Desktop Wireless Adapter Installation Manual

Product Components

This guide details the installation of the FENVI PCE-AXE210S Wireless PCI-E Adapter. Ensure you have the following components:

PCI-E Wireless Network Card
High Gain Antennas (2x) ?
Mounting Screws ?
USB Bluetooth Cable (for Bluetooth functionality) ?
Full-Height Bracket (pre-installed or included)
8cm Low-Profile Bracket (alternative)

The adapter is designed to fit into standard PCI Express x1 slots and is also compatible with PCI-E x4, x8, and x16 slots.

Installation Steps

Step 1: Install the PCI-E Card

Select the appropriate bracket for your computer case. The adapter comes with a standard full-height bracket. For smaller cases, you can swap it for the included 8cm low-profile bracket.

Insert the PCI-E network card firmly into an available PCI Express x1 slot on your motherboard. Ensure it is fully seated.

Secure the bracket to the computer case using the provided mounting screws. ?

Diagram Description: An illustration shows the PCI-E card being inserted into a motherboard slot. Two options for bracket installation are displayed: one using the full-height bracket and another using the 8cm low-profile bracket.

Step 2: Connect the Bluetooth Cable

If your wireless card includes Bluetooth functionality, connect the USB Bluetooth cable.

Locate a 9-pin USB header on your motherboard, typically labeled "USB" or similar. Connect the USB Bluetooth cable to this header. The connector is keyed for correct orientation.

Diagram Description: A close-up shows the USB Bluetooth cable connecting to a 9-pin internal USB header on the motherboard.

Step 3: Attach Antennas

Screw the high-gain antennas onto the corresponding connectors on the back of the PCI-E card. Ensure they are finger-tight.

Diagram Description: An illustration shows the two high-gain antennas being screwed onto the rear connectors of the PCI-E card.

Final Checks

Ensure all connections are secure and the card is properly mounted. You can now close your computer case and proceed with driver installation.

	FENVI FV-AXE3000 Desktop Wireless Network Adapter Installation Manual Comprehensive installation guide for the FENVI FV-AXE3000 desktop wireless network adapter, covering hardware setup, Bluetooth connection, antenna installation, and FCC compliance information.
	fenvi WIFI 6 AX900 Driver Free Installation Guide A step-by-step guide for installing the fenvi WIFI 6 AX900 wireless USB adapter using its driver-free installation feature. Learn how to connect to WiFi on Windows computers.
	FENVI WIFI 6 AX286 USB Adapter User Manual - High-Speed Wireless Connectivity Comprehensive user manual for the FENVI WIFI 6 AX286 USB Adapter. Learn how to install, connect, and troubleshoot this high-speed 802.11AX network card for Windows 10/11, featuring driver-free operation.