1. Introduction
This manual provides essential information for the safe and effective use of your DIBEA F20MAX/FS006/FS007 wireless electric floor brush head. This accessory is designed to replace the original brush head on compatible DIBEA vacuum cleaner models, ensuring optimal cleaning performance. Please read this manual thoroughly before installation and use.
2. Safety Information
- Always ensure the vacuum cleaner is turned off and unplugged before installing, removing, or cleaning the brush head.
- Keep fingers, hair, and loose clothing away from the rotating brush during operation.
- Do not use the brush head on wet surfaces or to pick up liquids.
- Inspect the brush head regularly for any damage or blockages. Do not use if damaged.
- This product is intended for household use only.
3. Package Contents
Your package should contain the following item:
- 1 x Wireless Electric Floor Brush Head (including rolling brush)
4. Specifications
| Attribute | Value |
|---|---|
| Model Number | DIBEA F20MAX/FS006/FS007 |
| Type | Vacuum Cleaner Parts |
| Vacuum Part Type | BRUSHES |
| Material | Plastic |
| High-concerned chemical | None |
| Origin | Mainland China |
5. Installation
Follow these steps to install the electric floor brush head onto your DIBEA vacuum cleaner:
- Ensure your DIBEA vacuum cleaner is powered off and unplugged from the charging adapter.
- If replacing an old brush head, locate the release button or latch on the existing brush head connection point and detach it.
- Align the new electric floor brush head with the connection point on the vacuum cleaner's main body or extension wand.
- Push the brush head firmly until it clicks securely into place. Gently tug to ensure it is properly seated.
- Once installed, you can power on your vacuum cleaner and test the brush head's operation.
Figure 1: DIBEA FS006 Electric Floor Brush Head (with green/grey rolling brush)
Figure 2: DIBEA FS007 Electric Floor Brush Head (with red/blue rolling brush)
6. Operating Instructions
The electric floor brush head operates in conjunction with your DIBEA wireless vacuum cleaner. Once installed, simply turn on your vacuum cleaner. The brush head's motor will activate, causing the rolling brush to spin, effectively agitating dirt and debris from various floor types. The specific cleaning modes and power settings are controlled by your vacuum cleaner's main unit.
7. Maintenance
Regular maintenance of your electric floor brush head ensures its longevity and optimal performance.
7.1 Cleaning the Rolling Brush
- Turn off and unplug the vacuum cleaner.
- Locate the release mechanism for the rolling brush (usually a latch or button on the side of the brush head).
- Remove the rolling brush.
- Use scissors or a brush cleaning tool to carefully cut and remove any tangled hair, threads, or fibers from the rolling brush.
- Wipe the rolling brush and its housing with a dry or slightly damp cloth. Ensure all parts are completely dry before reassembling.
- Reinsert the rolling brush, ensuring it clicks back into place securely.
7.2 Cleaning the Brush Head Exterior
- Wipe the exterior of the brush head with a soft, dry cloth.
- Do not use abrasive cleaners or solvents, as these may damage the plastic.
8. Troubleshooting
- Brush head not spinning: Ensure the brush head is correctly attached to the vacuum cleaner. Check for any blockages in the rolling brush or the brush head mechanism. Clean the rolling brush as described in Section 7.1.
- Reduced suction at the brush head: Check for blockages in the vacuum cleaner's hose or the brush head's air channels. Ensure the rolling brush is clean and free of debris.
- Unusual noise from the brush head: Turn off the vacuum immediately. Check the rolling brush for foreign objects or damage. Ensure the brush is properly installed.
9. User Tips
- For optimal performance, regularly check and clean the rolling brush, especially if you have pets or long hair in your household.
- If you notice a decrease in cleaning efficiency, a thorough cleaning of the brush head and the vacuum's filters can often resolve the issue.
10. Warranty and Support
This product is covered by the manufacturer's standard warranty. For warranty claims, technical support, or replacement parts, please contact the seller or the DIBEA customer service directly. Keep your purchase receipt as proof of purchase.
