1. Introduction
This manual provides essential information for the safe and efficient use of your INMOTION L6/Lively Electric Scooter Charger. Please read this manual thoroughly before using the charger and retain it for future reference.
2. Important Safety Information
⚠ CAUTION:
- Please mind potential fire risk and strictly follow the instruction manual for charging and storage.
- HAZARDOUS AREA! INDOOR USE ONLY!
- Do not remove this cover. Servicing should only be performed by trained service personnel.
- Keep out of reach of children.
- Do not expose the charger to water or excessive moisture.
- Use only with compatible INMOTION L6/Lively Electric Scooters.
3. Package Contents
Verify that all items are present and in good condition:
- 1 x INMOTION Electric Scooter Charger (Model: XVE-5460200)
- 1 x AC Power Cable (specific to region: UK, US, or EU plug)
Figure 1: INMOTION L6/Lively Electric Scooter Charger with specifications. Input: 200-240V, 50/60Hz, 2.5Amax. Output: 54.6V, 2.0A.
Figure 2: INMOTION charger with a US plug power cable.
Figure 3: INMOTION charger with an EU plug power cable.
Figure 4: INMOTION charger with a UK plug power cable.
4. Specifications
| Feature | Detail |
|---|---|
| Model | XVE-5460200 |
| Input Voltage | 200-240V AC |
| Input Frequency | 50/60Hz |
| Max Input Current | 2.5Amax |
| Output Voltage | 54.6V DC |
| Output Current | 2.0A |
| LED Indicator | Green (< 400mA) |
| Compatibility | INMOTION L6/Lively Electric Scooter |
Figure 5: Close-up of the INMOTION charger label, highlighting input (200-240V AC, 50/60Hz, 2.5Amax) and output (DC 54.6V, 2.0A) specifications, and LED indicator status (Green < 400mA).
5. Setup Instructions
- Connect AC Power Cable: Insert the AC power cable into the charger's input port (refer to Figure 6). Then, plug the other end of the AC power cable into a suitable wall outlet (200-240V).
- Connect to Scooter: Locate the charging port on your INMOTION L6/Lively Electric Scooter. Insert the charger's output connector (the yellow connector) firmly into the scooter's charging port.
- Verify Connection: Ensure both connections are secure before proceeding.
Figure 6: Rear view of the INMOTION charger, showing the power input port.
Figure 7: INMOTION charger unit, showing the power output cable with the yellow connector.
6. Operating Instructions
Once the charger is properly connected to both the power outlet and the scooter, the charging process will begin automatically.
- Charging Indicator: The charger features an LED indicator. When the scooter is charging, the LED will typically display a specific color (e.g., red). Once the scooter's battery is fully charged, the LED will change to green.
- Charging Time: Charging time varies depending on the battery level and capacity of your scooter. Refer to your scooter's manual for estimated charging times.
- Disconnecting: Once charging is complete, first disconnect the charger from the scooter, then unplug the AC power cable from the wall outlet.
7. Maintenance
- Cleaning: Use a dry, soft cloth to clean the charger. Do not use liquid cleaners or solvents.
- Storage: Store the charger in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
- Cable Care: Avoid bending or crimping the power cables excessively. Do not place heavy objects on the cables.
- Inspection: Periodically inspect the charger and cables for any signs of damage. If damage is found, discontinue use immediately and seek professional assistance.
8. Troubleshooting
If you encounter issues with your charger, try the following steps:
- Charger Not Working: Ensure both the AC power cable and the scooter connection are firmly plugged in. Try plugging the AC cable into a different wall outlet to rule out a faulty power source.
- LED Not Changing Color: If the LED indicator does not change from charging status (e.g., red) to fully charged status (green) after an extended period, consult your scooter's manual or contact support.
- Overheating: If the charger feels excessively hot, disconnect it immediately and allow it to cool down. Ensure it is used in a well-ventilated area.
If problems persist, contact the seller or a qualified service technician.
9. User Tips
No specific user tips are available from provided reviews or Q&A content at this time. Always follow the safety guidelines for optimal performance and longevity of your charger and scooter battery.
10. Warranty and Support
For warranty information and technical support, please refer to the documentation provided with your original purchase or contact the seller directly. Keep your proof of purchase for warranty claims.
