Worx WX106 Rotary Tool User Manual

1. Introduction

Thank you for choosing the Worx WX106 Rotary Tool. This 8V cordless mini drill is designed for a wide range of precision tasks, including engraving, grinding, polishing, cutting, and drilling. Its compact size, variable speed control, and USB charging capability make it an ideal tool for DIY enthusiasts and professionals alike. Please read this manual carefully before operating the tool to ensure safe and efficient use.

2. Safety Information

Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury when using power tools.

• Work Area Safety: Keep your work area clean and well-lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
• Electrical Safety: Avoid body contact with earthed or grounded surfaces (e.g., pipes, radiators, ranges, refrigerators). Do not expose power tools to rain or wet conditions.
• Personal Safety: Always wear eye protection. Use hearing protection when operating for extended periods. Dress properly; avoid loose clothing or jewelry that can get caught in moving parts. Secure long hair.
• Tool Use and Care: Do not force the tool. Use the correct tool for your application. Disconnect the plug from the power source and/or the battery pack from the tool before making any adjustments, changing accessories, or storing power tools. Store idle tools out of the reach of children.
• Battery Tool Use and Care: Recharge only with the charger specified by the manufacturer. Do not use battery packs other than those specifically designated for the tool.

3. Package Contents

The Worx WX106 Rotary Tool package typically includes the following items:

1. Tool Box
2. WX106 Machine
3. Type-C Cable (for charging)
4. Polishing paste
5. Wrench (for installation/removal of accessories)
6. Rubber wheel (to connect Sand circle)
7. Sand circle (7, 8, 9, 10)
8. Grinding head (11)
9. Diamond grinding needle (12)
10. Milling cutter (13, 14, 15)
11. Drill bit (16)
12. Stainless steel flat brush (17)
13. Felt rod core (18)
14. Big felt (19, 20)
15. Small felt (21, 22)
16. Cutting blade rod core (connected with rubber emery blade/sandpaper/diamond saw blade/cutting blade/grinding blade) (23)
17. Cutting disc (24, 25)

4. Product Overview

Familiarize yourself with the components of your Worx WX106 Rotary Tool:

• Chuck Lock: Secures the accessory in place.
• LED Light: Provides illumination for the work area, turning on automatically when the tool starts. It turns off after 15 seconds of inactivity.
• Self-locking Button: Facilitates easy and quick changing of accessories.
• Power Switch: Turns the tool on and off.
• Grip Encapsulation Design: Ergonomic design for comfortable and secure handling.
• 5 Gear Speed Adjustment Button: Allows selection of desired operating speed.
• Speed Adjustment Indicator Light/Power Indicator Light: Displays current speed setting and battery level.
• USB Charge Port: For charging the internal battery.

5. Setup

5.1 Charging the Tool

Before first use, fully charge the Worx WX106 Rotary Tool using the provided Type-C USB cable. Connect the cable to the USB charge port on the tool and to a compatible USB power source (e.g., wall adapter, computer USB port). The power indicator lights will show the charging status.

5.2 Attaching Accessories

1. Ensure the tool is turned off.
2. Press and hold the self-locking button to lock the chuck.
3. Loosen the chuck lock by turning it counter-clockwise.
4. Insert the desired accessory bit into the chuck. Ensure the bit is fully seated.
5. Tighten the chuck lock by turning it clockwise until the accessory is securely held. Use the provided wrench for extra tightening if necessary.
6. Release the self-locking button.

Note: When using sand rings for grinding, please ensure the screws are tightened and the sand ring is installed correctly to prevent it from slipping off during operation.

6. Operating Instructions

6.1 Powering On/Off

Press the Power Switch button to turn the tool on or off. The LED light will illuminate automatically when the tool is started and turn off after 15 seconds of inactivity.

6.2 Speed Adjustment

The WX106 features 5 gear speed adjustments. Use the '+' and '-' buttons to increase or decrease the operating speed. The speed adjustment indicator lights will show the current setting. Adjust the speed according to the material and application for optimal results.

6.3 Gear Memory Function

The tool is equipped with a gear memory function. If you turn off the tool for a short break or temporary business and restart it within 10 minutes, it will maintain the original speed setting, eliminating the need for repeated adjustments.

6.4 Applications

The Worx WX106 is versatile for various DIY and crafting projects:

• Grinding: Suitable for frosting operations on wood, plastic, steel, aluminum, brass, shells, jade, ceramics, and other materials.
• Engraving: Ideal for detailed carving on wood, plastic, steel, aluminum, brass, shells, jade, ceramics, glass, and other materials.
• Polishing: For polishing operations on wood, plastic, steel, aluminum, brass, shells, jade, ceramics, and other materials.
• Cutting: Suitable for cutting operations on steel, aluminum, brass, and other materials.
• Drilling: For drilling on wood, plastic, and other materials.

For specific bit details and recommended speed levels for various materials, refer to the table below:

7. Maintenance

7.1 Cleaning

Regularly clean the tool to ensure optimal performance. Use a soft, dry cloth to wipe down the exterior. Do not use harsh chemicals or abrasive cleaners. Ensure the ventilation openings are clear of dust and debris.

7.2 Heat Dissipation

The WX106 is designed with a self-contained fan motor for fast heat dissipation, preventing overheating during prolonged use.

7.3 Accessory Storage

Store all accessories in the provided tool box to keep them organized and protected from damage.

8. Troubleshooting

If you encounter any issues with your Worx WX106 Rotary Tool, please refer to the following common troubleshooting steps:

• Tool not turning on: Ensure the battery is charged. Connect the tool to the USB charger and check if the power indicator lights illuminate.
• Accessory bit loose: Make sure the self-locking button was pressed during installation and the chuck lock is tightened securely. Use the wrench for proper tightening.
• Reduced performance: Check if the correct speed setting is selected for the material. Ensure the accessory bit is not worn or damaged.
• Overheating: While the tool has a self-contained fan, continuous heavy-duty use without breaks can still generate heat. Allow the tool to cool down if it feels excessively warm.

For persistent issues not covered here, please contact customer support.

9. Specifications

10. User Tips

No specific user tips were available from reviews or Q&A for this product at the time of manual creation.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.