1. Introduction
The ATORCH CC085 is a versatile Type-C PD3.1 charger detection tester designed to monitor and measure various electrical parameters of charging devices and power banks. It provides real-time data for voltage, current, power, electric energy, and capacity, featuring a high-definition rotating color screen and intuitive touch button controls. This manual provides essential information for the safe and effective use of your CC085 tester.
2. Product Overview
The CC085 features a compact design with a clear IPS HD colorful display. It includes C Male and C Female input/output ports for versatile connectivity. The device utilizes shell induction touch buttons for navigation and settings adjustment, and a G-Sensor for automatic screen rotation.
2.1 Interface Function Diagram
Refer to the diagram below for an understanding of the CC085's physical interfaces and display areas.
Image: CC085 Interface Function Diagram showing C Male/Female ports, measurement data display, and touch sensing points.
- C Male Input/Output: Connects to the power source (e.g., charger).
- C Female Input/Output: Connects to the device being charged (e.g., phone, laptop).
- Measurement Data Display Area: The primary screen for real-time parameter display.
- Touch Sensitive Indicator Light: Provides visual feedback for touch interactions.
- Touch Sensing Points: Used for switching interfaces, resetting data, and adjusting settings.
3. Setup and Connection
To ensure proper operation and display, it is crucial to connect both the charger and the device you intend to test. The CC085 will only display data when a load protocol is detected and power is supplied.
- Connect the C Male input/output of the CC085 to your Type-C charger or power source.
- Connect the C Female input/output of the CC085 to your device (e.g., smartphone, laptop, power bank) that needs to be charged or tested.
- Ensure the display screen is facing you to avoid misinterpretation of data.
Image: CC085 tester connected between a charger and a smartphone, displaying charging parameters.
Image: CC085 tester monitoring laptop charging, showing real-time voltage and current.
4. Operating Instructions
4.1 Basic Navigation
The CC085 uses a touch button sensing area located directly below the product. A single click on this area cycles through different display interfaces.
4.2 Interface Functions and Controls
- Cyclic Interface Switching: Single-click the touch button to move to the next display interface.
- Reset Cumulative Data (Interface 1): Triple-click the touch button on the first interface to reset cumulative data (Wh, mAh, Time).
- Clear Max Data Recording (Interface 2): Triple-click the touch button on the second interface to clear recorded maximum values (Max V, Max A, Max W).
- Reverse Display Settings (Interface 3): Triple-click the touch button on the third interface to enter reverse display settings. While in this mode, double-click to add a value and single-click to subtract. Triple-click again to exit.
- Pause/Continue Curve (Interface 4): Triple-click the touch button on the fourth interface to pause or resume the real-time curve display.
- Language Selection (Interface 5): Triple-click the touch button on the fifth interface to switch between Chinese and English.
- Reset No-Load Current (Interface 6): Triple-click the touch button on the sixth interface to reset the no-load current to zero.
4.3 Screen Rotation
The CC085 features a built-in G-Sensor that enables automatic 360-degree screen rotation, adjusting the display orientation based on the device's physical position for optimal viewing.
Image: Multiple CC085 testers demonstrating the 360-degree automatic screen rotation feature.
4.4 Real-time Curve Display
The device can display real-time voltage and current curves, allowing users to analyze charging process fluctuations. The curve display can be paused and resumed by touching the sensing point during the process.
Image: CC085 tester displaying a real-time voltage and current curve.
4.5 Screen Shutdown Function
The CC085 includes a screen shutdown function, particularly useful for night charging, to conserve power and reduce light emission. This function is part of its PD protocol charger design, ensuring zero power consumption when there is no current.
Image: Illustration of the CC085's automatic screen shutdown feature when no current is detected.
5. Maintenance
To ensure the longevity and accuracy of your ATORCH CC085 tester, follow these general maintenance guidelines:
- Keep the device clean and free from dust and moisture. Use a soft, dry cloth for cleaning.
- Avoid exposing the device to extreme temperatures or direct sunlight for prolonged periods.
- Handle with care to prevent physical damage to the ports or screen.
- Store the device in a safe place when not in use.
6. Troubleshooting (FAQ)
- Q1: Why does the product not display when plugged into the charger separately?
- A1: The Type-C port of most chargers defaults to no voltage output without a connected load. The CC085 will only receive power and display data when a load (e.g., a phone) is connected and the charger detects a load protocol.
- Q2: Why can't the test meter measure 10A or 120W on my product charger?
- A2: The CC085 displays real-time charging parameters during the actual charging process. The values marked on your charger are its maximum rated power, which may not always be output during typical use, especially if the connected device does not draw that much power.
- Q3: Why does it occasionally display a current of 0.01-0.02A when no load is connected?
- A3: This product uses bidirectional current detection, and a small no-load current (zero drift) is a normal phenomenon. You can reset it to zero by removing any load and quickly triple-touching the current reset interface (Interface 6).
- Q4: How do I reset the capacity data?
- A4: On the main interface (Interface 1), quickly triple-click the touch button. The capacity data (Wh, mAh) will reset to zero. Pay attention to the rhythm; two green indicator lights on the screen will illuminate to confirm the reset.
- Q5: How do I switch to the next testing interface?
- A5: Simply single-click the touch button to cycle through the available interfaces.
- Q6: Does the CC085 support Bluetooth?
- A6: No, this tester does not support Bluetooth connectivity.
- Q7: How do I set the battery capacity parameter value?
- A7: Navigate to the battery capacity parameter interface. Triple-click the touch button to enter voltage setting mode (3.0-5.0V); double-click to increase the value. Triple-click again to switch to efficiency ratio setting (80-100%); double-click to increase, single-click to decrease. Triple-click once more to exit the setting mode. (Note: Parameters are typically pre-set and usually do not require adjustment).
- Q8: Does this tester have a screen shutdown function?
- A8: Yes, you can switch to the dedicated off-screen interface for this function, which is useful for night charging.
- Q9: Does it support Chinese/English?
- A9: Yes, the device supports both Chinese and English. Navigate to the language interface and triple-click the touch button to switch between the two languages.
7. Specifications
| Feature | Specification |
|---|---|
| Product Name | HD Rotating Color Screen Touch Type-C Tester |
| Model | CC085 |
| LCD Screen | IPS HD Colorful Display, 0.85 inch |
| Temperature Measure | CPU Temperature |
| Power Supply Method | 48V Full Voltage Power Supply (USB DC Power) |
| Capacity Calculation | Based on electricity value |
| Gravity Induction | Gravity Rotary Screen (G-Sensor for 360° rotation) |
| Power Chip | DC-DC Switching Power Supply |
| Button Mode | Shell Induction Touch Buttons |
| Measure Voltage | DC 4.5-50V |
| Measure Current | 0-6A (Instant peak value 13A) |
| Measure Power | 0-600W |
| Measure Electric Energy | 0~9999Wh |
| Measure Capacity | 0~99999mAh |
| Power Consumption | <0.15W |
| Sampling Resistance | 0.001R |
| Data Retention Period | TA=55°C 20 years |
| Working Temperature | 0~45°C / 32~113°F |
| Product Size | 43mm * 36mm * 10mm |
| Interface Type | C Male and C Female |
| Bidirectional Current | Bidirectional 12A |
| TYPE-C Protocol | 16P PD3.1 Straight Through |
| Protocol Communication | CC1 CC2 protocol transmission D+D-Data Transmission |
| Product Weight | 8g |
| Accuracy Class | 1% (Software calibration technique) |
| DIY Supplies | Electrical |
| Housing | Plastic |
| Lock Screen Function | Yes |
| Peak Recording | Current, Voltage, and Power Peak Recording |
| Current Direction Indication | Yes |
Image: Technical parameter table for the CC085.
8. User Tips
- Mastering Touch Button Rhythm: When performing triple-click actions (e.g., resetting data, changing language), ensure your clicks are neither too slow nor too fast. The green indicator lights on the screen will confirm successful input.
- Understanding Curve Display: The real-time curve display provides a visual representation of voltage and current fluctuations during charging. While the exact time scale limit isn't specified, it's designed to show the current session's progress.
- Battery Capacity Settings: Although the device comes with pre-set battery capacity parameters, you can fine-tune them if needed. Remember the sequence: triple-click for voltage, then triple-click for efficiency, using double-clicks to increase and single-clicks to decrease values.
- No Bluetooth: This model does not include Bluetooth functionality.
9. Warranty and Support
For detailed information regarding warranty, service, and additional support, please refer to the official user manual PDF provided by the manufacturer. This document contains comprehensive information that may not be covered in this summary.
You can access the full user manual here: User Manual (PDF)
