1. Introduction
The REDRAGON TS68 is a high-performance 68-key mechanical gaming keyboard designed for versatility and an exceptional user experience. It features advanced tri-mode connectivity, allowing seamless switching between USB-C wired, 2.4G wireless, and Bluetooth 3.0/5.0 modes. With hot-swappable switches, vibrant RGB backlighting, and a compact design, the TS68 is engineered for both intense gaming and efficient work across various devices.
2. Package Contents
Please check the package for the following items:
- REDRAGON TS68 Mechanical Gaming Keyboard
- USB-C to USB-A Connecting Cable
- 2.4G Wireless Receiver
- Dismantling Tools (Keycap puller, Switch puller)
- Complimentary Switches (Quantity may vary based on keypad switch type)
- User Manual (This document)
3. Setup and Connection
The TS68 keyboard supports three connection modes: USB-C wired, 2.4G wireless, and Bluetooth. Ensure the keyboard is charged before initial wireless use.
3.1 Charging the Keyboard
The keyboard has a built-in 1600mAh Li-ion battery. Connect the USB-C cable to the keyboard's port and the other end to a USB power source (e.g., computer USB port, wall adapter). The keyboard can be used while charging.
3.2 Tri-Mode Connection
The TS68 supports multi-device connections and fast switching between modes.
3.2.1 2.4G Wireless Connection
- Locate the 2.4G wireless receiver in the package.
- Plug the 2.4G receiver into an available USB port on your computer or laptop.
- Turn on the keyboard. It should automatically connect to the receiver.
3.2.2 Bluetooth Connection (BT 3.0/5.0)
- Turn on the keyboard.
- Activate Bluetooth pairing mode on the keyboard (refer to specific key combination if available, typically FN + a number key for BT profiles).
- On your device (PC, laptop, tablet), go to Bluetooth settings and search for new devices.
- Select 'REDRAGON TS68' (or similar name) from the list of available devices to pair.
3.2.3 USB-C Wired Connection
- Connect the USB-C end of the cable to the keyboard's Type-C port.
- Connect the USB-A end of the cable to an available USB port on your computer or laptop.
- The keyboard will be recognized automatically and is ready for use.
4. Operating Instructions
4.1 Basic Keyboard Functions
The TS68 features a compact 68-key layout, saving approximately 20% more space compared to standard keyboards.
4.2 RGB Illumination Effects
The keyboard supports 20 preset backlighting modes and offers customization options. The innovative crystal transparent board enhances the RGB effects.
- Backlight Effect Switch: FN1 + PAGE UP
- Backlight Switch: FN1 + SPACE
- Speed Adjustment: FN1 + ← / →
- Brightness Adjustment: FN1 + ↑ / ↓
The keyboard also features a music sync mode for dynamic lighting.
4.3 Combined Function Keys (FN)
Utilize the FN key for various multimedia and system controls:
- FN + B: Previous song
- FN + M: Next song
- FN + N: Play/Pause
- FN + V: Stop Play
- FN + C: Mute
- FN + Z: Volume down
- FN + X: Volume up
- FN + 1: F1
- FN + 2: F2
- FN + 3: F3
- FN + 4: F4
- FN + 5: F5
- FN + 6: F6
- FN + 7: F7
- FN + 8: F8
- FN + 9: F9
- FN + 0: F10
- FN + -: F11
- FN + =: F12
- FN + "{": HOME
- FN + "}": END
- FN + ":": PRTSC (Print Screen)
- FN + "'": INSERT
4.4 Software Support
The keyboard is supported by professional software, allowing you to customize macros, design new lighting modes and effects, and configure keybindings for more efficient work and gaming. Please refer to the official REDRAGON website for software downloads and instructions.
5. Maintenance
5.1 Cleaning the Keyboard
To maintain your keyboard's performance and appearance:
- Use a soft, lint-free cloth to wipe the keycaps and chassis.
- For deeper cleaning, use compressed air to remove dust and debris from between the keys.
- Avoid using harsh chemicals or abrasive materials.
5.2 Hot-Swappable Switch Replacement
The TS68 features hot-swappable sockets compatible with most 3-pin and 5-pin mechanical switches, allowing for easy customization without soldering.
- Pull out the keycap: Use the keycap puller tool to gently remove the desired keycap.
- Press the buckle: Use the switch puller tool to press the two small buckles on the top and bottom sides of the switch.
- Pull out the switch: While pressing the buckles, gently pull the switch upwards to remove it from the PCB.
- Push switch: Align the pins of the new switch with the holes on the PCB and gently push it down until it clicks into place. Ensure the pins are straight to avoid bending.
- Install keycaps: Place the keycap back onto the new switch, pressing firmly until it is secure.
The keyboard also features customized satellite switches for enhanced stability and feel.
6. Troubleshooting
- Keyboard not responding: Ensure the keyboard is powered on. Check the connection mode (wired, 2.4G, Bluetooth) and ensure it's correctly paired or plugged in. Try restarting your computer.
- 2.4G wireless connection issues: Ensure the 2.4G receiver is securely plugged into a USB port. Try a different USB port. Ensure no strong interference sources are nearby.
- Bluetooth connection issues: Ensure Bluetooth is enabled on your device. Re-pair the keyboard if necessary. Check if the keyboard's battery is low.
- RGB lighting not working: Check the brightness settings using FN + ↑. Ensure the backlight effect is enabled (FN + SPACE).
- Keys not registering: If specific keys are not working, try replacing the switch for that key using the hot-swap instructions. Ensure the switch is fully seated.
- Battery not charging: Ensure the USB-C cable is properly connected to both the keyboard and a working power source. Try a different USB-C cable or power adapter.
7. Specifications
| Feature | Specification |
|---|---|
| Model | TS68 |
| Keypad | 68 keys |
| Connection | 2.4G Wireless, Bluetooth (BT 3.0/5.0), USB-C Wired |
| Keyboard Size | 315 x 105.5 x 34mm |
| Voltage (USB) | 5V=670mA |
| Voltage (Battery) | 3.7V=230mA |
| Weight | Approx. 511g |
| Interface Type | USB interface |
| Li-ion Battery | 1600mAh |
| Switch Type | Mechanical switch |
| Key Life | 100 million strokes |
| Switches Hot Swap | Yes (compatible with most 3-pin and 5-pin switches) |
| Backlight Type | Multicolor RGB (20 presets) |
| Keycap Material | ABS plastic (Two-colour spliced keycaps) |
| System Support | Win2000/XP/Vista/7/8/10/Linux/Mac etc. |
8. User Tips
- Optimize Battery Life: To extend battery life in wireless modes, consider reducing RGB brightness or turning off the backlight when not needed.
- Customization: Experiment with different switch types to find your preferred typing feel, taking advantage of the hot-swappable feature.
- Software for Advanced Control: Download the official REDRAGON software to unlock full customization potential, including macro programming and advanced lighting effects.
- Multi-Device Pairing: If you use the keyboard with multiple devices via Bluetooth, assign different Bluetooth profiles (e.g., FN+1, FN+2) to quickly switch between them.
- Firmware Updates: Periodically check the REDRAGON website for any firmware updates that might improve performance or add new features.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official REDRAGON website or contact your retailer. Keep your proof of purchase for warranty claims.
