1. Product Overview
The FENVI AC1200 is a high-performance PCI-E wireless adapter designed for desktop computers, providing dual-band Wi-Fi connectivity (2.4GHz and 5GHz) and Bluetooth 4.0 capabilities. It supports the 802.11AC wireless standard, offering speeds up to 1200Mbps for a fast and reliable internet experience.
Package Contents
- WLAN Card (FV-AC1200)
- Antennas (x2)
- Low Profile Bracket
- USB Cable (for Bluetooth functionality)
- Screw
- Quick Start Guide
2. Setup and Installation
2.1 Hardware Installation
- Power Off Your Computer: Before starting, ensure your computer is completely powered off and unplugged from the power outlet.
- Open Computer Case: Remove the side panel of your computer case to access the motherboard.
- Locate a PCI-E Slot: Identify an available PCI-E slot on your motherboard. The FV-AC1200 is compatible with PCI-E x1, x4, x8, and x16 slots. Do NOT use a standard PCI slot.
- Install the Wireless Card: Carefully insert the FENVI AC1200 card into the chosen PCI-E slot until it is firmly seated. Secure the card with a screw if your case requires it. If you have a small form factor PC, you may need to replace the standard bracket with the included low-profile bracket.
- Connect Bluetooth USB Cable: Locate a 9-pin USB header on your motherboard. Connect the provided USB cable from the wireless card to this 9-pin USB header on the motherboard. This connection is essential for enabling the Bluetooth functionality of the card.
- Attach Antennas: Screw the two included antennas onto the connectors on the back of the wireless card. Adjust their orientation for optimal signal reception.
- Close Computer Case: Replace the side panel of your computer case and reconnect the power cable.
2.2 Driver Installation
After hardware installation, you need to install the drivers for the wireless adapter to function correctly.
- Power On Computer: Start your computer.
- Driver Source: Drivers can typically be found on the included CD. If you do not have a CD drive or prefer to download the latest drivers, please visit the official FENVI website: https://www.fenvi.com/drive.html?keyword=FV-AC1200.
- Install Drivers: Follow the on-screen instructions to install the Wi-Fi and Bluetooth drivers. Restart your computer if prompted.
Note: This card is designed for desktop PCs and is compatible with Microsoft Windows 7/8/10/11 (64-bit). It does not support IBM/Thinkpad/Lenovo/HP laptops.
3. Operating Instructions
3.1 Wi-Fi Connectivity
- Once drivers are installed, your computer should detect available Wi-Fi networks.
- Click on the Wi-Fi icon in your system tray (usually bottom-right corner on Windows) to view available networks.
- Select your desired network and enter the password to connect.
- The FV-AC1200 supports dual-band operation (2.4GHz and 5GHz). For optimal speed (up to 867Mbps), connect to a 5GHz network. The 2.4GHz band offers wider coverage at speeds up to 300Mbps.
3.2 Bluetooth Connectivity
- Ensure the USB cable for Bluetooth is correctly connected to your motherboard's 9-pin USB header.
- Go to your computer's Bluetooth settings (e.g., Windows Settings > Devices > Bluetooth & other devices).
- Turn on Bluetooth and click "Add Bluetooth or other device" to pair with your Bluetooth peripherals (headphones, speakers, controllers, etc.).
4. Maintenance
- Keep Drivers Updated: Regularly check the FENVI official website for the latest drivers to ensure optimal performance and security.
- Antenna Placement: Adjust the antennas to an upright position or angle them for the best signal strength. Avoid placing obstructions near the antennas.
- System Ventilation: Ensure your computer case has adequate ventilation to prevent overheating, which can affect the performance of internal components, including the wireless card.
- Cleanliness: Periodically clean dust from inside your computer case, especially around the PCI-E slot and the wireless card, to maintain proper airflow.
5. Troubleshooting
5.1 Wi-Fi Issues
- No Wi-Fi Networks Detected:
- Ensure the Wi-Fi drivers are correctly installed. Check Device Manager for any yellow exclamation marks next to the network adapter.
- Verify that the antennas are securely attached to the card.
- Check if Wi-Fi is enabled in your operating system settings.
- Slow Wi-Fi Speed:
- Ensure your router is configured for 80MHz channel width to achieve maximum speeds (up to 1200Mbps).
- Try connecting to the 5GHz band if available, as it generally offers higher speeds with less interference.
- Reduce physical obstructions between your computer and the Wi-Fi router.
- Update your router's firmware.
5.2 Bluetooth Issues
- Bluetooth Not Working/Not Detected:
- The Bluetooth function requires the internal USB cable to be connected from the wireless card to the motherboard's 9-pin USB header. Verify this connection is secure.
- Ensure Bluetooth drivers are installed. Check Device Manager for any issues.
- Check if Bluetooth is enabled in your operating system settings.
- Difficulty Pairing Devices:
- Ensure the Bluetooth device you are trying to pair is in pairing mode.
- Move the Bluetooth device closer to your computer.
- Remove and re-add the device in your computer's Bluetooth settings.
5.3 General Issues
- Card Not Recognized by System:
- Ensure the card is fully seated in the PCI-E slot.
- Try installing the card in a different PCI-E slot if available.
- Verify your operating system (Windows 7/8/10/11 64-bit) is supported.
- Driver Download Issues:
- If the included CD driver is not working or you don't have a CD drive, download the latest drivers directly from the FENVI official website: https://www.fenvi.com/drive.html?keyword=FV-AC1200.
6. Specifications
| Feature | Specification |
|---|---|
| Model Name | FV-AC1200 |
| Brand | fenvi |
| Interface Type | PCI Express (PCI-E x1/x4/x8/x16) |
| Wireless Type | 802.11ac (Wi-Fi 5) |
| Frequency Band | Dual-Band (2.4GHz & 5GHz) |
| Wireless Transmission Rate | Up to 1200Mbps (2.4GHz: 300Mbps, 5GHz: 867Mbps) |
| Bluetooth Version | Bluetooth 4.0 |
| Supported Operating Systems | Windows 7/8/10/11 (64-bit) |
| Heat Dissipation | Supported |
| Applicable Network Type | Gigabit Ethernet compatible (Wireless adapter) |
| Package Dimensions (L x W x H) | 17 cm x 12 cm x 4 cm |
| Package Weight | 0.148 kg |
7. Warranty and Support
For technical support, driver downloads, and warranty information, please visit the official FENVI website:
Ensure you have your product model (FV-AC1200) and purchase details ready when contacting support.
8. User Tips
- Driver Installation Flexibility: If you don't have a CD drive, remember that all necessary drivers can be downloaded directly from the FENVI official website. This is often the best way to get the most up-to-date drivers.
- Bluetooth Activation: Always double-check that the small USB cable is securely connected between the wireless card and your motherboard's 9-pin USB header. Bluetooth will not function without this connection.
- Optimal Wi-Fi Performance: For the fastest Wi-Fi speeds, ensure your router supports and is configured for 5GHz operation and 80MHz channel width. Connecting to the 5GHz band will generally provide a quicker and more stable connection, especially in congested areas.
- System Compatibility: This card is specifically designed for desktop computers running Windows 7, 8, 10, or 11 (64-bit versions). It is not compatible with laptops, including specific models from IBM, Thinkpad, Lenovo, or HP.
