properly installed before use.
Operating Instructions
1. Power On/Off
Press the power button located on the handle to turn the vacuum cleaner on or off.
2. Cleaning Modes
The Dibea HC26 offers multiple cleaning modes, selectable via buttons on the handle and displayed on the LED screen:
- Auto Mode: The vacuum intelligently senses dirt levels and automatically adjusts suction power for optimal cleaning.
- Self-Cleaning Mode (Electrolytic Water Sterilization Mode): Activates the self-cleaning function for the roller brush and prepares electrolyzed water for sterilization.
- Water Absorption Mode: Designed for quickly absorbing liquid spills.
3. Electrolytic Water Sterilization
With the built-in electrolytic water mode, simply add tap water to the clean water tank. The vacuum will automatically electrolyze it into a sterilizing solution, effectively cleaning and disinfecting floors with a rate of up to 99.99% without the need for additional chemicals.
4. Intelligent Dirt-Sensing System
The HC26 features an infrared cross-stain monitoring system that intelligently detects how dirty the floor is and automatically adjusts the suction power for optimal cleaning efficiency.
5. Voice Prompts and LED Display
The vacuum provides intelligent voice prompts to inform you of its operation status (e.g., "Cleaning in progress," "Dirty water tank is full"). The large LED digital display screen offers real-time visual feedback on battery life, current mode, and other important information.
6. Vertical Auto-Power-Off
For convenient storage and to prevent accidental operation, the vacuum cleaner will automatically power off when placed in a vertical position.
Maintenance
1. Self-Cleaning Function
After cleaning, place the vacuum on its charging base and activate the self-cleaning mode. The rollers will automatically undergo a centrifugal spin-dry to remove residual stains and inhibit bacterial growth, followed by a powerful air-dry to ensure they are clean and ready for the next use. This eliminates the need to manually wash the rollers.
2. Cleaning Water Tanks
- Dirty Water Tank: Regularly empty and rinse the dirty water tank after each use to prevent odors and bacterial buildup. The tank is designed for easy removal and cleaning.
- Clean Water Tank: Periodically rinse the clean water tank to ensure no residue accumulates.
3. Roller Brush and HEPA Filter
- Roller Brush: While the self-cleaning function is effective, occasionally inspect the roller brush for any tangled hair or debris that may not have been removed. Use the provided cleaning brush if necessary. Replace the roller brush when it shows signs of wear.
- HEPA Filter: The HEPA filter should be cleaned regularly and replaced periodically to maintain optimal suction and air quality. Refer to the product's specific guidelines for replacement frequency.
4. General Cleaning
Wipe the exterior of the vacuum cleaner with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
Troubleshooting
If you encounter any issues with your Dibea HC26, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Vacuum does not turn on | Low battery; Not properly charged; Power button not pressed correctly. | Charge the vacuum fully; Ensure the adapter is connected; Press the power button firmly. |
| Low suction power | Dirty water tank full; Clogged filter; Blocked roller brush. | Empty and clean the dirty water tank; Clean or replace the HEPA filter; Remove any blockages from the roller brush. |
| Water leakage | Water tank not properly installed; Tank seal damaged. | Ensure both clean and dirty water tanks are securely in place; Inspect tank seals for damage and contact support if necessary. |
| Abnormal noise | Foreign object in brush head; Motor issue. | Check brush head for obstructions; If noise persists, contact customer support. |
If the problem persists after attempting these solutions, please contact customer support for further assistance.
User Tips
- For best results, always ensure the clean water tank is filled and the dirty water tank is empty before starting a cleaning session.
- Regularly utilize the self-cleaning function to maintain the hygiene and performance of the roller brush.
- For stubborn stains, allow the electrolyzed water to sit on the surface for a few moments before vacuuming.
- Store the vacuum cleaner on its charging base to ensure it's always ready for use.
Warranty and Support
The Dibea HC26 Cordless Wet Vacuum Cleaner comes with a manufacturer's warranty. Please refer to your purchase documentation for specific warranty terms and conditions. For technical support, spare parts, or warranty claims, please contact the retailer or Dibea customer service directly. Keep your proof of purchase handy when contacting support.
