1. Product Overview
The Autophix 7910 is a professional diagnostic scanner designed for BMW, MINI, and Rolls Royce vehicles. It supports most electronic systems for vehicles manufactured between 1998 and 2001, and all models after 2001. This tool can perform multi-system diagnostics and service reset functions for drive ECM, body BCM, and chassis systems. Additionally, it functions as a universal OBD2/EOBD tool for engine system diagnostics on other vehicle brands.
The device features a 2.8-inch TFT 262K true color LCD display for clear test results and a silicone keypad for easy menu navigation. Its rugged, drop-proof case ensures durability.
Figure 1: Autophix 7910 OBD2 Scanner with key features
Key Features:
- Professional support for BMW/MINI/Rolls Royce all system diagnoses.
- Supports special functions for ABS/ASC/DSC, etc., for BMW/MINI/Rolls Royce.
- Reads engine fault codes for all OBD2 cars (engine system only).
- Supports 10 kinds of multi-language menus.
- Lifetime free online updates.
- Hotkey for I/M & read DTC, offering faster scanning.
- Two interface skin styles for choosing.
- Suitable for personal use and auto repair shops.
2. Setup
2.1 Device Layout and Dimensions
Figure 2: Autophix 7910 Device Layout
The device features an LCD Display, ESC Button, I/M Button, OBD-16Pin Connector, READ DTC button, Direction Buttons, and an OK Button. The dimensions are approximately 6.02 inches in height and 3.74 inches in width.
2.2 Language Selection
The Autophix 7910 supports multiple languages for its menu interface. You can select your preferred language from the settings menu.
Figure 3: Multi-language Support
2.3 Connecting to Vehicle
- Locate your vehicle's OBD-II port, usually found under the dashboard on the driver's side.
- Ensure the vehicle's ignition is turned ON (engine can be off).
- Connect the Autophix 7910's OBD-16Pin Connector to the vehicle's OBD-II port.
- The device will power on automatically.
3. Operating Instructions
3.1 OBDII Diagnostic Mode (Universal)
This mode is compatible with most cars manufactured after 1996 that support OBD2 protocols. It allows you to perform basic engine diagnostics.
- Read Codes: Retrieves Diagnostic Trouble Codes (DTCs) from the vehicle's engine system.
- Erase Codes: Clears DTCs from the vehicle's engine system.
- I/M Readiness: Checks the status of emission-related monitoring systems to ensure they are ready for inspection.
- Data Stream: Displays real-time data parameters from the engine.
- Evap System Test: Initiates a test of the evaporative emission control system.
- Vehicle Information: Retrieves vehicle identification number (VIN) and other calibration information.
Figure 4: Universal OBD2 Diagnostic Functions
3.2 Full System Scan (for BMW/MINI/Rolls Royce)
For BMW, MINI, and Rolls Royce vehicles, the Autophix 7910 offers comprehensive full system diagnostics, covering various electronic control systems:
- Engine System
- Brake Lines System (ABS)
- ABS System
- DPF System
- Injector System
- Throttle Valve Position System
- Airbag System
- Exhaust Gas System
- Battery Management System
- Bleeding Routine System
- Mix-up Check System
- Idle Speed Adjustment System
- CAS Car Access System
- ECM Engine Control Module
- EGS Transmission Control
- EML Electronic Engine-power Control
- ADS Throttle-valve Control
- ZKE Central Body Electronics
- VTG Transfer Case
- AL Active Steering
- RDC Type Pressure Control
- ACC Active Cruise Control
- ARS Dynamic Drive
- DSC Dynamic Stability Control
- EPB Electronic Parking Brake
- EPS Electronic Power Steering
- EHC Electronic Ride Height Control
- EDC Damper Control
Figure 5: Full System Scan for BMW Vehicles
Figure 6: All System Diagnostic Capabilities
3.3 Special Service Reset Functions
The Autophix 7910 provides numerous special functions for maintenance and resets:
Figure 7: Full Service Functions Overview
- Maintenance Function A (CBS Reset): Resets and corrects CBS maintenance items including Engine oil, Spark plugs, Front brakes, Rear brakes, Coolant, Diesel particle filter, Brake fluid, Microfilter, Vehicle inspection, Exhaust emission inspection, and Vehicle check.
- Maintenance Function B: Resets maintenance interval indicators for Oil service, Inspection, Time interval, Correct follow-on service, and Display service interval status.
- DME/DDE Engine Special Functions: Includes IQA, Idle speed adjustment, Fuel injection rate, CO adjustment, Clear adaptions, Learn Valvetronic limit positions, Exhaust gas recycling, DPF Regeneration, and Replace DPF.
- ABS/ASC/DSC Special Functions: Performs bleeding routine, Mix-up checks, brake lines, and Adjustment steering-angle sensor.
- EGS Clear Adaptions: Clears Electronic Gearbox System adaptions.
- Battery Management: Registers battery replacement and evaluates battery charge state.
- EPB Electronic Parking Brake: Provides matching procedures, repair shop mode (for brake pad replacement), and initialization.
- Adjustment Steering-Angle Sensor: Calibrates the steering angle sensor.
- F Chassis Fuel Pump Reset: Resets the fuel pump for F-chassis vehicles.
- ECU Reset: Includes ACSM/airbag ECU reset and RDC TPMS ECU reset.
Figure 8: Powerful Diagnostic Functions
3.4 Product Demonstration Video
Video 1: Autophix 7910 Full System Scanner Demonstration. This video demonstrates the OBD diagnostic, full system scan, special functions, and vehicle support of the Autophix 7910.
4. Maintenance
4.1 Oil Light Service Reset
The Engine Oil Life System calculates when to change the engine oil and filter based on vehicle use. An oil change is required whenever indicated by the display and according to the recommended maintenance schedule. Whenever the oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where the oil is changed prior to a service indicator being turned on, also reset the system.
Figure 9: Oil Light Service Reset
4.2 Battery Registration / Battery Maintenance
This function allows you to evaluate the battery charge state, monitor the closed-circuit current, and register battery replacement.
Figure 10: Accurate Battery Check
Figure 11: Battery Voltage Status
How to Register a Battery:
The process for battery registration is straightforward:
- Remove the old battery.
- Install the new battery.
- Enter the new battery's 12-digit code into the device. Ensure the code is entered correctly, as it affects product accuracy.
Figure 12: Battery Registration Steps
5. Troubleshooting
- "Communication Error" Message: If you encounter this message, ensure the ignition switch is ON, the tester is securely connected to the vehicle's DLC (Data Link Connector), and the vehicle's battery is sufficiently charged.
- No Fault Codes Displayed: If the device indicates "The vehicle has no fault codes," it means no current diagnostic trouble codes are present in the system.
- Clearing DTCs: If fault codes are present, you can attempt to clear them directly using the "Erase Codes" function.
- I/M Readiness Issues: For emission-related concerns, always check the I/M Readiness monitors and ensure they are all marked as "Ready" to avoid rejection during annual inspections.
6. Specifications
| Feature | Description |
|---|---|
| Display | 2.8-inch TFT 262K True Color LCD |
| Supported Languages | English, French, Spanish, German, Russian, Swedish, Portuguese, Finnish, Norwegian, Danish |
| OBD2 Compatibility | Vehicles after 1996 (OBD Mode) |
| Dimensions (H x W) | Approx. 6.02 in x 3.74 in |
| Weight | 0.52 kg |
| Certification | CE |
| Software Update | Yes, Lifelong Free Online Updates (Newest Version) |
| Hardware Version | The Newest Version |
| Item Type | Code Readers & Scan Tools |
| Origin | Mainland China |
6.1 Supported Vehicle Models (BMW, MINI, Rolls Royce)
Figure 13: Supported BMW, MINI, and Rolls Royce Models
- For BMW:
- 1 Series: E81 / E82 / E87 / E88 and F20 / F21 / F52 (2017-present)
- 2 Series: F22 / F23 / F45 / F46 / F87 (2015-present)
- 3 Series: E30 (1982-1994) / E36 / E46 / E90 / E91 / E92 / E93 / F30 / F31 / F34 / F35 / F80 / G20 (2018-present)
- 4 Series: F32 / F33 / F36 / F82 / F83
- 5 Series: E28 (1981-1988) / E34 (1988-1996) / E39 / E60 / E61 / F07 / F10 / F11 / F18 / F90 (2017-present) / G30 / G31 (2017-present) and G38 (2017-present)
- 6 Series: E24 (1976-1989) / E63 / E64 / F06 / F12 / F13 / G32 (2017-present)
- 7 Series: E23 (1977-1987) / E32 (1986-1994) / E38 / E65 / E66 / E67 / E68 / F01 / F02 / F03 / F04 / G11 / G12 (2015-present)
- 8 Series: E31 (1990-1999) / G14 / G15 / G16 (2018-present)
- X Series: X1 E84 / F48 / F49 (2011-2017) / X2 F39 (2018 to date) / X3 E83 / F25 / G01 (2018 to date) / X4 F26 / G02 (2018 to date) / X5 E53 / E70, F15 / F85 / G05 (2018 to date) / X6 E71 / E72 / F16 / F86 / X7 / G07 (2018 to date)
- Z Series: Z1 E30 (1990-1999) / Z3 / E36 / Z4 / E85 / E86 / Z4 / E8 / Z8 / E52
- I Series: I3 / I01 / I8 / I12
- For MINI Series Chassis: R50/R52/R53/R55/R56/R57/R58/R59/R60/R61/F54/F55/F56/F60 (2017-present)
- For Rolls-Royce Series Chassis: RR1/RR2/RR3/RR4/RR5 (Only supports Maintenance Function A)
7. Warranty & Support
7.1 Software Updates
The Autophix 7910 offers lifelong free online software updates to ensure compatibility with new vehicle models and features. To update your device:
- Visit the official Autophix website and download the Ancel client update tool software.
- Connect your Autophix 7910 device to your computer using a USB cable.
- The update software is compatible with Windows 7/8/10. (Windows 8/10 can run the update software directly; Windows 7 requires driver installation. Click "install driver.bat" in the driver file to install the necessary drivers).
- Double-click "Update.exe" and follow the on-screen instructions to complete the update process.
Figure 14: Lifelong Free Online Update Process
7.2 Technical Support
For any questions regarding battery replacement, detailed operational problems, or other technical inquiries, please contact Autophix customer support. They will provide assistance to resolve your issues.
8. User Tips
- Battery Code Accuracy: When registering a new battery, ensure you correctly enter the 12-digit battery code. Incorrect entry can affect the accuracy of the product's battery management functions.
- Live Data Analysis: When reviewing live data, pay close attention to the Short Term Fuel Trim (STFT) and Long Term Fuel Trim (LTFT). These values are crucial for understanding how the Engine Control Unit (ECU) manages fuel delivery.
- Software Update Compatibility: The software update tool is only supported on Windows 7/8/10 operating systems. It is not compatible with Apple iOS laptops.
