KuWFi 4G CPE Outdoor Router Instruction Manual

1. Introduction

The KuWFi 4G CPE Outdoor Router (Model: CPF905-CF5) is a versatile wireless device designed to provide high-speed internet access in various environments, both indoors and outdoors. It supports 4G LTE connectivity via a SIM card, eliminating the need for traditional broadband. With its robust design and multiple operating modes, it offers flexible and reliable network solutions for homes, offices, and outdoor applications like IP camera surveillance.

Figure 1: KuWFi 4G CPE Outdoor Router providing internet to multiple devices.

2. Package Contents

Please check the package for the following items:

• KuWFi 4G CPE Outdoor Router (CPF905-CF5)
• Power Adapter (48V POE Adapter)
• Ethernet Cable
• User Manual
• SIM Card Adapter (to convert Nano SIM to Micro SIM)

Figure 2: Included items in the product package.

3. Product Overview

3.1 Device Layout and Indicators

Figure 3: Router dimensions and LED indicators.

The router features several LED indicators and ports:

• Power Light: Indicates power status.
• Wifi Light: Indicates Wi-Fi activity.
• WAN/LAN Light: Indicates WAN/LAN port activity.
• Wifi Signal: Indicates Wi-Fi signal strength.
• LTE: Indicates 4G LTE signal status.
• Ethernet Connect: Indicates Ethernet connection status.
• DC 12V 1A: Power input port.
• SIM Slot: For Micro SIM card.
• WAN/LAN Port: Ethernet port for WAN or LAN connection.
• RESET Button: To reset the device to factory defaults.

3.2 Key Features

• 4G LTE Connectivity: Up to 150 Mbps download and 50 Mbps upload speeds.
• Wi-Fi Speed: Up to 300 Mbps on 2.4GHz.
• Antennas: Equipped with 4 external antennas (2 for 4G LTE, 2 for Wi-Fi). The two middle antennas are detachable.
• Multi-User Support: Connects up to 10 wireless terminal devices simultaneously.
• Outdoor Durability: IP65 dustproof and waterproof, suitable for -20°C to 75°C and up to 3000m altitude.
• POE Powered: Supports standard 48V PoE power supply, simplifying installation with a single network cable.
• Advanced Functions: Supports port filtering (MAC/IP/port), port mapping, and DMZ settings.

Figure 4: Router with dedicated 2.4G and 4G LTE antennas.

4. Specifications

4.1 Supported Frequency Bands (EU Version)

This EU Version router supports the following frequency bands:

• 4G LTE FDD: B1/B3/B7/B8/B20 (2100/1800/2600/900/800MHz)
• 4G LTE TDD: B38/B39/B40/B41 (2600/1900/2300/2500MHz)
• 3G WCDMA: B1/B8 (2100/900MHz)
• 2G GSM: B3/B8 (1800/900MHz)
• EVDO: BC0

This version is designed to work in most areas of EU, Asia, Africa, and Oceania. Please confirm your SIM card's frequency band compatibility before use.

Figure 5: Supported frequency bands for the EU Version.

5. Setup

5.1 SIM Card Installation

1. Ensure the router is powered off.
2. Locate the SIM card slot on the device.
3. Insert a standard Micro SIM card into the slot. If you have a Nano SIM, use the provided SIM adapter.
4. Ensure the SIM card is activated and its PIN code is disabled.

Figure 6: Inserting a standard SIM card into the router.

5.2 Powering On and Initial Connection

1. Connect the 48V PoE adapter to the router's power input port.
2. Connect an Ethernet cable from the PoE adapter's LAN port to the router's WAN/LAN port.
3. Plug the PoE adapter into a power outlet.
4. The router will power on, and indicator lights will illuminate.
5. For initial configuration, connect your computer to the router's LAN port using an Ethernet cable, or connect to the default Wi-Fi network (SSID: 4G-CPE-XXXX, Password: 1234567890).

Figure 7: Connecting the router using the PoE adapter.

Figure 8: Connecting a computer to the router's LAN port for initial setup.

6. Operating Modes

The KuWFi 4G CPE Outdoor Router supports multiple operating modes to suit different networking needs:

• AP Mode (Access Point Mode): In this mode, the router acts as a wireless access point, extending an existing wired network wirelessly. A 4G SIM card is not required for this mode.
• WiFi Mode (Wireless Router Mode): The router uses a 4G SIM card to access the internet and then broadcasts a Wi-Fi signal for wireless devices.
• Wired Mode: The router uses a 4G SIM card for internet access and provides a wired connection through its LAN port.

Figure 9: Router operating in AP, WiFi, and Wired modes.

7. Configuration

7.1 Accessing the Web Interface

1. Ensure your device (computer or smartphone) is connected to the router via Ethernet or Wi-Fi.
2. Open a web browser and enter the default IP address: 192.168.199.1.
3. Enter the default username (admin) and password (admin) to log in.

7.2 APN Settings

If your SIM card is compatible but you cannot access the internet, you may need to configure the APN settings:

1. After logging into the web interface, navigate to Network Settings > APN.
2. Click Enable.
3. Modify the APN settings according to your SIM card's carrier information. You can usually find this information on your carrier's official website or by contacting their support.
4. Click Apply to save changes.

Figure 10: Web interface steps for APN and Wi-Fi settings.

Figure 11: APN configuration page.

7.3 Wi-Fi Name and Password

To change your Wi-Fi network name (SSID) and password:

1. In the web interface, navigate to Wi-Fi Settings > Basic Settings.
2. Modify the Network Name (SSID) and Security Mode (e.g., WPA2-PSK/AES).
3. Enter your desired Pass Phrase (Wi-Fi password).
4. Click Apply to save changes.

8. Maintenance

8.1 Environmental Considerations

The KuWFi 4G CPE Outdoor Router is designed for both indoor and outdoor use, featuring IP65 dustproof and waterproof capabilities. It can operate in temperatures ranging from -20°C to 75°C and at altitudes up to 3000m. Ensure proper ventilation when used indoors.

Figure 12: Router's outdoor protection features.

8.2 Firmware Updates

Regularly check the manufacturer's website for firmware updates to ensure optimal performance and security. Follow the instructions provided with the firmware update package carefully.

8.3 Resetting to Factory Defaults

If you encounter persistent issues or forget your login credentials, you can reset the router to its factory default settings by pressing and holding the RESET button for approximately 10 seconds while the device is powered on. This will erase all custom configurations.

9. Troubleshooting

9.1 SIM Card Not Recognized / No Internet Access

1. Check SIM Card: Ensure the SIM card is correctly inserted and activated.
2. Disable PIN Code: Make sure the PIN code on your SIM card is disabled. This can usually be done using a mobile phone.
3. Configure APN: Follow the APN settings instructions in Section 7.2.
4. Check SIM Card Type: Verify that the SIM card is not an IoT card, virtual SIM card, or one with limited service that restricts use in routers/hotspots.
5. Physical Connection: If connecting via cable, ensure the Ethernet cable is firmly plugged into the LAN port and its indicator light is on. If not, try a different cable.
6. SIM Card Fit: If the router displays "NO Sim card" or "SIM card invalid!", try adding a small piece of paper behind the SIM card to ensure a snug fit, as shown in Figure 13.

Figure 13: Troubleshooting "No SIM card" error by adjusting SIM card fit.

9.2 Unstable Network Signal

1. Router Placement: If using indoors, consider placing the router outdoors for better signal reception, then use a Wi-Fi amplifier indoors if needed.
2. Lock Network Type: Access the settings page and try locking the network to 4G or 3G to improve stability.
3. Antenna Orientation: Adjust the external antennas for optimal signal reception.
4. Frequency Band: Ensure your SIM card's frequency band is well-covered in your location.

9.3 General Connectivity Issues

• Reboot: Power cycle the router by unplugging and replugging the power adapter.
• Check Cables: Ensure all Ethernet cables are securely connected.
• Device Compatibility: Confirm your connected devices (PC, Mac, iPhone, iPad, Android) meet the minimum operating system requirements (Windows XP SP3+, OS X v10.5.7+, iOS 5+, Android 2.3+).

10. User Tips

• SIM Card PIN: Always disable the PIN code on your SIM card before inserting it into the router to avoid connectivity issues.
• APN Configuration: If automatic internet connection fails, manually configure the APN settings using information from your mobile carrier.
• Signal Strength: For best performance, especially in areas with weak indoor signals, consider installing the router outdoors and using a Wi-Fi amplifier indoors to extend coverage.
• Cable Connection Check: If you suspect a router issue, connect it directly to a computer via an Ethernet cable to verify basic functionality before troubleshooting wireless connections.

11. Warranty and Support

The KuWFi 4G CPE Outdoor Router comes with a 1-year warranty period. If any quality problems arise within this period, the store supports free return and replacement of new products.

For any questions or support needs, please contact customer service. They are available to assist you within 24 hours.

12. Product Video