Introduction
Thank you for choosing the HOCO EQ2 Plus True Wireless Bluetooth Earphones. This manual provides essential information on how to set up, operate, and maintain your new earphones to ensure optimal performance and longevity. Please read this manual carefully before use.
Package Contents
Please check the box for the following items:
- HOCO EQ2 Plus True Wireless Earbuds
- Charging Case
- Charging Cable
- User Manual (this document)
Product Overview
The HOCO EQ2 Plus earphones feature a comfortable in-ear design, smart touch controls, and an LED digital display on the charging case for real-time power indication.
Setup
1. Charging the Earphones and Case
Before first use, fully charge the earphones and the charging case.
- Place the earphones into the charging case.
- Connect the charging case to a power source using the provided USB-C charging cable.
- The LED digital display on the charging case will show the battery level.
- A full charge for the headset takes approximately 1 hour.
2. Pairing with a Bluetooth Device
The HOCO EQ2 Plus earphones support automatic pairing.
- Open the lid of the charging case. The earphones will automatically power on and enter pairing mode.
- On your device (smartphone, tablet, etc.), enable Bluetooth.
- Search for available Bluetooth devices and select "HOCO EQ2 Plus" from the list.
- Once connected, you will hear a confirmation tone, and the earphones are ready for use.
The earphones support master-slave switching, allowing either earbud to be used independently.
Operating Instructions
Power On/Off
- Power On: Open the charging case lid. The earphones will automatically power on.
- Power Off: Place the earphones back into the charging case and close the lid. They will automatically power off and begin charging.
Touch Controls
The headset handle features a touch-sensitive area for various functions:
- Tap the touch area: Play/Pause music.
- Double tap the touch area: Skip to the next track.
- Triple tap the touch area: Go to the previous track.
- Four tap the touch area: Activate voice assistant (e.g., Siri).
Calling
- Answer/End Call: Tap the touch area once.
- Reject Call: Press and hold the touch area for 2 seconds.
Voice Assistant
To activate your device's voice assistant (e.g., Siri), perform a four-tap gesture on the touch area of either earbud.
Maintenance
- Keep the earphones and charging case clean and dry. Use a soft, dry cloth to wipe them.
- Avoid exposing the device to extreme temperatures, humidity, or corrosive substances.
- Do not attempt to disassemble or repair the earphones yourself, as this will void the warranty and may cause damage.
- Store the earphones in their charging case when not in use to protect them and keep them charged.
Troubleshooting
- Earphones not pairing: Ensure both earphones are in the charging case, then open the lid to re-enter pairing mode. Make sure Bluetooth is enabled on your device and try searching again.
- Only one earbud working: Place both earbuds back into the charging case, close the lid, then open it again. This should reset the connection and allow both to pair.
- No sound: Check the volume level on your connected device and ensure the earphones are properly paired.
- Charging issues: Verify the charging cable is securely connected to both the case and the power source. Check for any debris in the charging port.
- Voice assistant not responding: Ensure your device's voice assistant is enabled and that you are performing the four-tap gesture correctly.
Specifications
| Feature | Specification |
|---|---|
| Brand | HOCO |
| Model | EQ2 Plus |
| Bluetooth Version | 5.4 |
| Battery Capacity (Charging Case) | 320mAh |
| Battery Capacity (Headset) | 40mAh |
| Usage Time (Single Headset) | 7 hours |
| Total Usage Time (with charging case) | Up to 28 hours |
| Standby Time | 180 hours |
| Charging Time | Approx. 1 hour |
| Dimensions (Charging Case) | 58 * 49 * 25mm |
| Total Weight | 45.5g |
| Single Headset Weight | 4g |
| Speaker Size | 13mm Dynamic Coil |
| Material | Plastic |
| Impedance Range | Up to 32 Ω |
| Frequency Response Range | 20 - 20000Hz |
| Sensitivity | 98dB |
| Microphone | Yes |
| Vocalism Principle | Dynamic |
| Active Noise-Cancellation | No |
| Volume Control | No (via touch controls) |
| Charging Method | Charging case (USB-C) |
User Tips
- For the best audio experience, ensure the earbuds fit snugly in your ears.
- Regularly check the battery level on the charging case's LED display to avoid unexpected power loss.
- If experiencing connection issues, try resetting the earphones by placing them in the case, closing it, and then reopening it.
- Keep the charging contacts on both the earbuds and the case clean to ensure efficient charging.
Warranty and Support
For warranty information and technical support, please refer to the official HOCO website or contact your retailer. Keep your purchase receipt as proof of purchase for any warranty claims.
