ANJANK AC196 Digital Alarm Clock with FM Radio

Introduction

Thank you for choosing the ANJANK AC196 Digital Alarm Clock. This device combines a digital alarm clock with an FM radio, a large LED display, dual alarm functionality, and a convenient USB charging port. Designed for ease of use, it is suitable for various settings such as bedrooms, kitchens, and desktops. Please read this manual carefully to ensure proper operation and to fully utilize all features.

Safety Information

• Do not expose the unit to extreme temperatures, direct sunlight, dust, or humidity.
• Ensure the power adapter is compatible with your local power supply.
• Keep the device away from water or other liquids.
• Do not attempt to disassemble or modify the unit. This will void the warranty.
• Clean the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.

Package Contents

• ANJANK AC196 Digital Alarm Clock
• Power Adapter (American, British, or Europlug depending on region)
• User Manual (this document)

Product Overview

Controls and Ports Diagram

Refer to the diagram below for an overview of the alarm clock's controls and ports.

Image Description: A detailed diagram showing the top and rear views of the ANJANK AC196 alarm clock. Key components labeled include: Alarm ON/OFF switches (AL1, AL2), Alarm Wakeup Day Set switches (Sat-Sun, Mon-Fri, Mon-Sun, Turn Off), FM Radio button, Alarm 1 Set button, Alarm 2 Set button, Time Set button, Snooze Rotary Button, Battery Component, USB Port (5V/1A), Power Connector, Antenna, Radio Vol dial, and Dimmer dial.

Front View

Image Description: A front-angle view of the ANJANK AC196 Digital Alarm Clock, showcasing its large blue LED display showing '12:30' and 'TUES', with alarm indicators and control buttons on top.

Setup

1. Power Connection: Connect the provided power adapter to the 'Power Connector' port on the back of the alarm clock and plug it into a wall outlet. The display will light up.
2. Battery Backup (Optional): For time and alarm settings retention during power outages, insert 2 AAA batteries (not included) into the 'Battery Component' compartment on the back. Note: Batteries only provide backup for settings, not for powering the display or alarms.
3. Antenna: Extend the FM antenna located at the back of the unit for better radio reception.

Image Description: The ANJANK AC196 Digital Alarm Clock shown next to its power adapter, illustrating the power connection.

Operating Instructions

Setting the Time

1. Press the 'TIME SET' button once. The hour digits will flash.
2. Rotate the 'SNOOZE ROTARY BUTTON' to adjust the hour.
3. Press 'TIME SET' again. The minute digits will flash.
4. Rotate the 'SNOOZE ROTARY BUTTON' to adjust the minutes.
5. Press 'TIME SET' a third time to confirm and exit time setting.
6. To switch between 12-hour and 24-hour format, press the '12/24H' button on the back of the unit.

Setting Alarms (AL1 and AL2)

The clock features two independent alarms (AL1 and AL2).

1. Set Alarm Time:
   a. Press the 'ALARM 1 SET' or 'ALARM 2 SET' button. The hour digits for that alarm will flash.
   b. Rotate the 'SNOOZE ROTARY BUTTON' to adjust the hour.
   c. Press the respective 'ALARM SET' button again. The minute digits will flash.
   d. Rotate the 'SNOOZE ROTARY BUTTON' to adjust the minutes.
   e. Press the respective 'ALARM SET' button a third time to confirm the alarm time.
2. Select Alarm Wake-up Day Mode:
   a. Use the 'ALARM WAKEUP DAY SET' switches (AL1 and AL2) on the top of the clock.
   b. Slide the switch for AL1 or AL2 to select one of the three modes:
   
   • SAT-SUN: Alarm sounds only on weekends.
   • MON-FRI: Alarm sounds only on weekdays.
   • MON-SUN: Alarm sounds every day.

   To turn off an alarm completely, slide its respective switch to 'TURN OFF'.
3. Choose Alarm Sound:
   a. The alarm can wake you up with either a standard beep or the FM radio.
   b. To select FM radio as the alarm sound, ensure the radio is tuned to your desired station and the volume is set appropriately before the alarm time. The last played FM station will be used.

Image Description: The ANJANK AC196 alarm clock displaying '5:00' with two alarm icons, illustrating the dual alarm capability with example wake-up times (AM 7:00 and PM 3:00).

Image Description: A close-up of the alarm clock's top panel showing the AL1 and AL2 switches and their settings for 'Sat-Sun (Weekend)', 'Mon-Fri (Weekdays)', and 'Mon-Sun (Everyday)' wake-up modes.

Snooze Function

When an alarm sounds, press the large 'SNOOZE ROTARY BUTTON' on top of the clock to temporarily silence the alarm for 10 minutes. The alarm will sound again after 10 minutes. You can repeat this process multiple times.

Turning Off an Alarm

To turn off a sounding alarm completely, long press the 'ALARM 1 SET' or 'ALARM 2 SET' button corresponding to the active alarm. The alarm indicator on the display will turn off.

FM Radio Operation

1. Turn On/Off: Press the 'FM RADIO' button to turn the radio on or off.
2. Auto-Scan: Long press the 'FM RADIO' button to auto-scan and save available FM stations (87.5–108MHz).
3. Tune Stations: Short press the 'FM RADIO' button to cycle through saved stations.
4. Volume Control: Rotate the 'RADIO VOL' dial on the back of the unit to adjust the radio volume (0-100%).

Image Description: The ANJANK AC196 alarm clock on a bedside table, with icons indicating FM Radio, Adjustable Volume, and Sleep Timer features.

Sleep Timer

The sleep timer allows you to fall asleep to the radio, which will automatically turn off after a set duration.

1. While the FM radio is playing, press the 'SLEEP TIMER' button on the back of the unit.
2. Repeatedly press the 'SLEEP TIMER' button to cycle through available sleep timer durations (e.g., 10, 15, 30, 60, 90, 120, 150 minutes).
3. The radio will automatically turn off after the selected time.

Image Description: Three close-up images showing the 'RADIO VOL' dial for 0-100% radio volume, the 'SLEEP' button for the auto-off timer, and the USB charging port.

Display Dimmer

Adjust the brightness of the LED display to your preference.

1. Locate the 'DIMMER' dial on the back of the unit.
2. Rotate the dial to adjust the display brightness from 0% (off) to 100% (brightest).

Image Description: The ANJANK AC196 alarm clock demonstrating its 0-100% dimming capability, with a slider graphic indicating brightness levels from dark to bright.

Image Description: A close-up of the 'DIMMER' dial on the back of the alarm clock, used for controlling display brightness.

USB Charging Port

The alarm clock features a built-in USB charging port (5V/1A) on the back.

1. Connect your smartphone or other USB-powered device to the 'USB Port (5V/1A)' using a compatible USB cable.
2. The device will begin charging. This port is ideal for overnight charging of small electronics.

Image Description: The ANJANK AC196 alarm clock on a desk, with a smartphone connected and charging via its USB port.

Maintenance

• Cleaning: Wipe the clock's surface with a soft, dry, lint-free cloth. Do not use liquid or aerosol cleaners.
• Storage: If storing the clock for an extended period, disconnect it from power and remove any backup batteries. Store in a cool, dry place.

Troubleshooting

Frequently Asked Questions (FAQ)

Image Description: An image titled 'FAQ' presenting five common questions and their answers regarding the alarm clock's power source, radio type, size, alarm volume, and how to turn off the alarm.

Q1: Is this a battery-operated alarm clock?

A: No, this alarm clock is a plug-in electric alarm clock with battery backup settings. The batteries are for retaining settings during power outages, not for powering the main functions.

Q2: Is this alarm clock a digital FM alarm clock?

A: Yes, this alarm clock features a digital tuning FM radio.

Q3: What's the size of this digital clock?

A: The screen size is 6.5 inches, with digit size 1.58 inches. Overall dimensions are approximately 6.6 x 3.2 x 1.8 inches (Length x Width x Height).

Q4: Was the alarm really loud to start out?

A: The alarm comes on softly and gradually gets louder, providing a gentle way to wake up.

Q5: Where is the alarm clock off button?

A: To turn off a sounding alarm, long press the 'ALARM 1 SET' or 'ALARM 2 SET' button. The alarm indicator will turn off when the alarm is disarmed.

General Troubleshooting

• No Display/Power: Ensure the power adapter is securely plugged into both the clock and a working wall outlet. Check if the outlet has power.
• Poor FM Reception: Extend and reposition the FM antenna. Try moving the clock to a different location to improve signal.
• Alarm Not Sounding: Verify that the alarm is enabled (AL1/AL2 switch is not on 'TURN OFF') and the alarm time is correctly set. Check the alarm volume if using FM radio as the alarm sound.
• USB Charging Not Working: Ensure the clock is powered on. Check the USB cable and the device being charged. The USB port provides 5V/1A output.

Specifications

User Tips

• Gentle Wake-up: The alarm starts softly and gradually increases in volume, which many users find less jarring than an abrupt loud alarm.
• Optimal Dimming: Experiment with the dimmer dial to find the perfect display brightness for both day and night viewing without disturbing sleep.
• USB Charging Convenience: Utilize the built-in USB port to charge your phone overnight, reducing clutter on your bedside table.
• Radio Alarm: If you prefer waking up to music or news, set your favorite FM station as the alarm sound. Ensure the radio volume is set to a comfortable level beforehand.
• Easy Alarm Off: Remember that a long press on the ALARM 1 or ALARM 2 button will turn off the sounding alarm completely, rather than just snoozing it.

Warranty and Support

ANJANK products are designed for reliability and performance. For any questions, technical support, or warranty inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.